It is a genuine item that is supplied by the original equipment manufacturer for use with Poulan, Husqvarna and Jonsered chainsaws. The impulse pipe is a special component that attaches to the carburetor adapter. If the engine runs poorly or it starter and then quickly dies off, either carburetor itself or the intake parts are causing the issues. Refer to the appropriate diagrams of your model for the exact location and the correct installation of the new part. One durable plastic impulse pipe is included. Check your owner\\\'s manual for the proper gas-to-oil mixture to ensure your equipment runs properly. You will need a screwdriver to remove the carburetor adapter when replacing this part.
Impulse Pipe 530053435
OEM part for: Husqvarna, Poulan, Jonsered
Part Number: 530053435
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 45 machines
Poulan
Husqvarna
Jonsered
This item works with the following types of products:
- Chain Saw Parts
- Saw Parts
This part replaces obsolete part #: 530019171
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Impulse Pipe
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The plastic impulse pipe was no longer making a good seal (20 year old saw - original equipment).
Tool Type
Chain Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set
2) Removed the air filter/air filter plate/carburetor/carburetor plate.
3) Replaced the impulse pipe between the cylinder head and carburetor plate.
4) Reinstalled the carburetor plate & carburetor (replacing the old gasket - making sure the fuel line was routed where it was not kinked, or crimped).
5) Reinstalled the air filter plate and replaced the air filter.
6) Reinstalled the shroud.
Saw would not stay running; Clutch cover cracked.
Tool Type
Chain Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, Adjustable Wrench
2. Removed and replaced the clutch cover.
3. Re-ran the new fuel line to the carburetor.
Chainsaw would not run/throttle up smoothly and stay running
Tool Type
Chain Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Pliers, Socket set, Nutdriver
Cracked impulse pipe on Husqvarna Chainsaw
Tool Type
Chain Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Nutdriver
Parts Used
engine seized
Tool Type
Chain Saw
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, homemade spanner wrench
Lost power when load on it
Tool Type
Chain Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Wrench Set, Adjustable Wrench, Heat gun
The fuel line and filter were completely junk....I decided to go through the entire saw
Tool Type
Chain Saw
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set, Nutdriver, Specialty carburetor adjustment tool
2. Cleaned all of the parts in solvent and used compressed air where necessary
3. Dismantled Walbro carburetor to inspect and clean
4. Reassembled carburetor installed new spark plug
5. Swapped out parts and installed the chain brake on the new clutch cover
6. Fine tuned the carburetor after warm up.
Runs like a champ!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.