Easy
15-30 minutes
This is a genuine OEM replacement part, it is sold individually.
This clip is used in various areas of the over 150 outdoor product models shown below.
It is most commonly used to clamp hoses or tubes in place.
Fuel Line Clip V490001230
OEM part for: Echo, Shindaiwa
Part Number: V490001230
$4.99
In Stock
Order within the next 10 hours and your part ships today! 
Jump To:
Product Description ?
- Dimension: 6.5
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Fuel Line Clip will fit the following 1156 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Shindaiwa
Echo
Show More Compatible ModelsThis item works with the following types of products:
- Blower Parts
- Chain Saw Parts
- Saw Parts
- Edger Parts
- Grass Trimmer Parts
- Trimmer Parts
- Drill Parts
- Pruner Parts
- Vacuum Parts
- Hedge Trimmer Parts
This part replaces obsolete part #: 132013-26630, 13201326630
Repair Videos ?
Watch the Repair Video for
Fuel Line Clip
Articles:
|
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
|
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
5
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Easy Repair
Ordered a complete list of fuel line replacement parts. Individual package identification matched the exploded diagram and help get the right part in the correct order, in the proper location. Really help the reassembly.
Guest -
February 21, 2020
Verified Purchase
Made repot easy
It was just like factory.
Martha -
February 20, 2020
Verified Purchase
great parts, they worked as expected
perfect fit for my echo blower ,,,, works great
Guest -
January 23, 2020
Verified Purchase
Easy to install
Great fit
Harry -
November 18, 2019
Verified Purchase
Replacement part
Exactly as advertised...received all I ordered! I can now charge both of my ring batteries at the same time when needed!!
Guest -
May 29, 2019
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Fuel Line Clip
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Fuel line and grommet were leaking
steven - January 16, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Chain Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Removed air filter and carburetor. Pryed out grommet with screwdriver and removed filter and line. Placed filter and clip on line and sprayed the other end with silicone spray and pushed through grommet. Placed filter and line through tank and pushed grommet in. Installed carburetor and air filter.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Fuel lines had decayed (old) and insufficient fuel was delivered.
Allan - December 7, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Blower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Socket set, Nutdriver
Removed the fuel tank and installed new lines and filter through grommet. Removed carburetor, cleaned and re-installed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Fuel lines were 22 years old and needed to be replaced.
Marc - May 6, 2024
Tool Type
Blower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Wire shepherd\\\'s hook
Dumped all fuel into a gas can. Used a wire shepherd's hook that I made from a hangar, and used it to pull the fuel pipe to the tank opening and popped it out of the tank. Then, removed the grommet using a wide blade screwdriver to get it started out of its seat. Once there, I removed the fuel pipe, fuel line & return, and pulled the brass lines from the old grommet.
Reassembly with new components is simply the same in reverse order. Once completed, install new fuel filter and use the shepherd's hook to move the fuel pipe/filter to its original position in the tank.
Reassembly with new components is simply the same in reverse order. Once completed, install new fuel filter and use the shepherd's hook to move the fuel pipe/filter to its original position in the tank.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broken fuel line
Tom - November 5, 2020
Tool Type
Blower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Allen wrench
Removed carburetor and rerouted fuel line
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Blower would not start & fuel line was broken
Guy - June 4, 2018
Tool Type
Blower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Socket set
Repaced these specific parts according to the directions in the product manual. Once complete the blower started up after a few pulls.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Chain saw would not idle
Richard - September 19, 2016
Tool Type
Chain Saw
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Allen wrench (hex key)
1. Removed air filter
2. Removed top saw plastic case cover
3. Took phone photos of the carburetor, fuel, and vent lines, and throttle and choke linkage.
4. Loosened control backing plate
5. Unscrewed carburetor
6. Detached fuel and vent lines, grommets and control linkages
7. Plucked fuel filter from tank using a hooked shaped wire
8. Reattached fuel, vent lines, grommets and linkages to new carburetor while cleaning dirt and sawdust along the way
9. Reattached carburetor and put on new air filter and spark plug
2. Removed top saw plastic case cover
3. Took phone photos of the carburetor, fuel, and vent lines, and throttle and choke linkage.
4. Loosened control backing plate
5. Unscrewed carburetor
6. Detached fuel and vent lines, grommets and control linkages
7. Plucked fuel filter from tank using a hooked shaped wire
8. Reattached fuel, vent lines, grommets and linkages to new carburetor while cleaning dirt and sawdust along the way
9. Reattached carburetor and put on new air filter and spark plug
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Echo chainsaw would lose power and quit!
Lynda - November 30, 2015
Tool Type
Chain Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Removed the tank grommet then pulled out the old filter, replace the filter on the fuel tube with the clip. And the inserted the new filter back in. The old fuel filter looked fine but the saw just would not run. I decided this might be a cheap fix if it worked. The saw ran great after replacement of the fuel filter. I removed thew air filter cover and replaced the air filter, then reinstalled the air filter cover.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Needed Carb
Gerald - November 17, 2015
Tool Type
Blower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers, allen wrenches
Remove Bad Carb. And Replace With The New One. Also The Fuel Filter And Air Filter Do The Same. No Problems.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
