Medium
30-60 minutes
It is an OEM item which is made for use with Freemotion, ProForm and NordicTrack exercise equipment. This washer provides a tight seal between the connected components. Over time the material will wear out and it may compress eventually requiring a replacement. Refer to the specific diagrams of your model for the correct installation of the new part. It is a high-quality washer which is made of a durable material and is sold as an individual item. You will need properly sized screwdriver remove and resecure the bolt that holds the washer.
Washer 014030
OEM part for: NordicTrack, ProForm, Freemotion, HealthRider, Golds Gym, Weslo
Part Number: 014030
$4.99
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Washer will fit the following 196 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
NordicTrack
ProForm
Freemotion
HealthRider
Golds Gym
Weslo
Show More Compatible ModelsThis item works with the following types of products:
- Elliptical Parts
- Exercise Bike Parts
- Treadmill Parts
This part replaces obsolete part #: 14172
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Exactly what I ordered and came quickly.
It was easy to find the part I needed and their prices were reasonable.
Guest -
March 7, 2023
Verified Purchase
Parts replacement
Easy ordering parts Fast service Would buy from again
Guest -
March 15, 2020
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Washer
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Bearings, bolts, spacers were missing or damaged
Carl - January 29, 2019
Tool Type
Elliptical
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Hex key
Replaced bearings and installed new washers, spacers and bolts according to parts list
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Gears wore out causing damage to the other parts.
Bill - January 24, 2018
Tool Type
Elliptical
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Wrench Set, Allen wrench
Parts Used
- M8 X 15mm Screw - 223089
- Washer - 014030
- M8 X 25mm Button Screw - 186409
- Large Axle Cover - 244070
- Crank Bushing - 244103
- Axle Cover - 244345
- Bushing Assembly - 244209
- Link Arm Spacer - 244344
- Outside Crank Bushing - 244067
- M10 Curved Washer - 224385
- M8 X 30mm Button Screw - 252018
- Pedal Arm Sleeve - 246373
- M6 Split Washer - 014018
I used an Allen wrench used to remove the covers the gears. I removed and replaced the old parts with the new and then put it back together.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bushings worn out
Bruce - November 18, 2017
Tool Type
Elliptical
Difficulty
Hard
Time
15-30 minutes
Tools Used
Screwdriver, Hammer, Clamps
1. Removed old bushings.
2. Inserted new bushings. Had to press and hammer into place. Bushings were a tight fit.
2. Inserted new bushings. Had to press and hammer into place. Bushings were a tight fit.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Pedal Arm Sleeve and Large Axle Cover were worn through
James - May 27, 2016
Tool Type
Elliptical
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Took off the old pedal arm sleeve, both crank bushings, the large axle cover, and the M8 washer by unscrewing the M8x30mm button screw with a screwdriver. I inspected all of the parts. The pedal arm sleeve and large axle cover were worn through (plastic shavings everywhere!), and it looked like the outside crank bushing was damaged. So, I replaced these 3 things, and the M8 washer, putting everything back on the crank. I tightened the button screw. Done! Everything seems to work fine. I am a little worried that there still seems to be quite a bit of plastic shavings being created by all of the rubbing/friction. Not sure if this is normal, but if it wears through again, at least I now know how to fix it.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
