866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST

Washer

Part Number: 014030
NordicTrackProFormFreemotion
Availability: 10 in stock
Price: $0.99
Quantity:
Order within the next 4 hours
and your part ships today!

*This part replaces obsolete part #: and 14172.

Specifications
  • M8
Description:
It is an OEM item which is made for use with Freemotion, ProForm and NordicTrack exercise equipment. This washer provides a tight seal between the connected components. Over time the material will wear out and it may compress eventually requiring a replacement. Refer to the specific diagrams of your model for the correct installation of the new part. It is a high-quality washer which is made of a durable material and is sold as an individual item. You will need properly sized screwdriver remove and resecure the bolt that holds the washer.
Product Information
Manufacturer: NordicTrack, ProForm, Freemotion
Product Number: 014030
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Compatibility

This part is compatible with the following machines:

NordicTrack
ProForm
Freemotion

Products Compatibility

This item works with the following types of products:

  • • Elliptical
  • • Exercise Bike
  • • Treadmill
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Elliptical
Parts Used:
M8 X 15Mm Screw - 223089
Washer - 014030
Axle Cover - 244345
Bushing Assembly - 244209
Link Arm Spacer - 244344
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Hex key
Bearings, bolts, spacers were missing or damaged
Replaced bearings and installed new washers, spacers and bolts according to parts list
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Gears wore out causing damage to the other parts.
I used an Allen wrench used to remove the covers the gears. I removed and replaced the old parts with the new and then put it back together.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Elliptical
Parts Used:
Washer - 014030
Axle Cover - 244345
Bushing Assembly - 244209
Link Arm Spacer - 244344
Repair Difficulty:
Hard
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Hammer, Clamps
Bushings worn out
1. Removed old bushings.
2. Inserted new bushings. Had to press and hammer into place. Bushings were a tight fit.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Elliptical
Parts Used:
Washer - 014030
Large Axle Cover - 244070
Outside Crank Bushing - 244067
Pedal Arm Sleeve - 246373
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Pedal Arm Sleeve and Large Axle Cover were worn through
Took off the old pedal arm sleeve, both crank bushings, the large axle cover, and the M8 washer by unscrewing the M8x30mm button screw with a screwdriver. I inspected all of the parts. The pedal arm sleeve and large axle cover were worn through (plastic shavings everywhere!), and it looked like the outside crank bushing was damaged. So, I replaced these 3 things, and the M8 washer, putting everything back on the crank. I tightened the button screw. Done! Everything seems to work fine. I am a little worried that there still seems to be quite a bit of plastic shavings being created by all of the rubbing/friction. Not sure if this is normal, but if it wears through again, at least I now know how to fix it.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Washer - ( 014030 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy