eReplacementParts.com
877-346-4814
Echo Parts

Pipe-fuel 13201008260

OEM part for: Echo

Part Number: 13201008260


Install
Videos!
Pipe-fuel - 13201008260:Echo 360 View
Pipe-fuel - 13201008260:EchoPipe-fuel - 13201008260:EchoPipe-fuel - 13201008260:Echo 360 View
In Stock
Order within the next 13 hours and your part ships today!
Easy 30-60 minutes (5 rated repairs)?
OEM: Original Equipment Manufacturer ?
Echo
Does this fit my product?

Product Description ?

This replacement fuel pipe is specially made for Echo backpack blowers. It is a genuine OEM sourced item, not an aftermarket imitation. The purpose of this fuel line is to deliver fuel from the tank to the carburetor. Over time the fuel lines will deteriorate and become brittle requiring replacement. It is made from flexible plastic and it is sold individually.

  • Classification: Part
  • Weight: 0.05 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This Pipe-fuel will fit the following 76 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.

Echo

Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Blower Parts

Customer Part Reviews ?

5
Average Rating (out of 5):
1 Review
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Worked great
    Arrived in fine
    Guest - July 20, 2021 Verified Purchase

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Pipe-fuel


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 30-60 minutes (5 rated repairs)?

    Fuel lines had decayed (old) and insufficient fuel was delivered.

    Allan - December 7, 2016
    👍 2 of 2 people found this instruction helpful
    Tool Type

    Blower

    Difficulty

    Easy

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Socket set, Nutdriver

    Removed the fuel tank and installed new lines and filter through grommet. Removed carburetor, cleaned and re-installed.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Fuel lines were 22 years old and needed to be replaced.

    Marc - May 6, 2024
    Tool Type

    Blower

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Pliers, Socket set, Wire shepherd\\\'s hook

    Dumped all fuel into a gas can. Used a wire shepherd's hook that I made from a hangar, and used it to pull the fuel pipe to the tank opening and popped it out of the tank. Then, removed the grommet using a wide blade screwdriver to get it started out of its seat. Once there, I removed the fuel pipe, fuel line & return, and pulled the brass lines from the old grommet.

    Reassembly with new components is simply the same in reverse order. Once completed, install new fuel filter and use the shepherd's hook to move the fuel pipe/filter to its original position in the tank.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Broken fuel line

    Tom - November 5, 2020
    Removed carburetor and rerouted fuel line
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Backpack blower retainer cushions all broke and straps old and torn fuel lines old and brittle ignition switch on off button missing.

    Jeremy - January 2, 2020
    1. First I disassembled the ignition switch, the only tool needed was a screwdriver to remove the screws in handle once screws are out separated the handle which opens up down the middle into 2 pieces.
    2. Removed switch and all wires from handle and plastic protective tubing that runs to the back of blower.
    3. Installed new switch and wiring in reverse fashion, fairly easy, the hardest part was running wires back in protective plastic tubing because you don't want excessive wires in the handle you want just the right amount of wiring needed in handle that way wires don't get pinched.
    1. Next I replaced the 3 retainer cushions that hold the blower onto the backpack. Removed all broken cushions with screw driver on blower and screwdriver and nutdriver for the backpack portion.
    2. Screwed new cushions onto blower portion, then put blower new cushion threads through backpack mounting holes, used nutdriver to thread nuts onto backpack. Very easy repair.
    1.Next I replaced backpack straps screwdriver and nutdriver were the only tools I needed removed old straps and replaced with new ones in reverse fashion, very easy
    1. Next I replaced both fuel line running from carb to fuel tank using a screwdriver had to loosen the carb up to gain access to install new lines, old fuel lines just pull right off if they are a little sticky, a flathead screwdriver or plyers should help remove them, new fuel lines just press right on to carb and fuel tank.
    2. There also is a plastic protective twine around fuel lines just untwine from old lines and rewind around new lines. Fairly easy
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Blower would bog at higher RPM's.

    Tom - April 4, 2019
    Tool Type

    Blower

    Difficulty

    Easy

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Wrench Set, Allen wrench, scraper, utility knife & side cutters.

    Removed old carburetor, fuel lines, gaskets, filter and spark plug, replaced with new. Set carb high & low jets, started, fine tuned. Blower runs great!
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal