This is an authentic part from Kohler for use in engines. The oil seal fits between the flat washer and the clip governor shaft. If this item becomes broken it will need to be replaced and may require a set of pliers during the installation. This is available as an individual replacement part and is made of plastic and rubber.
Seal, Oil 14 032 07-S
OEM part for: Kohler
Part Number: 14 032 07-S
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 513 machines
Kohler
This item works with the following types of products:
- Engine Parts
- Lawn Mower Parts
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Seal, Oil
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
vertical shaft on pressure washer leaking at bottom seal.
Tool Type
Engine
Difficulty
Medium
Time
30-60 minutes
Tools Used
Socket set, Wrench Set, adapt a tall socket to be used as a seal driver.
Parts Used
Leaking oil around the oil pan gasket.
Tool Type
Lawn Mower
Difficulty
Medium
Time
1-2 hours
Tools Used
Socket set, Pry bar, hammer, putty knife/scraper, block of wood
Oil pan gasket leaked
Tool Type
Engine
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Torque wrench, rubber mallet, hammer
2. Removed engine from lawn mower (with some help from YouTube).
3. Removed oil seal.
4. Unbolted and removed oil pan.
5. Found factory had installed wrong gasket, removed, and cleaned surfaces.
6. Installed new gasket. Fit perfectly.
7. Installed oil pan and torqued bolts (again with help from YouTube).
8. Installed oil seal.
9. Installed engine onto mower.
10. Refilled with oil and gasoline.
11. Started engine and checked for leaks. Found none.
Oil was leaking from the Oil Pan Gasket.
Tool Type
Lawn Mower
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Socket set, Nutdriver, Torque Wrench
2. I drained the Fuel from the gas tank.
3. I drained the remaining oil from the crankcase
4. I disconnected the cable from the engine
5. I removed the blade and the blade clutch (I used a wheel puller)
6. I removed the engine to bring it to a workspace.
7. I cleaned the shaft so that the pan could be pulled off past it.
8. Using an 8mm socket wrench I removed the 7 bolts holding the pan in place.
9. I pulled the pan off the bottom of the crankshaft.
10. I removed the old seal cleaned all of the mateing surfaces and installed a new gasket using gasket compound.
11. I hand tightened the pan bolts in a cross cross pattern and then torqued them to spec.
12. I oiled the new shaft seal and drove it into place.
13. I reinstalled the engine in the reverse order of removal.
14. I adjusted the cable for the drive belt and installed the new cable guide and training shield.
15. I put oil in the crankcase, fuel in the tank and tried to start the engine.
16. I pulled the starter rope 15 to 20 time and then remembered to put the spark plug cable back on .
17. I mowed my yard and parked the mower over paper towels. There were no leaks evident the next day.
Oil pan gasket was leaking and did some maintenance while it was down
Tool Type
Lawn Mower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Socket set, Wrench Set, Nutdriver, Impact driver
2. Remove the blade from the engine
3.Drain the oil from engine
4.Remove the oil pan and clean old gasket off
5.Change old oil seal out of pan
6.Put new gasket on pan and resemble it
7.Reinstall engine to mower deck
8.Install new blade
9.Install new air filter
10.Install new rope
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.