Easy
15-30 minutes
Genuine Makita replacement part, this item is sold individually.
This part is used on the tools listed below, to contain all of the part that are attached to the front end of the tool.
Such as the Chuck assemblies on the the Impact Drivers and the Spindle Assemblies on the Screwdrivers.
Ring Spring 11 231951-8
OEM part for: Makita
Part Number: 231951-8
$5.19
In Stock
Ships within 1 business day 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Ring Spring 11 will fit the following 250 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Makita
Show More Compatible ModelsThis item works with the following types of products:
- Impact Driver Parts
- Screwdriver Parts
- Cordless Drill Parts
- Drill Parts
- Hammer Drill Parts
- Engine Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
5
4 stars
0
3 stars
0
2 stars
1
1 stars
0
< PREV
- 1
perfect fit
saved lots of cash w/ diy and correct parts. OEM all the way!
iGlobal -
February 9, 2022
Verified Purchase
Best Place to Find and Buy Parts
I purchased a “ring spring” for my Makita impact/drill driver. I like that you can use a parts illustrator and purchase the parts so handily from the same site. I have had no problems with eReplacement.
James -
December 15, 2020
Verified Purchase
Excelente service .
Fast delivery, exactly what I need it.
Guest -
September 25, 2020
Verified Purchase
Here’s a place that you can find what anybody needs. And at a great price. Tuanks
Perfect fit
Guest -
October 7, 2019
Verified Purchase
Great place to find replacement parts at a good price
I found the parts I needed for my trimmer. Got them in a short time. And I will be shopping here again. Thanks
Guest -
May 29, 2019
Verified Purchase
First experience with eReplacementsParts
Web site and and ordering went well. On 12/23/23 I placed an order for: 1 pc Ring Spring ($4.99)and 2 pcs Steel balls ($3.99 x 2 = $7.98) for my Makita impact drill. Rec'd the Ring Spring a few days later. To date 1/5/24 I have not rec'd the steel balls (status "order delayed". Total cost of parts was $12.97 and shipping for 3 pcs, that together weigh less that an envelope, was $10.99. I will probably not be using you as a parts provider again. Thank you
Guest -
January 5, 2024
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Ring Spring 11
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The hammer case was broken and the hammer case complete had scratches and dents the ring spring was missed place and the bit sleeve was wobbly
Abdullah - May 10, 2022
Tool Type
Impact Driver
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Vise grips
I removed the bit sleeve with the washer, spring and the silver balls.
Loosened the hammer cover, removed the gear assembly, removed the anvil and before I decided to put everything together with the new parts I Re-greased the gears and the inside of the new hammer case complete. Than I went ahead and re assembled everything.
Loosened the hammer cover, removed the gear assembly, removed the anvil and before I decided to put everything together with the new parts I Re-greased the gears and the inside of the new hammer case complete. Than I went ahead and re assembled everything.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
bit stuck in anvil
DONALD - January 14, 2021
Tool Type
Impact Driver
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers
Parts Used
took apart and replaced anvil
followed video on ereplacement sight
followed video on ereplacement sight
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Anvil apparently worn out. The bit was stuck in the anvil and while I tried multiple times could not remove the bit
Michael - October 1, 2020
Tool Type
Impact Driver
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Adjustable Wrench
Parts Used
I followed the repair video by ereplacements.com to disassemble and reassemble the drill. I did have two difficulties: When removing the spring washer it shot out quickly and I never was able to find it so I had to purchase one of those also. Also my transmission was difficult to open but I eventually succeeded. The video was extremely helpful and I recommend it
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bit broke off in tool
TIMOTHY - July 28, 2020
Tool Type
Impact Driver
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver
Disassembled, replaced broken parts, reassembled
Did you find this story helpful?
Thanks for voting and helping fellow customers!
drill bit broken in drill chuck
Albert - April 25, 2020
Tool Type
Drill
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers
replaced the spring, steel balls and anvil being careful to not drop the bearings.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
end of driver broke inside chuck
robert - November 20, 2019
Tool Type
Impact Driver
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
like a DA took apart standing in shop, so i lost 1 ball an spring ring. used grease to hold balls in place,replaced other parts,used screwdriver to push spring ring into place.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Spring loaded chuck popped apart and we lost the steel balls
Randy - March 17, 2019
Tool Type
Impact Driver
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Replaced the steel balls
Installed chuck knob
Installed spring
Installed flat washer
Installed spring clip
Installed chuck knob
Installed spring
Installed flat washer
Installed spring clip
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bit no longer stayed in the impact gun
Scott - September 10, 2018
Tool Type
Impact Driver
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Dental pics
Installed the steel ball x2
Installed original sleeve
Installed spring in sleeve
Installed flat washer on top of washer
Installed ring spring on to hold everything in place
Easy. Only tools needed were for disassembly after I installed the sleeve on backwards the first time.
Installed original sleeve
Installed spring in sleeve
Installed flat washer on top of washer
Installed ring spring on to hold everything in place
Easy. Only tools needed were for disassembly after I installed the sleeve on backwards the first time.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Driver tip stuck in receiver
Stephen - March 4, 2017
👍 1 of 2 people found this instruction helpful
Tool Type
Impact Driver
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Removed the spring retainer clip. Remove the stuck driver tip. Lost the spring retainer clip. order a new one with other parts that I may lose in this repair process. Put the tip back together with new part.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Spring-release bit collet (if that terminology is correct) came apart during use due to wear of retaining washer and circlip. Allowed bit to fall out.
Andrew - January 21, 2017
Tool Type
Impact Driver
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Removed old, worn circlip and sleeve (spring and washer had already ejected themselves), then reinstalled new parts. Took no more than 5 minutes. Working like new again.
Thank you, Ereplacement Parts. With the occasional repair, my trusty Makita 6935FD continues to perform at a professional level day after day, year after year.
Andrew S.
Thank you, Ereplacement Parts. With the occasional repair, my trusty Makita 6935FD continues to perform at a professional level day after day, year after year.
Andrew S.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
