Spark Plug

Fuel Filter - A369000460

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set

Fuel filter dirty and spark plug needed to be changed

Easy to follow instructions on the Video you supplied on your website. It was hard to start and loss of power solved. Replaced the spark plug and gapped it at .026

Did you find this story helpful?

Thanks for voting and helping fellow customers!

3 of 4 people found this instruction helpful

Tool Type:

Blower

Parts Used:

Fuel Tank Vent - A356000031

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set

Would idle but would not increase speed

Made a hook out of a wire, then fished the fuel line from the tank and removed the old fuel filter and installed the new one, then placed it in the fuel tank. Removed the old fuel tank vent and replaced it with a new one on. Removed the air filter cover, then the old filter and replaced it with the new one. Removed the old spark plug and gapped the new one at 0.025 and installed it.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 2 people found this instruction helpful

Tool Type:

Blower

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Socket set

Blower Needed a Tune UP

1. Replaced the fuel and air filters followed by replacing the spark plug. Accomplished in minutes.
2. Remembered to empty the fuel prior to replacing the fuel filter. Made a hook at the end of a coat hanger cut straight, fished the fuel filter out and exchanged it with the new one.
3. Painless and very easy to do.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 3 people found this instruction helpful

Tool Type:

Blower

Parts Used:

Carburetor Repair Kit - P005002280

Air Filter - 13031051830

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver

Fuel leak, hard to start (floods)

Remove the carburetor from the blower engine, disassemble it installed carb kit.
Remove the old spark plug and install the new spark plug.
Remove the air filter cover and install the new filter

Did you find this story helpful?

Thanks for voting and helping fellow customers!

3 of 5 people found this instruction helpful

Tool Type:

Hedge Trimmer

Parts Used:

Fuel System Kit - 90135Y

Fuel Grommet - 13211546730

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Pliers, Adjustable Wrench

Leaked fuel

1. Remove old fuel system assembly and disconnected the fuel lines
2. Inserted the grommet with filter and fuel lines, then hooked up the fuel lines
3. Removed the air filter cover and installed the new filter then put the cover back on
4. Removed the spark plug and gapped the new on at 0.025 and installed it

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Trimmer

Parts Used:

Vent Tube - V471001201

Air Purge Body Assembly - P005000930

Gasket And Diaphragm Kit - P005000550

Fuel Line - V471001191

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver

Would not start

Took carburetor apart, cleaned, assembled new parts and started right up//// had considered buying a new weed eater but realized how easy it was to rebuild the old one and saved a lot of money. Also you can you tube it to see exactly how to repair it and what to look for. I have ordered from replacement parts and always got my order quickly and correct. Thanks, David

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blower

Parts Used:

Fuel Line Clip - V490001230

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set, Wire hook

Blower/vac would start and immediately cut out.

Watched the video on tune-up and followed the instructions. Very easy and helpful. Saved a
lot of money. .Awesome straight-forward video let me know I could tackle
this myself. Just need right socket wrench for the spark plug. Thank you for making this
easy.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blower

Parts Used:

Fuel Pipe - V471000771

Air Filter - A226000032

Fuel Filter - A369000460

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers, Socket set

Blower would not start & fuel line was broken

Repaced these specific parts according to the directions in the product manual. Once complete the blower started up after a few pulls.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blower

Parts Used:

Diaphragm/Gasket Kit - 12530308360

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Socket set

Back pack blower would not start.

Checked compression- good.
Checked spark - good.
Removed carburetor.
Ordered diaphragm kit on e-replacement.
Order arrived in a few days.
Installed new diaphragm and gaskets in carburetor.
Only required a screwdriver.
Reinstalled carburetor.
Started and ran great.
Empty fuel before removing carburetor.
Take pictures so you can reassemble correctly.
Easy!

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Chain Saw

Parts Used: