eReplacementParts.com
877-346-4814
Metabo HPT (Hitachi) Parts

Dust Bag 322955M

OEM part for: Metabo HPT (Hitachi)

Part Number: 322955M


Install
Videos!
Dust Bag - 322955M:Metabo HPT (Hitachi) 360 View
Dust Bag - 322955M:Metabo HPT (Hitachi)Dust Bag - 322955M:Metabo HPT (Hitachi)Dust Bag - 322955M:Metabo HPT (Hitachi) 360 View
In Stock
Ships within 1 business day
Easy Less than 15 minutes (25 rated repairs)?
OEM: Original Equipment Manufacturer ?
Metabo HPT (Hitachi)
Does this d-block d-md-none fit my product?

Product Description ?

Genuine Hitachi replacement part, this item is sold individually.
The purpose of this Dust Bag is to collect the sawdust and other debris created by the tools listed below.
It is clamped to the machine by pressing on the two metal tabs at the open of the bag.
Then releasing the tabs it will clamp around housing or adaptor for the bag.

  • Classification: Accessory
  • Weight: 0.10 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 49 machines

Metabo HPT (Hitachi)

C10FCE2 10" Compound Miter Saw View Diagrams & Manuals
C10FCH2 10" Laser Compound Miter Saw View Diagrams & Manuals
C12FCH 12" Laser Compound Miter Saw View Diagrams & Manuals
C12FDH 12" Laser Dual Compound Miter Saw View Diagrams & Manuals
C12LCH 12" Compound Miter Saw View Diagrams & Manuals
C12LDH 12" Dual Compound Miter Saw View Diagrams & Manuals
C12LSH 12" Sliding Dual Compound Miter Saw View Diagrams & Manuals
C12RSH 12" Sliding Dual Compound Miter Saw View Diagrams & Manuals
C15FB 15 Miter Saw View Diagrams & Manuals
C8FB2 8-1/2" Twin Rail Sliding Compound Miter Saw View Diagrams & Manuals
C12LC 12" LCD Compound Miter Saw View Diagrams & Manuals
C12FSA 12" Sliding Dual Compound Miter Saw View Diagrams & Manuals
C10FCH 10" Laser Compound Miter Saw View Diagrams & Manuals
C10FCE 10" Compound Miter Saw View Diagrams & Manuals
C10FCB 10" Compound Miter Saw View Diagrams & Manuals
C10FS Slide Compound Saw View Diagrams & Manuals
C8FB Slide Compound Saw View Diagrams & Manuals
C10FA 10" Miter Saw View Diagrams & Manuals
C10FB 10" Miter Saw View Diagrams & Manuals
C12FA 12" Miter Saw View Diagrams & Manuals
C8FSE Slide Compound Saw View Diagrams & Manuals
C8FSHE Slide Compound Saw View Diagrams & Manuals
C10FSH Slide Compound Saw View Diagrams & Manuals
C10FSB Slide Compound Saw View Diagrams & Manuals
P18DSLQ4M 18v Cordless Li-Ion 3-1/4 Inch Planer (Bare Tool) View Diagrams & Manuals
P20STM 3-1/4 Inch Portable Planer View Diagrams & Manuals
C10FCGSM 10 Inch Single Bevel Miter Saw 15 Amp 5000 Rpm Motor W Carrying Handle View Diagrams & Manuals
C10FCH2SM 10 Inch Compound Miter Saw With Laser Marker View Diagrams & Manuals
C10FSBSM 10-Inch Sliding, Dual Compound Miter Saw 12 Amp 3800 Rpm 5/8 Inch Arbor W/O Laser View Diagrams & Manuals
C10FSHSM 10-Inch Sliding, Dual Compound Miter Saw With Laser Marker W/Laser 12 Amp 3800 Rpm 5/8 Incharbor View Diagrams & Manuals
C12FDHSM 12 Inch Dual Bevel Miter Saw With Laser Marker View Diagrams & Manuals
C12RSH2M 12 Inch Sliding Compound Miter Saw Wh Laser Marker,sliding Fences View Diagrams & Manuals
C8FSESM 8-1/2-Inch Sliding Compound Miter Saw View Diagrams & Manuals
C8FSHESM 8-1/2-Inch Sliding Compound Miter Saw With Laser And Light View Diagrams & Manuals
C12FCHE2 Hammer Drill View Diagrams & Manuals
C12LCE2 Hammer Drill View Diagrams & Manuals
C12LCHE2 Hammer Drill View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Miter Saw Parts
  • Saw Parts
  • Planer Parts

This part replaces obsolete part #: 373958, 322955, 322-955, 976478, 998-845

Customer Part Reviews ?

4.5
Average Rating (out of 5):
11 Reviews
Click to filter by ratings:
5 stars
8
4 stars
2
3 stars
0
2 stars
0
1 stars
1
  • Highest Rating
  • Most Recent
< PREV
  • 1
  • 2
NEXT >
  • ?
    I don’t know why you need a review for sending me a part that I paid for. Yea you guys a great! Hope that helps you.
    Guest - September 6, 2022 Verified Purchase
    It took awhile scrolling to find the part, but once I found it, ordering was easy and I received the correct item within a few days.
    I obtained a used miter saw, but with no user manual. I downloaded a manual and tried the saw. The saw blew sawdust all over the shop. Oh, there was a dust bag shown in the diagram in the user manual, duh! That would help! So I found one here, ordered it, swept up all the sawdust, and now everything's good.
    Guest - April 18, 2022 Verified Purchase
    No problems.
    No problems.
    Guest - June 25, 2020 Verified Purchase
    worked just right
    perfegt fit
    Guest - September 21, 2019 Verified Purchase
    Very good replacement part
    The dust bags have the same quality as the original and are a perfect fit
    Guest - September 20, 2019 Verified Purchase
    works great
    Received item. took a little time. will come back when i need something. thank for everything
    Guest - September 6, 2019 Verified Purchase
    Perfect replacement
    Fits good and nice price
    Guest - July 9, 2019 Verified Purchase
    Parts for saw are good quality
    Part fit saw as expected
    Jack - April 25, 2019 Verified Purchase
    easy repair.
    delivery was timely. good fit .
    Guest - January 29, 2023 Verified Purchase
    Good product. Thanks
    Good product, prompt service. Thanks
    Gene R - July 8, 2021 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Dust Bag


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy Less than 15 minutes (25 rated repairs)?

    Bag wore out and ripped, 15 years old

    Ralph - June 6, 2017
    👍 3 of 3 people found this instruction helpful
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Out with old and onto with new.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    The duct port, on my miter saw, had fallen off

    Robert - May 21, 2023
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Shipping was incredibly fast, lowest price on the Internet, the parts were exactly the right parts.
    I would absolutely use eReplacement parts.
    Every single time I need a part for any tool I have!
    I could not have been happier with them.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Holes in old bag

    Frank - December 14, 2019
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , No tools needed

    1. Removed old bag by squeezing spring clamp and removing from saw.
    2. Reversed above to install new bag.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Bad handle and bad dust bag

    Fred - May 8, 2018
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Adjustable Wrench

    Remove old dust bag install new bag,removed old handle install new works like new
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Try to turn saw on, sometimes it would start but run rough and spark

    john - February 10, 2016
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Remove the brush caps with a straight head screw driver, pull out old brushes, insert new brushes, depress spring and hold in place with end of the screw drive, at the same time put the cap on and turn. I also replaced the worn out dust bag.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Old dust bag tore

    Keith - August 21, 2023
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , nothing

    I just attached the new dustbag.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Sawdust collection bag was broken

    Thomas - June 8, 2021
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Nutdriver

    Removed old parts and installed the new ones. Easy, peasy
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    The old arbor bolt had its corners rounded off

    John - October 17, 2019
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Wrench Set

    Removed old bolt and replaced it with new bolt
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    dust bag replacement and bent side handle replacement

    michael - May 30, 2019
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    placed new dust and screwed tight. replaced old bent side handle
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    No power to the Miter Saw

    Richard - April 30, 2019
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    1. Clean the tool
    2. remove and replace the brushes, and switch parts
    3. Test and operate

    25 year old saw is now good as new.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal