Easy
15-30 minutes
This pin assembly is supplied directly from the original equipment manufacturer. This component is constructed of metal, and is compatible with several stapler devices. The pin assembly is fitted onto the piston, helping to secure the driver. This item is sold individually. A hex key is helpful in the removal and replacement.
Pin Assembly KA0001
OEM part for: Senco
Part Number: KA0001
$5.31
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 6 machines
Senco
SKSXP Medium Wire Stapler View Diagrams & Manuals
SFN1 Nailer View Diagrams & Manuals
SFN1+ Nailer View Diagrams & Manuals
SKS Stapler View Diagrams & Manuals
SKS18 (300052N) 18 Gauge Stapler (Sks) View Diagrams & Manuals
SKS18 (300084N) "sks (N12-N17) Stapler, Contact Actuation" View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Stapler Parts
- Nailer Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Pin Assembly
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Broken driver blade
michael - October 4, 2018
Tool Type
Stapler
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Allen wrench, pin punch, clean towel
1. Remove cylinder cap/muffler assembly
2. Remove piston/driver assembly
3. Remove both roll pins from piston/driver assembly
4. Install new driver with both new roll pins
5. Inspect cylinder for any debris from broken driver, remove any found pieces
6. Inspect for any damage to cylinder wall ie scratches/burrs
7. If none found reassemble using new seal on piston if existing is damaged
8. Tighten the 4 allen head screws on cap assembly evenly / being careful not to over tighten
2. Remove piston/driver assembly
3. Remove both roll pins from piston/driver assembly
4. Install new driver with both new roll pins
5. Inspect cylinder for any debris from broken driver, remove any found pieces
6. Inspect for any damage to cylinder wall ie scratches/burrs
7. If none found reassemble using new seal on piston if existing is damaged
8. Tighten the 4 allen head screws on cap assembly evenly / being careful not to over tighten
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Replaced seals pins and retrofit kit
alfred - March 31, 2017
Tool Type
Nailer
Difficulty
Easy
Time
30-60 minutes
Tools Used
Nutdriver, Allen wrench
Removed the screws holding the cap on.
Removed the driver
Removed the old cylinder
Installed the seal and other parts listed
Cleaned the gun through out and oiled it
Put it back together
Replaced the cap
Shoots like a new nail gun
Removed the driver
Removed the old cylinder
Installed the seal and other parts listed
Cleaned the gun through out and oiled it
Put it back together
Replaced the cap
Shoots like a new nail gun
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Driver broke piston wore out
JAMES - October 3, 2016
Tool Type
Stapler
Difficulty
Easy
Time
15-30 minutes
Tools Used
Nutdriver, Adjustable Wrench, 2 Punches
Remove the top of the gun, remove the piston/driver. Remove the worn seals. Clean and lube the inside of the gun. Line up the hole in the driver and the hole in the piston, then with a punch drive the larger pin in first, then the small pin inside of the larger one. Install the piston and driver, and the new seals. Then replace the top.
Easy to get parts from you by going to your model break down of exact staple gun and order parts. Thanks, been using you for years...
Easy to get parts from you by going to your model break down of exact staple gun and order parts. Thanks, been using you for years...
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
