Easy
15-30 minutes
This cord protector is a genuine Porter Cable replacement part and is sold individually.
Cord Protectors are designed to slide onto your cord and fit securely at the end, where it’s firm rubber will protect the base of the cord from getting bent and pinched.
Which can expose the wires and become a safety hazard.
Reliever 810716
OEM part for: Porter Cable, DeWALT, Black and Decker, Stanley
Part Number: 810716
$6.09
In Stock
Order within the next 11 hours and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Reliever will fit the following 404 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Porter Cable
DeWALT
Black and Decker
Stanley
Show More Compatible ModelsThis item works with the following types of products:
- Saw Parts
- Trim Saw Parts
- Drill Parts
- Electric Drill Parts
- Screwdriver Parts
- Grinder Parts
- Shear Parts
- Band Saw Parts
- Router Parts
- Plate Joiner Parts
- Laminate Trimmer Parts
- Engine Parts
- Sander Parts
- Polisher Parts
- Hammer Drill Parts
- Planer Parts
- Jig saw Parts
- Miter Saw Parts
- Drain Cleaner Parts
Repair Videos ?
Watch the Repair Video for
Reliever
Articles:
|
Protect your power cord. Step-by-step instructions show you how to remove and install the cord protector on your Porter ...
October 08, 2015
|
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
PERFECT
EVERYTHING WENT PERFECT
Guest -
March 16, 2022
Verified Purchase
Just what came on the porter cable band saw. Very good cord protector
Great condition, arrived on time.
Jimmy -
March 16, 2021
Verified Purchase
Gotta have it
Even if you get a replacement cord from one of the big box stores like I did, you'll need this at the entry point to the tool.
Dennis -
February 27, 2020
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Reliever
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Bearing noise
Stephen - April 28, 2022
Tool Type
Grinder
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Bearing press
Disassemble, clean, inspect, remove, replace, lube and reassemble.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Cord had breaks in wire covering
Eugene - March 19, 2021
Tool Type
Router
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, None
Parts Used
Removed screws from router handle as required removed old cord and installed new cord.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Power cord, blade guard handle
Roger - April 22, 2019
Tool Type
Circular Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Socket set, Solder less connections
R+R power cord, install guard handle
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Cord reliever broke and wires were getting chewed up at the tool
Michael - October 1, 2018
Tool Type
Band Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
1. Removed half of the handle
2. Remove wires from saw and switch
3. Installed new reliever on cord and reconnected wires
2. Remove wires from saw and switch
3. Installed new reliever on cord and reconnected wires
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Rubber tires were worn, reliever was ripped
gary - August 25, 2017
Tool Type
Band Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Torx bit
Parts Used
Removed the handle half
Disconnected the cord wires from the switch
Removed the old reliever and slid on the new one
Connected the cord wires to the switch
Installed the handle half
Removed the old tires from the pulleys and installed the new ones on
Disconnected the cord wires from the switch
Removed the old reliever and slid on the new one
Connected the cord wires to the switch
Installed the handle half
Removed the old tires from the pulleys and installed the new ones on
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Replace the power cord and outlet on the D-handle on Porter Cable Router
Andrew - January 29, 2016
Tool Type
Router
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Wire cutters
Parts Used
Remove handle half from D-handle. Make a wiring diagram of where all the wires are located, or take a cell phone picture. Remove cord clamp. Then remove the wires from the switch and the outlet the outlet wires, Don't to forget to put the rubber reliever in place first before you wire everything up, otherwise....oops, have to take it all apart and start over again. But 2nd time was the charm....runs like a champ.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
