Please note shipping times may be longer than expected due to carrier delays.
eReplacementParts.com
877-346-4814
Senco Parts
Preferred Partners of

Seal

Part Number: LB0012
Senco
Availability: 17 in stock
Price: $4.00
Order within the next 14 hours
and your part ships today!
Product Information
Manufacturer: Senco
Product Number: LB0012
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Description:
This is an Authentic OEM replacement part for use with Senco Nailers/Staplers. This item is made out of Rubber and it is Sold Individually. The purpose of this part is to create a seal so air does not leak from the gun. When replacing this Seal it is advised to inspect all of the other Seals and O-Rings for wear.

When replacing this item you would need an Allen Wrench Set and Pliers.
Frequently Purchased With
Compatibility

This part is compatible with the following machines:

Senco
Expand the 70 compatible machines
Products Compatibility

This item works with the following types of products:

  • • Nailer
  • • Stapler
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Stapler
Parts Used:
Seal - LB0012
Seal - LB0030
Seal - LB5046
Seal - LB0777
Retrofit Cylinder Kit - YJ0035
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, Allen wrench
Would not fire a staple
Replaced the worn o rings and the redesigned firing cilinder ,cleaned and lubed all parts and put back together . Works as good as new.
Very pleased with results .
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Parts Used:
Seal - LB0012
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
would not drive nail
put in new seals
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Parts Used:
Seal - LB0012
Seal - LB0024
Seal - LB0034
Seal - LB0133
Seal - LB3224
Seal - LB5005
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, Allen wrench
Did not fire
Installed all the new seals I ordered. The nylon seal needed to be heated up so it would streach. I put it in a dish of water and microwaved it for one minute on high, that made it just flexible enough to get it on to the piston top.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Parts Used:
Seal - LB0012
Seal - LB0024
Seal - LB3505
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set
Leaks air
Replaced the worn seals.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Parts Used:
Seal - LB0012
Retainer - KC0062
Seal - LB0018
Seal - LB0030
Rail - GF0041
Seal - LB5046
Seal - LB0777
Pin Assembly - KA0001
Retrofit Cylinder Kit - YJ0035
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Nutdriver, Allen wrench
Replaced seals pins and retrofit kit
Removed the screws holding the cap on.
Removed the driver
Removed the old cylinder
Installed the seal and other parts listed
Cleaned the gun through out and oiled it
Put it back together
Replaced the cap
Shoots like a new nail gun
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Stapler
Parts Used:
Seal - LB0012
Seal - LB0030
Seal - LB5046
Seal - LB0777
Retrofit Cylinder Kit - YJ0035
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Allen wrenches, mallet
Plunger not retracting
Removed the top cap assembly
Removed the piston and driver
Tapped on the housing with a mallet, with the stapler upside down to release the cylinder.
Installed the new cylinder
Installed all of the other seals and o-rings
Place the top cap on.
Shoots like it's new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Stapler
Parts Used:
Seal - LB0012
Seal - LB0030
Seal - LB5046
Seal - LB0777
Retrofit Cylinder Kit - YJ0035
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
, Allen wrench
dried out rubber
Senco SKS gun (mid 90'). Remove four alan screws at the top of the cylinder and everything pulls straight out without any other tools. The old plastic piston is no longer made and the seal is no longer available for it. Since that was the main problem with the gun, I bought the new style aluminum piston. It slides right in. Lube all the rubber with silicone o-ring lube. Good as new again.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5
Average Rating (out of 5):
2 Reviews
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Easy repair
    Part fix as it should.
    Guest - February 16, 2022 Verified Purchase
    Got the parts I needed tbey fit perfectly and great customer service
    Nail gun is now fixed and ready to work.
    Guest - November 27, 2020 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Senco
    Product Number: LB0012
    Classification: Part
    Weight: 0.01 lbs.
    Shipping: Ships Worldwide

    Fixing things makes sense...

    ...And we make it easy! With our Fix app, you always have a personalized repair guide on-hand. Easily find manuals and replacement parts on your phone while you’re DIYing in the garage or garden.

    "Love the flexibility of the app to add everything in the home and garage. Access to manuals and parts right there makes it convenient."

    Available on the App Store Get it on Google Play
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal