Easy
15-30 minutes
Genuine OEM replacement part, this item is sold individually.
The purpose of the 901551001 Intake Gasket is to create a seal between the Heat Dam and the cylinder head.
Over time because of the heat it is exposed to this gasket will deteriorate and will have to be replaced.
Intake Gasket 901551001
OEM part for: Homelite, Ryobi
Part Number: 901551001
$5.19
In Stock
Ships within 1 business day 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Intake Gasket will fit the following 91 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Ryobi
Homelite
Show More Compatible ModelsThis item works with the following types of products:
- Hedge Trimmer Parts
- Trimmer Parts
- Blower Parts
- Edger Parts
- Cultivator Parts
- Vacuum Parts
- Pruner Parts
Repair Videos ?
Watch the Repair Video for
Intake Gasket
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
6
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Easy repair
It fit my carb.perfectly. Engine runs li like new
Guest -
April 20, 2021
Verified Purchase
perfect fit. a snap to install.
the fresh gasket provided the seal needed between the adjoining parts to get my leaf blower up and running as it did when it was new. a lot less expensive than purchasing a new blower.
Guest -
March 27, 2020
Verified Purchase
Perfect fit, exactly what I needed.
The part got perfectly and performed flawlessly.
Guest -
August 26, 2019
Verified Purchase
worked as expected
Engine is working fine now
Guest -
July 22, 2019
Verified Purchase
Exactly what i needed !!
Exactly what i needed to fix my leaf blower
Guest -
July 1, 2019
Verified Purchase
Parts for my Leaf blower.
The parts I ordered were great. They fit the first time. No reordering parts. My leaf blower is working great again.
Guest -
June 28, 2019
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Intake Gasket
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Engine only ran with choke on.
Anthony - June 21, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Hedge Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Star screwdriver set
Took carburetor apart, cleaned and replaced gaskets.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The blower wouldnt stay running, just a few seconds
Robert - November 6, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Blower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Socket set, Special Carb jet adjustment tool
Removed air filter
Removed carburetor with a socket
Removed gas lines and throttle cable
Removed old intake gasket
Reassembled carburetor with new gasket
Replaced the fuel filter inside the tank
Primed the carb. Set the choke and throttle to full open
2 pulls it sputtered, 3rd pull it started
It ran fine barely had to tweak the jets
Very happy with results
Removed carburetor with a socket
Removed gas lines and throttle cable
Removed old intake gasket
Reassembled carburetor with new gasket
Replaced the fuel filter inside the tank
Primed the carb. Set the choke and throttle to full open
2 pulls it sputtered, 3rd pull it started
It ran fine barely had to tweak the jets
Very happy with results
Did you find this story helpful?
Thanks for voting and helping fellow customers!
No start
William - May 14, 2021
Tool Type
Blower
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers, Socket set, Nutdriver, Torx driver
Too many steps to list for three parts to list
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Main Jet of carburetor stopped up.
MIKE - July 28, 2019
Tool Type
Hedge Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Nutdriver, Toxo Sockets, MM Sockets, Plastic Hammer
Cleaning and readjusting both Low and High mixing screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Start and shut down.
Alberto - June 21, 2017
Tool Type
Hedge Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set
Very easy..pull of two nut to out old carburetor.... and replacement a gasket and new carburetor... check the fuel line...fill the tank and go...
Did you find this story helpful?
Thanks for voting and helping fellow customers!
My trimmer would not start,I had it for for nine yrs,and did not want to buy a new one, the carburetor diaphragm was no good
Rodney - May 22, 2017
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers, Wrench Set
It was easy just removed the run/choke cover, and removed the two bolts holding the carburetor, and the gas line and replace the carburetor and gaskets, bolt it back together, that was it!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Engine dies when choke is opened
Joseph - July 28, 2016
Tool Type
Hedge Trimmer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Star drivers
Disassemble covers, un-hook throttle cable from carb and remove carb. Pull shield and remove broken heat dam and gaskates. Replace heat dam and gaskets with new replacement parts. Re-assemble, start, and run!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Homelite blower Carburetor heat dam broke
Gilbert - July 3, 2016
Tool Type
Blower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Torx driver
Remove airbox and cover. Disconnect fuel lines, and remove the carburetor. Remove baffle, then heat dam. Install new parts in reverse order.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Heat dam broken
Levi - June 30, 2016
Tool Type
Blower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Nutdriver, Torx driver
1. Removed part of cover
2. Removed fuel hose from carb
3. Removed filter cover and nuts that held filter to base stud
4. Removed carb from studs with intake gasket removed screws, removed heat dam and dam gasket
5. Reversed to install new dam gasket. heat dam carb studs and screws
6. Install carb .and gasket. filter housing.filterand filter cover
7. Put fuel lines in place on carb .primed and started. job completed
2. Removed fuel hose from carb
3. Removed filter cover and nuts that held filter to base stud
4. Removed carb from studs with intake gasket removed screws, removed heat dam and dam gasket
5. Reversed to install new dam gasket. heat dam carb studs and screws
6. Install carb .and gasket. filter housing.filterand filter cover
7. Put fuel lines in place on carb .primed and started. job completed
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
