Easy
Less than 15 minutes
This is a Genuine OEM replacement part used on Makita drills and drivers. This is a metal spring and it is sold individually. Over time springs may lose its tension and may not function as intended. If this part is lost or damaged it must be replaced.
To replace this spring a pair of pliers is needed.
Compression Spring 233005-7
OEM part for: Makita
Part Number: 233005-7
$5.19
In Stock
Order within the next 36 minutes and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Compression Spring will fit the following 306 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 20 of 306 matching models.
Makita
Show More Compatible Models306 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Makita
This item works with the following types of products:
- Cordless Drill
- Drill
- Engine
- Hammer Drill
- Impact Driver
- Screwdriver
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Compression Spring
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Spring loaded chuck popped apart and we lost the steel balls
Randy - March 17, 2019
👍 1 of 1 people found this instruction helpful
Tool Type
Impact Driver
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Replaced the steel balls
Installed chuck knob
Installed spring
Installed flat washer
Installed spring clip
Installed chuck knob
Installed spring
Installed flat washer
Installed spring clip
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bit no longer stayed in the impact gun
Scott - September 10, 2018
Tool Type
Impact Driver
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Dental pics
Installed the steel ball x2
Installed original sleeve
Installed spring in sleeve
Installed flat washer on top of washer
Installed ring spring on to hold everything in place
Easy. Only tools needed were for disassembly after I installed the sleeve on backwards the first time.
Installed original sleeve
Installed spring in sleeve
Installed flat washer on top of washer
Installed ring spring on to hold everything in place
Easy. Only tools needed were for disassembly after I installed the sleeve on backwards the first time.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Driver tip stuck in receiver
Stephen - March 4, 2017
Tool Type
Impact Driver
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Removed the spring retainer clip. Remove the stuck driver tip. Lost the spring retainer clip. order a new one with other parts that I may lose in this repair process. Put the tip back together with new part.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Spring-release bit collet (if that terminology is correct) came apart during use due to wear of retaining washer and circlip. Allowed bit to fall out.
Andrew - January 21, 2017
Tool Type
Impact Driver
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Removed old, worn circlip and sleeve (spring and washer had already ejected themselves), then reinstalled new parts. Took no more than 5 minutes. Working like new again.
Thank you, Ereplacement Parts. With the occasional repair, my trusty Makita 6935FD continues to perform at a professional level day after day, year after year.
Andrew S.
Thank you, Ereplacement Parts. With the occasional repair, my trusty Makita 6935FD continues to perform at a professional level day after day, year after year.
Andrew S.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bit would not release
Daniel - June 16, 2016
Tool Type
Impact Driver
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
After taking it apart I just put it back together using the exploded diagram.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
I had to replace the two chuck balls
Carey - May 25, 2016
Tool Type
Cordless Drill
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Screwdriver, Pick
I located your you tube video on how to do this repair. Thanks, it made it easy. I thought I would make a copy of the link for others.
https://www.youtube.com/watch?v=5CjbqaxVDoI
https://www.youtube.com/watch?v=5CjbqaxVDoI
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Ring spring came off allowing ball bearings to fall out and flat washer to get lost.
Lyle - April 26, 2016
Tool Type
Impact Driver
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, very small screwdriver to snap ring spring in place
Put the ball bearings in place then put the sleeve and spring on and put the flat washer in place, you will need a very small screwdriver to snap the ring spring into place while compressing the flat washer down with a thumb or finger.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Old socket extension stuck in impact driver..
maurice - February 12, 2016
Tool Type
Impact Driver
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, hacksaw
I used replacement parts on you tube to see how it was done to basically change out the anvil.
I then went to e-replacement parts.com to find the parts I would need.
Parts came in a good timely manner.. I hack sawed the socket off, unscrewed the impact driver casings, replaced parts, and put it back together. I did use the e-replacement diagrams while doing this ,just to make sure I had it right..
I would use and recommend e-replacement parts to everyone in a heart beat, after all replacing something is much cheaper than buying a new one..
Thank you...
I then went to e-replacement parts.com to find the parts I would need.
Parts came in a good timely manner.. I hack sawed the socket off, unscrewed the impact driver casings, replaced parts, and put it back together. I did use the e-replacement diagrams while doing this ,just to make sure I had it right..
I would use and recommend e-replacement parts to everyone in a heart beat, after all replacing something is much cheaper than buying a new one..
Thank you...
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
