Easy
15-30 minutes
This is an authentic replacement part generally used on a variety of lawn and garden equipment. It is sourced from original equipment manufacturer and it is sold individually. This nut is a standard hardware which has multiple uses based on equipment. Please refer to appropriate diagrams for correct use/application of it. Please note you would need a wrench when working with this left hand threaded nut.
Nut-hex Ins 712-0429
OEM part for: MTD, Ryobi, Yard Machines, Troy-Bilt, Bolens, Yard Man, Craftsman, Cub Cadet, Husky
Part Number: 712-0429
$4.10
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Nut-hex Ins will fit the following 13859 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Ryobi
MTD
Yard Machines
Troy-Bilt
Bolens
Yard Man
Craftsman
Cub Cadet
Husky
Show More Compatible ModelsThis item works with the following types of products:
- Trimmer Parts
- Lawn Tractor Parts
- Snowblower Parts
- Cultivator Parts
- Edger Parts
- Chipper / Shredder Parts
- Lawn Mower Parts
This part replaces obsolete part #: 912-0429, 1000957, 60072, 912-0429 ((Code: N)), YS-712-0429, 00060072, AF-47810, 01000957, 1983038, 753-04200
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Nut-hex Ins
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Replacing Carburetor
Paul - August 26, 2022
Tool Type
Snowblower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Pliers, Socket set, Needle nosed vice grips
Parts Used
Removed shroud around carb, disconnected lines, used vice grips to hold fuel line closed. During the process of reassembling the carb to the stud, i tightened the acorn nut down one too many turns and sheared it right off. Be careful tightening them back on because the stud can break easily. So, I had to order a new stud and new nuts for the carburetor.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Shear blog snapped
Susan - December 28, 2019
Tool Type
Snowblower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers
Parts Used
Just replaced it
Did you find this story helpful?
Thanks for voting and helping fellow customers!
new parts replaced worn out parts due to friction... slide shoes and plate shave.
Ryan - May 14, 2019
Tool Type
Snowblower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Adjustable Wrench
unbolted old parts and rebolted new parts; very straight forward repair.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Consumable parts were worn out
Daniel - April 3, 2017
Tool Type
Snowblower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Socket set, Wrench Set
1. Removed 2 side shoes
2. Removed worn out shave plate
3. Installed new shave plate and bolts - tighten loosely
4. Install two side shoes - tighten loosely
5. Adjust height of side shoes
5. Tighten all carriage bolts with nylon lock nuts
Caution" Old shave plate may have a worn on sharper edge due to contact with side walk and or pavement. Suggest you use light gloves to mitigate cut hazard.
2. Removed worn out shave plate
3. Installed new shave plate and bolts - tighten loosely
4. Install two side shoes - tighten loosely
5. Adjust height of side shoes
5. Tighten all carriage bolts with nylon lock nuts
Caution" Old shave plate may have a worn on sharper edge due to contact with side walk and or pavement. Suggest you use light gloves to mitigate cut hazard.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
