Please note shipping times may be longer than expected due to carrier delays.
eReplacementParts.com
877-346-4814
Black and Decker Parts
Preferred Partners of
photo thumbnailphoto thumbnail360 degree photo thumbnail

Spool Assembly

Part Number: 90564281
Black and Decker
Availability: 25+ in stock
Price: $9.76
Order within the next 10 hours
and your part ships today!
Product Information
Manufacturer: Black and Decker
Product Number: 90564281
Classification: Part
Weight: 0.09 lbs.
Shipping: Ships Worldwide
Description:
This is a genuine Black & Decker replacement part, sold individually.

This Replacement Spool eases the tedious work of hand-winding spools.

30-foot factory-wound replacement spool features a .065-inch diameter line utilizes centrifugal force to automatically feed the cutting string while eliminating bumps and hitches.

It is compatible with the Trimmers listed below.
Products Compatibility

This item works with the following types of products:

  • • Trimmer
Questions & Answers

The clips broke on the cap. I ordered a new one with yall. But on the spool. Does it just slide on the shaft. I don't see a lever on this model GH900.
Carlton for model number GH900 asked on 2019-08-10
Hi Carlton, the spool should just slide on the shaft, we actually have a video you can watch if you need further help. https://www.youtube.com/watch?time_continue=10&v=P3vwUiXPhe8. Thank you for your question and good luck with your repair!
I ordered the cap for my spool assembly. There is a little black lever #Q1 in the book and it does not work without it. I need one as mine is lost.
shirley for model number LST136 asked on 2019-07-20
Hello Shirley, Thanks for writing! It sounds like you need a, Lever Assembly- Part Number: 90567077. We do have these in stock! Our customer service department would be happy to help you order this. We hope this helps!
Repair Instructions: Submitted by Customers Like You
4 of 4 people found this instruction helpful
Tool Type:
Grass Trimmer
Parts Used:
Spool Assembly - 90564281
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Needed To Replace Spools
All you need to do is simply detach the line for the holder, run through hole on trimmer, and put spool in place. These are factory wound so I order three spools a season and replace the whole spool rather than re-string an existing spool. The factory wind works much better in terms of feeding and longevity. I recycle the old spools.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 3 people found this instruction helpful
Tool Type:
Grass Trimmer
Parts Used:
Spool Assembly - 90564281
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The cover broke, and the spool was chewed with wear
Everything snapped in place without problem. I'm a 72 year old woman who was shy about ordering the parts and trying to repair the weed eater myself, but the parts were easy to find on your website, and putting the parts together was a snap.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 4 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Spool Assembly - 90564281
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Couldn't find my spool for string
Replace it, so when I find my spool I will have extra
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Spool Assembly - 90564281
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Cover broke
Simply added the replacement spool and snapped the replacement cover on. Easy peasy!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Spool Assembly - 90564281
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Spool ran out.
Replaced spool. Simply took off the cover, removed old spool and secured the new one in place. Ran the line and reattached the cover. Trimmer runs great!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Spring - 90566944
Spool Assembly - 90564281
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, no tools needed
Spool cover worn, spring missing, replaced spool with new one
This repair was easy. Just remove and replace.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Grass Trimmer
Parts Used:
Spool Assembly - 90564281
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, none required
Trimmer spool broken
Remove spool cover
Add spool plastic wire
replace spool
replace cover
trim your lawn
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Grass Trimmer
Parts Used:
Spool Assembly - 90564281
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, none
spool broke
1.Removed outside cover.
2.Removed spool.
3.Replaced new spool.
4.Replaced outside cover.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Grass Trimmer
Parts Used:
Spring - 90566944
Lever - 90567079
Spool Assembly - 90564281
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
, My Hands
While weed eating hit a wire fence parts flew - lost the lever bump cover warped
Decided to replace the entire AFS and it now works like brand new!! Thank you!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Grass Trimmer
Parts Used:
Spool Assembly - 90564281
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Spool ran out of string
Removed old spool and replaced with new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4.3
Average Rating (out of 5):
6 Reviews
Click to filter by ratings:
5 stars
5
4 stars
0
3 stars
0
2 stars
0
1 stars
1
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • It cuts grass
    Fit my weed wacker perfectly. Arrived quickly.
    Guest - April 13, 2020 Verified Purchase
    worked as expected.
    The part is fine, but it took over a week for me to receive it. This was the fault of the postal service, since I kept getting emails as to when they received it and where it was located.
    Guest - November 26, 2019 Verified Purchase
    Easy repair
    Arrived quickly, fits perfectly.
    Minerva - November 21, 2019 Verified Purchase
    Worked as expected.
    The parts are just what ordered.
    Guest - July 24, 2019 Verified Purchase
    7 year old weed eater works like new again:O)
    Before I realized I could replace the line feeder and spool I nearly bought a new weed eater. For $10 my trusty 7 year old weed eater works like new again. Everything about this company and it's products was top notch! The customer service whom I placed the order with could not have been more helpful. As a 60 something women, to be able to diagnose & repair my weed eater and have it work was a HUGE satisfaction!!!!
    Guest - July 23, 2019 Verified Purchase
    Don't know, hence the one star.
    Just returned home from a hospital stay, therefore haven't used the parts yet. At this point I can't verify anything and it will probably be quite a while before I can even be sure the parts fit. I will say that the ordering experience was a good one, smooth with no problems. Thank you.
    Guest - May 9, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Black and Decker
    Product Number: 90564281
    Classification: Part
    Weight: 0.09 lbs.
    Shipping: Ships Worldwide
    Repair Guides
    Watch the Repair Video for Spool Assembly
    Articles:
    Step-by-step instructions for removing and installing the spool on your Black and Decker string trimmer....
    October 09, 2017

    Fixing things makes sense...

    ...And we make it easy! With our Fix app, you always have a personalized repair guide on-hand. Easily find manuals and replacement parts on your phone while you’re DIYing in the garage or garden.

    "Love the flexibility of the app to add everything in the home and garage. Access to manuals and parts right there makes it convenient."

    Available on the App Store Get it on Google Play
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal