eReplacementParts.com
866-322-9842
Hitachi Parts
Repair Parts Home  Power Tool Parts  Hitachi Parts  322452 Safety Cover
Safety Cover

Safety Cover

Part Number: 322452
Hitachi
Availability: 25+ in stock
Price: $10.66
Quantity:
Order within the next 5 hours
and your part ships today!

*This part replaces obsolete part #: 321-367 and 321367.

Product Information
Manufacturer: Hitachi
Product Number: 322452
Classification: Part
Weight: 0.40 lbs.
Also Known As: Blade Shield, Blade Cover, Safety Guard, Blade Guard
Shipping: Ships Worldwide
Description:
This is a genuine Hitachi replacement part, it is sold individually.
This Safety Cover is the part if the Miter Saws shown below used to cover the blade. as you use the saw.
As you bring the head of the miter saw up, the Safety Cover will lower to cover the blade .
Compatibility

This part is compatible with the following machines:


Products Compatibility

This item works with the following types of products:

  • • Saw
Questions & Answers

I bought a clear safety cover for a c10fsb; do they make a clear cover for the c12fsb?
Byron for model number C12fsb
Hello Byron, Thank you for the question. Sadly, we do not have any information on the model number you provided. Could you please verify the number you provided us with? If it is correct, I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
Does a clear part exist?
Byron for model number C12RSH
Good Day Byron. Thank you for your question in regards to your unit (Model Number C12RSH). Based on our research the Safety Cover that is compatible with your unit is Part Number 324-375 (it has a yellow tint to it). Hope this helps. Best Regards.
Replaced the bearings and putting unit back together. Could someone tell me where on the safety guard return spring attaches to?
Larry for model number C10FS
Hi Larry, Thank you for your question. The return spring attaches to the lower guard and then to the inside of the gearcase housing. It would attach into a small hole located near the large circular opening on the cover. I hope this helps. Thank you and have a great day!
Repair Instructions: Submitted by Customers Like You
4 of 5 people found this instruction helpful
Tool Type:
Miter Saw
Parts Used:
Carbon Brush Set - 999-043
Link - 321-368
Safety Cover - 322452
Return Spring - 375131
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Nutdriver
Saw blade guard, worn brushes
It was an easy repair simple logic and when you remove the old guard pay attention to how it came off so it would be easy to put on again.

To install the new brushes, just remove the brush caps with a screw driver , then remove the old brushes, then install the new ones and screw brush caps back on.

Not much to it!

It is nice to find the parts easily, order them and get it up and running again quickly. Much cheaper than a new saw.


Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 4 people found this instruction helpful
Tool Type:
Miter Saw
Parts Used:
Safety Cover - 322452
Return Spring - 375131
Table Insert - 319-549
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Wrench Set, needle-nose pliers
The saws safety cover had a partial break so it would bind when trying to use the saw and would not retract. Another employee of my company misused the saw and somehow broke the plastic table inserts.
The table inserts were easy, four screws per side all easy to reach, no problem. I had to remove the saw blade and it's metal inserts, plus unscrew the metal plate that held the safety cover. I also had to bend the piece that lowers and retracts the safety cover back to it's original shape. After I had all that aligned and working it took some time to figure out where the return spring connected because it had ejected itself from the saw, probably when the employee bent the metal retractor and broke the safety cover. After I figured out the springs proper placement, installing it was very easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 3 people found this instruction helpful
Tool Type:
Miter Saw
Parts Used:
Safety Cover - 322452
Return Spring - 375131
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Socket set
Blade guard was broken and would not raise properly
Removed old guard and return spring. Replaced with new parts. Now it works like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chop Saw
Parts Used:
Carbon Brush Set - 999-043
Sub Fence (B) Assy - 321-385
Felt - 996-226
Safety Cover - 322452
Switch Handle (Left Side) - 321-382
Repair Difficulty:
Easy
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver
Handle for trigger button broke.
Changed the parts, simple.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Carbon Brush Set - 999-043
Guard (A) - 321-333
Safety Cover - 322452
Table Insert - 319-549
Handle (R) - 321-380
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Wire cutter and wire nuts
Broken housings
Remove all the screws from the broken housing and electrical connections from the housing, then replace the new housing and put back the electrical connections. Thank you eReplacementParts.com for the new replacement parts, very easy job!!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4
Average Rating (out of 5):
1 Reviews
Click to filter by ratings:
5 stars
0
4 stars
1
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • saw parts
    Everything fit correctly. I was kept updated on my order. Greatly appreciate it
    Guest - September 28, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Hitachi
    Product Number: 322452
    Classification: Part
    Weight: 0.40 lbs.
    Also Known As: Blade Shield, Blade Cover, Safety Guard, Blade Guard
    Shipping: Ships Worldwide
    Related Products
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal

    fancyboxy