Easy
15-30 minutes
This is an OEM part sourced directly from the manufacturer. It is sold individually.
A ring klip is a fastener that holds components or assemblies onto a shaft or in a housing/bore when installed in a groove. Once installed, the exposed portion acts as a shoulder which retains the specific component or assembly.
This part is compatible with the outdoor equipment that is shown below.
Ring Clip 812000029
OEM part for: Husqvarna, Poulan, Ryobi
Part Number: 812000029
$3.99
In Stock
Order within the next 2 hours and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Also Known As: Circlip Ring, E-Clip, U-Clip, C-Clip, Retaining Ring
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Ring Clip will fit the following 6838 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 20 of 6838 matching models.
6838 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Craftsman
- Husqvarna
- Jonsered
- Poulan
- Ryobi
- Weed Eater
This item works with the following types of products:
- Lawn Mower
- Lawn Tractor
- Trimmer
This part replaces obsolete part #: 12000029
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
25
4 stars
3
3 stars
0
2 stars
0
1 stars
1
< PREV
- 1
- 2
- 3
Fit as it should
The right part to fix the issue. Only issue was it took 4 days to go 25 miles from the warehouse to my house.
Gary -
April 14, 2024
Verified Purchase
Ring clip for front axle:
Part is as describe. Perfect fit! Thanks.
Guest -
May 23, 2023
Verified Purchase
Perfect Fit
Easy repair, part fit perfectly. Would buy from here again!
Guest -
May 23, 2023
Verified Purchase
My go to parts supplier that delivers !
As described.
Guest -
March 21, 2023
Verified Purchase
Small but important part
Loose this clip and the wheel comes off. Glad I could find it.
Guest -
November 2, 2022
Verified Purchase
fast shipping grate parts
grate parts
Guest -
August 29, 2022
Verified Purchase
Work as expected
The part arrive soon. Is working very good. Excellent service.
Guest -
June 28, 2022
Verified Purchase
Very good material cheep to buy easy stall
Fit perfectly to my reading mower very easy work with
Guest -
May 16, 2022
Verified Purchase
fit perfectly and arrived in a reasonable time
fit perfectly
Guest -
October 11, 2021
Verified Purchase
Just what was to needed to fix the mower
Fixed the mower
Guest -
September 24, 2021
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Ring Clip
Is this a 1/2" or 3/4" part? Thanks for your help!
Faye
for model number Husqvarna 812000029
asked on 2022-07-07
Hi Faye,
Thank you for your question. The ring measures approximately 1-1/16 inches. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team July 07, 2022
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The wheel came off
Ranny - May 5, 2016
👍 15 of 18 people found this instruction helpful
Tool Type
Lawn Tractor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, N/a
I removed the axle cap the the e-clip and washer. pull the wheel off. The installed the new bearing. and the washers behind the wheel. I put some lube on the axle. Slipped the wheel back on, put the washer and e-clip back on the axle, then the axle cap. Done
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Retaining clip broke off axle
mike - February 24, 2017
👍 9 of 9 people found this instruction helpful
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Removed wheel-cleaned up bearing
Greased axle after cleaning
Slid on wheel and bearing
Attached clips purchased from "replacement parts.com"
Just like new!!..thanks folks.
Greased axle after cleaning
Slid on wheel and bearing
Attached clips purchased from "replacement parts.com"
Just like new!!..thanks folks.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Lawn Tractors front axle had started to bent on the left side causing it to eventually crack at a weak point.
James - September 10, 2018
👍 4 of 4 people found this instruction helpful
Tool Type
Lawn Tractor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Pneumatic Air Wrench, Grease Gun
Elevated front of mower to remove the Tie Rod from both Left and Right Spindle Assemblies and then both Spindle Assemblies from old Axle. Next removed 5/8-11 bolt and lock nut that fastens the Front Axle to the Front and Rear Axle Braces. Next removed bolts that hold the front Axle Brace along with Front Chassis Suspension Bracket to remove Axle. Next Reinstalled the new Front Axle with new Axle Brace Spacer and Axle Spacer back onto the mower in the reverse order of disassembling. Replaced all Bearings for both Left and Right Spindles and installed onto the new Axle. Next installed new Draglink Bushing to the right Spindle and installed Tie Rod. Remember to grease both the Axle Spindles and Both Tire Spindles.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Right front wheel came loose with axle cap flange bearing, ring clip, and washer all missing
Jeff - April 6, 2018
👍 4 of 5 people found this instruction helpful
Tool Type
Lawn Tractor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers
1. Didn't know exactly how to match parts, so I jacked the front of the mower up and braced on blocks with both wheels off ground; took off the left front wheel to find which parts were needed. Searched for parts on the web and ereplacements had the parts and with pictures. This was a great help to know I was getting the right parts. Also, the tutorials of others who had had replaced the same parts was a big help.
2. Cleaned the axle shaft and left front wheel parts, regreased all pieces and put back together.
3.Did the same with the right wheel using new parts.
Not a hard job.This is an old mower passed down from others. Did not realize how much the front axle and parts were in need of greasing.
2. Cleaned the axle shaft and left front wheel parts, regreased all pieces and put back together.
3.Did the same with the right wheel using new parts.
Not a hard job.This is an old mower passed down from others. Did not realize how much the front axle and parts were in need of greasing.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Ring clamp broke
John - July 6, 2018
👍 3 of 4 people found this instruction helpful
Tool Type
Lawn Tractor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Pulled the front wheel off, cleaned it, installed new washers and the ring clamp. Mowed two acres without the wheel coming off..
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Front wheel was about to fall off
paul - October 2, 2022
Tool Type
Lawn Tractor
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Pliers for the clip. Drift pin.
I drove the old bearings out with a drift pin, pounded the new ones using an appropriately sized socket, greased it and installed the outer washer and clip. Easy
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Axle broke and wheel assembly parts needed replaced
Faron - December 3, 2020
Tool Type
Lawn Mower
Difficulty
Medium
Time
15-30 minutes
Tools Used
Pliers, Socket set, Wrench Set
Removed tire, removed spindle. Replaced right side spindle, insert washers, bearing and wheel. Inserted ring on axle then replaced the tire. Forgot to order the replacement cap.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Steering gear warn out
Cliff - August 24, 2020
Tool Type
Lawn Tractor
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, Adjustable Wrench
Removed mowing deck.
Pull steering wheel
Unbolted bracket with steering gear
Replace warn parts with replacement
Checked alignment of steering gear
Bolted back in place
Replace steering wheel and shaft
Replaced mowing deck
Pull steering wheel
Unbolted bracket with steering gear
Replace warn parts with replacement
Checked alignment of steering gear
Bolted back in place
Replace steering wheel and shaft
Replaced mowing deck
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Steering sector gear worn so only turn wheel in one direction, other way gears slipped
KENNETH - April 9, 2020
Tool Type
Lawn Tractor
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, hammer
Already had all steering parts for steering wheel & shaft removed from tractor
1. Replaced Babbitt flange bearing in support bracket.
2 Installed new sector gear with new bushings and old thrust washers into support bracket
3.Installed support bracket into tractor (most difficult part)
4. Installed exist shaft through support bracket bearing with new bushings & exist thrust washers through to upper support. Aligned gears to center position and secured shaft with new ring clip (not easy either).
5. Attached existing drag link to gear and safety switch to bracket.
6. Mounted exist steering wheel to shaft and tested steering.
NOTE: All parts mounted perfectly EXCEPT I had to chase the threads of the new sector gear to remove paint overflow.
1. Replaced Babbitt flange bearing in support bracket.
2 Installed new sector gear with new bushings and old thrust washers into support bracket
3.Installed support bracket into tractor (most difficult part)
4. Installed exist shaft through support bracket bearing with new bushings & exist thrust washers through to upper support. Aligned gears to center position and secured shaft with new ring clip (not easy either).
5. Attached existing drag link to gear and safety switch to bracket.
6. Mounted exist steering wheel to shaft and tested steering.
NOTE: All parts mounted perfectly EXCEPT I had to chase the threads of the new sector gear to remove paint overflow.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
E clip worn.
Bill - October 14, 2019
Tool Type
Lawn Tractor
Difficulty
Easy
Time
30-60 minutes
Tools Used
Pliers, grease gun
Parts Used
Removed the wheel, checked axle for ware.
Replaced wheel, installed new e clip. Greased and returned to service.
Replaced wheel, installed new e clip. Greased and returned to service.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
