eReplacementParts.com
877-346-4814
Makita Parts
Repair Parts Home  Power Tool Parts  Makita Parts  267085-1 Flat Washer

Flat Washer

Part Number: 267085-1
Makita
Availability: 20 in stock
Price: $2.99
Order within the next 47 minutes
and your part ships today!
Product Information
Manufacturer: Makita
Product Number: 267085-1
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Description:
This is a Genuine OEM Sourced replacement part designed for Makita Impact Drivers. This part is made out of Metal and it is Sold Individually. This Washer helps to provide seal for the Sleeve.

When replacing this part you would need a Screwdriver and Pliers.
Compatibility

This part is compatible with the following machines:

Makita
Expand the 50 compatible machines
Products Compatibility

This item works with the following types of products:

  • • Cordless Drill
  • • Drill
  • • Engine
  • • Hammer Drill
  • • Impact Driver
  • • Screwdriver
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Impact Driver
Parts Used:
Ring Spring 11 - 231951-8
Flat Washer - 267085-1
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers, Utility knife with roofing blade
Bits falling out of impact head
Grab ring spring with hook of blade and pull out
Take sleeve off and spring install ball bearing
Put spring nose cover and flat washer back on
Use needle nose pliers to spread ring spring and push back in with flat head screw driver estimated repair time 3 min
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Impact Driver
Parts Used:
Ring Spring 11 - 231951-8
Flat Washer - 267085-1
Compression Spring - 233005-7
Steel Ball - 216001-0
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Spring loaded chuck popped apart and we lost the steel balls
Replaced the steel balls
Installed chuck knob
Installed spring
Installed flat washer
Installed spring clip
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Impact Driver
Parts Used:
Ring Spring 11 - 231951-8
Flat Washer - 267085-1
Compression Spring - 233005-7
Steel Ball - 216001-0
Bumper - 424362-6
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Dental pics
Bit no longer stayed in the impact gun
Installed the steel ball x2
Installed original sleeve
Installed spring in sleeve
Installed flat washer on top of washer
Installed ring spring on to hold everything in place
Easy. Only tools needed were for disassembly after I installed the sleeve on backwards the first time.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Impact Driver
Parts Used:
Ring Spring 11 - 231951-8
Flat Washer - 267085-1
Compression Spring - 233005-7
Nylon Washer 14 - 261108-7
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Driver tip stuck in receiver
Removed the spring retainer clip. Remove the stuck driver tip. Lost the spring retainer clip. order a new one with other parts that I may lose in this repair process. Put the tip back together with new part.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Impact Driver
Parts Used:
Ring Spring 11 - 231951-8
Flat Washer - 267085-1
Compression Spring - 233005-7
Sleeve - 324420-7
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Spring-release bit collet (if that terminology is correct) came apart during use due to wear of retaining washer and circlip. Allowed bit to fall out.
Removed old, worn circlip and sleeve (spring and washer had already ejected themselves), then reinstalled new parts. Took no more than 5 minutes. Working like new again.
Thank you, Ereplacement Parts. With the occasional repair, my trusty Makita 6935FD continues to perform at a professional level day after day, year after year.

Andrew S.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Impact Driver
Parts Used:
Ring Spring 11 - 231951-8
Flat Washer - 267085-1
Compression Spring - 233005-7
Nylon Washer 14 - 261108-7
Steel Ball - 216001-0
Sleeve - 324878-0
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Bit would not release
After taking it apart I just put it back together using the exploded diagram.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Cordless Drill
Parts Used:
Ring Spring 11 - 231951-8
Flat Washer - 267085-1
Compression Spring - 233005-7
Steel Ball - 216001-0
Repair Difficulty:
Medium
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pick
I had to replace the two chuck balls
I located your you tube video on how to do this repair. Thanks, it made it easy. I thought I would make a copy of the link for others.

https://www.youtube.com/watch?v=5CjbqaxVDoI

Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Impact Driver
Parts Used:
Ring Spring 11 - 231951-8
Flat Washer - 267085-1
Compression Spring - 233005-7
Sleeve - 324420-7
Steel Ball - 216001-0
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, very small screwdriver to snap ring spring in place
Ring spring came off allowing ball bearings to fall out and flat washer to get lost.
Put the ball bearings in place then put the sleeve and spring on and put the flat washer in place, you will need a very small screwdriver to snap the ring spring into place while compressing the flat washer down with a thumb or finger.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
Manufacturer: Makita
Product Number: 267085-1
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Related Products
eReplacementParts.com
7036 South High Tech Dr.
Midvale, UT 84047
visa mastercard discover american express PayPal