eReplacementParts.com
877-346-4814
MTD Parts
Repair Parts Home  Lawn Equipment Parts  MTD Parts  12 041 01-S Gasket-Carburetor
Grid squares measure 1x1 inch

Gasket-Carburetor

Part Number: 12 041 01-S
KohlerMTDToroCub Cadet
Availability: 11 in stock
Price: $2.99
Ships within 1 business day

*This part replaces obsolete part #: KH-12-041-01, KOH 12 041 01-S and KH-12-041-01 (Not Shown).

Product Information
Manufacturer: Kohler, MTD, Toro, Cub Cadet
Product Number: 12 041 01-S
Classification: Part
Weight: 0.02 lbs.
Shipping: Ships Worldwide
Description:
This is a genuine Kohler replacement part that has been sourced from the original manufacturer to be used with small engines. The gasket is used to seal the connection between the carburetor, insulator, and heat shield. It is recommended to replace the gaskets when servicing the engine to make proper seals and connections when the parts are reassembled. This item is available as an individual replacement part.
Frequently Purchased With
Compatibility

This part is compatible with the following machines:

MTD
Kohler
Expand the 150+ compatible machines
Products Compatibility

This item works with the following types of products:

  • • Engine
  • • Lawn Mower
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Lawn Tractor
Parts Used:
Gasket-A/C Base - 12 041 02-S
Gasket-Carburetor - 12 041 01-S
Filter-Fuel - 25 050 21-S
Deflector, Heat - 12 265 08-S
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Pliers, Socket set, Dremel
Parts fit & worked great
Used gaskets, fuel filter & heat shield as part of a carburetor freshen up on a MTD Yardman with Kohler 15 HP engine. Parts fit great, did have to trim the "ears" off the heat shield with a dremel tool to make the carburetor linkage clear...but that only took a minute & the old tractor fired right up & is running great!

I'll definitely use e-replacement parts again!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Tractor
Parts Used:
Stud, M6X1.0X116 - M-629116-S
Nut, Flg M6X1.0 - M-641060-S
Gasket-A/C Base - 12 041 02-S
Gasket-Carburetor - 12 041 01-S
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, Adjustable Wrench, Vice grips
Scotts L1742 had a dead carb on it. sat for years.
After years of sitting due to a bad fuel solenoid and carb, I replaced the carb assembly and studs previously removed, connected the new carb and air intake, installed choke and throttle linkages, oiled the cylinder and rotated the fly wheel by hand. Once ready, I installed a new spark plug, changed the oil and borrowed another mowers battery, I fired up the scotts L1742 that has been sitting for almost 10 years! Some chugging, some smoking and oiling all the steering points a perfectly good mower with 75 hours on it is ready for service again.. why did I let it sit for so long?!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Tractor
Parts Used:
Valve-Intake - 20 017 01-S
Gasket-A/C Base - 12 041 02-S
Gasket-Carburetor - 12 041 01-S
Valve, Exhaust - KH-20-016-01-S
Gasket, Valve Cover - KH-20-041-13-S
Gasket, Heat Deflector - 20 041 17-S
Lock, Retainer - KH-20-062-01-S
Repair Difficulty:
Medium
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, 10mm wrench standard sockets 10mm socket, spring compressor
Bent intake valve Kohler courage sv590s 0220 engine
Removed 2-bolts from exhaust pipe, took off muffler and bracket and muffler heat guard. Valve cover, and valve head, on work bench took out retainers, caps, springs valves, push rods. Then cleaned everything.put in new valves, and replaced all parts and gaskets. Before starting project I needed to take out carburetor assembly, air filter assembly.make sure to gap valves. Need to torque bolts on head and valve cover. Clean off gasket glue stuck on heads,valve covers. Needed a tool to compress springs. I used vise grips. you need t-15 torx and 10mm wrench. Standard sockets, and 10mm socket. Buy a gasket kit then you have all gaskets needed for project,
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Tractor
Parts Used:
Gasket, Cylinder Head - KH-12-041-10
Gasket-A/C Base - 12 041 02-S
Gasket-Carburetor - 12 041 01-S
Repair Difficulty:
Medium
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver
1995 Toro Wheel Horse 265H lawn tractor with Kohler CV15 engine. Removed cooling shroud and covers. Removed mouse nest from around cylinder and head which is apparently what caused tractor to overheat leading to blown head gasket. Removed air breather, carburetor, valve cover and head. Inspected mechanical parts... all ok. Ordered new gaskets from eReplacementParts.com. Parts arrived very quickly. Reassembled engine and then tractor. Runs great!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Tractor
Parts Used:
Gasket-A/C Base - 12 041 02-S
Gasket-Carburetor - 12 041 01-S
Gasket, Heat Deflector - 20 041 18-S
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Wrench Set, Nutdriver, Adjustable Wrench
Gasket were bad and leaked
Removed carburetor and shield, replaced gaskets. Checkout Great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Tractor
Parts Used:
Gasket-Exhaust - 12 041 03-S
Gasket, Cylinder Head - KH-12-041-10
Gasket-A/C Base - 12 041 02-S
Gasket-Carburetor - 12 041 01-S
Seal, Oil - 12 032 03-S
Gasket, Fuel Pump - 25 041 10-S
Repair Difficulty:
Expert
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, Adjustable Wrench, Cordless impact, torque wrech
Lawn tractor was hard to start and engine would knock under a load
1 Removed hood
2 Removed deck and belt
3 Removed drive belt and drive pulley from engine
4 Removed battery and all wires attached to engine
5 Removed muffler
6 Removed 4 bolts holding engine on the frame
7 Removed engine
8 Removed pan off bottom of engine removed and installed a new used cam shaft and lifters then put engine back together with all new gaskets
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Engine
Parts Used:
Shaft, Throttle W/Lever & Seal - 12 144 09-S
Gasket-Carburetor - 12 041 01-S
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers, Socket set, Nutdriver, Small torx driver to remove butterfly from throttle shaft
25+ year old Troy Bilt lawn tractor with Kohler engine. Throttle shaft seal worn off, linkage tab broken off, & throttle shaft was so worn that it was surrounded with brass dust. It would no longer
1. Removed air cleaner.
2. Removed air cleaner box from the carb.
3. Removed choke & throttle linkages from choke & throttle
4. Removed carb body. This took a little tugging, twisting because the gasket was stuck to both the carb body & intake port. Scraped old gasket of both surfaces.
5. Removed butterfly from throttle shaft.
6. Replaced throttle shaft & seal; reinstalled butterfly on shaft.
7. Installed new gasket. I like to use a thin film of grease on gaskets but maybe that's just me.
8. Repeated steps 4-3-2-1 using "replace" instead of "removed".

I thought my chances of getting replacement parts for an engine this old were about zero. Thanks to eReplacementParts, this old Kohler is running like a top! (It helps, too, that it's a Kohler.)
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4.8
Average Rating (out of 5):
5 Reviews
Click to filter by ratings:
5 stars
4
4 stars
1
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Great fit
    Fit great and in good shape
    Guest - April 8, 2020 Verified Purchase
    worked great
    as yu state here
    Guest - February 16, 2020 Verified Purchase
    Worked as expected
    worked great
    Guest - September 21, 2019 Verified Purchase
    Great!
    Fit lik ed a glove, worked like a charm!
    Guest - April 22, 2019 Verified Purchase
    Parts
    I was very satisfied!!!
    Guest - May 26, 2020 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Kohler, MTD, Toro, Cub Cadet
    Product Number: 12 041 01-S
    Classification: Part
    Weight: 0.02 lbs.
    Shipping: Ships Worldwide

    Fixing things makes sense...

    ...And we make it easy! With our Fix app, you always have a personalized repair guide on-hand. Easily find manuals and replacement parts on your phone while you’re DIYing in the garage or garden.

    "Love the flexibility of the app to add everything in the home and garage. Access to manuals and parts right there makes it convenient."

    Available on the App Store Get it on Google Play
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal