Medium
1-2 hours
This is a genuine Kohler replacement part that has been sourced from the original manufacturer to be used with small engines. The gasket is used to seal the connection between the carburetor, insulator, and heat shield. It is recommended to replace the gaskets when servicing the engine to make proper seals and connections when the parts are reassembled. This item is available as an individual replacement part.
Gasket-Carburetor 12 041 01-S
OEM part for: Kohler, MTD, Toro, Cub Cadet
Part Number: 12 041 01-S
$3.99
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Gasket-Carburetor will fit the following 1410 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
MTD
Kohler
Toro
30527 (230000001-230999999) Mid-size Mower, Proline Pistol Grip Hydro 15 Hp W/ 36-in. Sd Mower, 2003
30528 (230000001-230999999) Mid-size Mower, Proline Pistol Grip Hydro 15 Hp W/ 48-in. Sd Mower, 2003
Cub Cadet
Show More Compatible ModelsThis item works with the following types of products:
- Lawn Mower Parts
- Engine Parts
- Lawn Tractor Parts
This part replaces obsolete part #: KH-12-041-01, KOH 12 041 01-S, KH-12-041-01 (Not Shown)
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
4
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Great fit
Fit great and in good shape
Guest -
April 8, 2020
Verified Purchase
worked great
as yu state here
Guest -
February 16, 2020
Verified Purchase
Worked as expected
worked great
Guest -
September 21, 2019
Verified Purchase
Great!
Fit lik ed a glove, worked like a charm!
Guest -
April 22, 2019
Verified Purchase
Parts
I was very satisfied!!!
Guest -
May 26, 2020
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Gasket-Carburetor
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Parts fit & worked great
Faye - April 24, 2019
Tool Type
Lawn Tractor
Difficulty
Easy
Time
30-60 minutes
Tools Used
Pliers, Socket set, Dremel
Used gaskets, fuel filter & heat shield as part of a carburetor freshen up on a MTD Yardman with Kohler 15 HP engine. Parts fit great, did have to trim the "ears" off the heat shield with a dremel tool to make the carburetor linkage clear...but that only took a minute & the old tractor fired right up & is running great!
I'll definitely use e-replacement parts again!
I'll definitely use e-replacement parts again!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Scotts L1742 had a dead carb on it. sat for years.
Rory - January 21, 2019
Tool Type
Lawn Tractor
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, Adjustable Wrench, Vice grips
After years of sitting due to a bad fuel solenoid and carb, I replaced the carb assembly and studs previously removed, connected the new carb and air intake, installed choke and throttle linkages, oiled the cylinder and rotated the fly wheel by hand. Once ready, I installed a new spark plug, changed the oil and borrowed another mowers battery, I fired up the scotts L1742 that has been sitting for almost 10 years! Some chugging, some smoking and oiling all the steering points a perfectly good mower with 75 hours on it is ready for service again.. why did I let it sit for so long?!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bent intake valve Kohler courage sv590s 0220 engine
frank - June 8, 2018
Tool Type
Lawn Tractor
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, 10mm wrench standard sockets 10mm socket, spring compressor
Removed 2-bolts from exhaust pipe, took off muffler and bracket and muffler heat guard. Valve cover, and valve head, on work bench took out retainers, caps, springs valves, push rods. Then cleaned everything.put in new valves, and replaced all parts and gaskets. Before starting project I needed to take out carburetor assembly, air filter assembly.make sure to gap valves. Need to torque bolts on head and valve cover. Clean off gasket glue stuck on heads,valve covers. Needed a tool to compress springs. I used vise grips. you need t-15 torx and 10mm wrench. Standard sockets, and 10mm socket. Buy a gasket kit then you have all gaskets needed for project,
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Ron - April 26, 2018
Tool Type
Lawn Tractor
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver
1995 Toro Wheel Horse 265H lawn tractor with Kohler CV15 engine. Removed cooling shroud and covers. Removed mouse nest from around cylinder and head which is apparently what caused tractor to overheat leading to blown head gasket. Removed air breather, carburetor, valve cover and head. Inspected mechanical parts... all ok. Ordered new gaskets from eReplacementParts.com. Parts arrived very quickly. Reassembled engine and then tractor. Runs great!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Gasket were bad and leaked
Curley - February 17, 2018
Tool Type
Lawn Tractor
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Wrench Set, Nutdriver, Adjustable Wrench
Removed carburetor and shield, replaced gaskets. Checkout Great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Lawn tractor was hard to start and engine would knock under a load
Matt - January 13, 2018
Tool Type
Lawn Tractor
Difficulty
Expert
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, Adjustable Wrench, Cordless impact, torque wrech
1 Removed hood
2 Removed deck and belt
3 Removed drive belt and drive pulley from engine
4 Removed battery and all wires attached to engine
5 Removed muffler
6 Removed 4 bolts holding engine on the frame
7 Removed engine
8 Removed pan off bottom of engine removed and installed a new used cam shaft and lifters then put engine back together with all new gaskets
2 Removed deck and belt
3 Removed drive belt and drive pulley from engine
4 Removed battery and all wires attached to engine
5 Removed muffler
6 Removed 4 bolts holding engine on the frame
7 Removed engine
8 Removed pan off bottom of engine removed and installed a new used cam shaft and lifters then put engine back together with all new gaskets
Did you find this story helpful?
Thanks for voting and helping fellow customers!
25+ year old Troy Bilt lawn tractor with Kohler engine. Throttle shaft seal worn off, linkage tab broken off, & throttle shaft was so worn that it was surrounded with brass dust. It would no longer
Howard - March 25, 2017
Tool Type
Engine
Difficulty
Medium
Time
15-30 minutes
Tools Used
Pliers, Socket set, Nutdriver, Small torx driver to remove butterfly from throttle shaft
1. Removed air cleaner.
2. Removed air cleaner box from the carb.
3. Removed choke & throttle linkages from choke & throttle
4. Removed carb body. This took a little tugging, twisting because the gasket was stuck to both the carb body & intake port. Scraped old gasket of both surfaces.
5. Removed butterfly from throttle shaft.
6. Replaced throttle shaft & seal; reinstalled butterfly on shaft.
7. Installed new gasket. I like to use a thin film of grease on gaskets but maybe that's just me.
8. Repeated steps 4-3-2-1 using "replace" instead of "removed".
I thought my chances of getting replacement parts for an engine this old were about zero. Thanks to eReplacementParts, this old Kohler is running like a top! (It helps, too, that it's a Kohler.)
2. Removed air cleaner box from the carb.
3. Removed choke & throttle linkages from choke & throttle
4. Removed carb body. This took a little tugging, twisting because the gasket was stuck to both the carb body & intake port. Scraped old gasket of both surfaces.
5. Removed butterfly from throttle shaft.
6. Replaced throttle shaft & seal; reinstalled butterfly on shaft.
7. Installed new gasket. I like to use a thin film of grease on gaskets but maybe that's just me.
8. Repeated steps 4-3-2-1 using "replace" instead of "removed".
I thought my chances of getting replacement parts for an engine this old were about zero. Thanks to eReplacementParts, this old Kohler is running like a top! (It helps, too, that it's a Kohler.)
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
