This is a genuine Makita replacement part, it is sold individually.
It is part of the bit holder. Without this Ball the bit would not stay in the holder. It is used in a number of different tools for different reasons. But it is most popular in Cordless Impact Drivers and Corded Screw Drivers.
Compatible with the tools listed below.
The diameter is 3.5mm.
Steel Ball 216001-0
OEM part for: Makita
Part Number: 216001-0


Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Steel Ball will fit the following 699 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 20 of 699 matching models.
Makita
Show More Compatible Models699 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Makita
This item works with the following types of products:
- Chain Saw
- Cordless Drill
- Drill
- Electric Drill
- Engine
- Hammer Drill
- Impact Driver
- Impact Wrench
- Miter Saw
- Nailer
- Plate Joiner
- Saw
- Screwdriver
- Shear
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.

Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Steel Ball
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Impact main spring had broken.
Tool Type
Impact Driver
Difficulty
Medium
Time
15-30 minutes
Tools Used
, Small three jaw puller, grease & foam swab to put grease on.
Compression spring on top of the flat washer ,Then I proceeded to put main shaft with the cup washer on it through the compression spring.I used the three jar puller to compress the spring in the assembly so shaft would push out through the hammer allowing me to put the two larger ball bearings in the two groves in the shaft. Once they were in place I released the pressure on the hammer spring and the assembly was now ready to it back in drill, be sure to apply a small amount of grease on the assembly before putting it back in the drill. Put the assembly back on the drill ,put the four screws back in tighten them down and you're done. I was very pleased with all the parts I received .Note : I downloaded the parts assembly of the hammer drill to make sure of the order which the parts went back in.
Bit would not release
Tool Type
Impact Driver
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Ring spring came off allowing ball bearings to fall out and flat washer to get lost.
Tool Type
Impact Driver
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, very small screwdriver to snap ring spring in place
Old socket extension stuck in impact driver..
Tool Type
Impact Driver
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, hacksaw
I then went to e-replacement parts.com to find the parts I would need.
Parts came in a good timely manner.. I hack sawed the socket off, unscrewed the impact driver casings, replaced parts, and put it back together. I did use the e-replacement diagrams while doing this ,just to make sure I had it right..
I would use and recommend e-replacement parts to everyone in a heart beat, after all replacing something is much cheaper than buying a new one..
Thank you...
Bit broke off in tool
Tool Type
Impact Driver
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver
drill bit broken in drill chuck
Tool Type
Drill
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers
end of driver broke inside chuck
Tool Type
Impact Driver
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Spring loaded chuck popped apart and we lost the steel balls
Tool Type
Impact Driver
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Installed chuck knob
Installed spring
Installed flat washer
Installed spring clip
Drill bit stuck and broke off in the chuck
Tool Type
Impact Driver
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
2. I took the front part of the driver apart and identified the parts I would need for the repair.
3. I ordered the parts. They arrived within 3 days.
4. I installed the parts following the parts detail provided by the website.
5. The sleeve only goes on one way to allow the flat washer to seat below the ring spring. If you are not careful the ring spring can fly off under tension as you take it off and put it back on.
6. The rest was easy. Works great and for $15 including shipping I saved a $100 replacement cost or repair bill.
Bit got stuck and when I went to try and release it the bearing balls popped out. Nowhere to be found
Tool Type
Impact Driver
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Tools- Flathead screw driver and pointed screw driver
Be very careful to not lose the spring nor the rings!!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.