Handle Knob 98-7134

Description:

This replacement handle knob is specially designed for use with Toro lawn and garden equipment. This wing knob is generally used to secure handles. Please make sure to check appropriate diagrams to ensure correct location and application of the item. It is made out of black plastic and it is sold individually. Please note screw/bolt is sold separately.

Frequently Purchased With

Handle Screw
$6.84

Curved Washer..
$6.84

Screw
$6.84

Primer Bulb
$6.87

Screw-carr
$6.84

Filter-a/c Car..
$7.23

Lock-handle
$6.84

Cable Anchor
$6.84

Compatibility

This part is compatible with the following machines:

Toro

Expand the 150+ compatible machines

Products Compatibility

This item works with the following types of products:

• Lawn Mower
• Snowblower
• Trimmer

Repair Instructions: Submitted by Customers Like You

Tool Type:

Lawn Mower

Parts Used:

Handle Knob - 98-7134

Wheel Asm - 92-9590

Cable-brake - 99-1509

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Socket set

Drive wheels worn out

Removed rear wheels with socket on axle bolt. Removed excess (old grease) from plastic housing behind wheel gear. Greased shoulder bolt & gear on wheel, reinstalled new wheel. It's easier to install if you release the height adjustment & swing it all the way down so you can hold the nut in place for the shoulder bolt.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used:

Handle Knob - 98-7134

Knob - 98-8332

Friction Ring - 65-4710

Clutch Washer - 65-4760

Nut-clip - 94-1610

Screw-sems - 614677

Nut-cage - 613765

Plate-Mulch - 92-8630

Fan-mulching - 99-6351-03

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers, Socket set

Simply restoring a silver series 4.75hp model 10314

Simply restoring. Silver series 4.75hp model 10314. Ereplacementparts has had everything I've looked for in stock and in timely manner.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used:

Grip-starter Rope - 281434S

Rope-starter - 280399S

Handle Knob - 98-7134

Stop-rope - 2210-316

Cable-traction - 99-1510

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Pliers, Socket set, Wrench Set

Replace worn out starter rope and pull handle,

1 Remove starter housing
2 Pulled rope all the way out and held fully extended
3 Cut knot on old rope and discarded it then threaded new rope with handle installed, tied knot and let the rope slow retract in
4 Place new stop in to position and crimped on to rope.
5 Take plastic cover of drive belt( 1 screw on mine) remove bolt that hold cable then remove and replaced traction cable, adjusted to proper position to engage drive belt. after complete put cover back over drive belt
Very simple repair, just need to pay attention to how you disassemble to make sure everything aligns with out interference.
Handle knobs just remove old one and spin new ones on.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Snowblower

Parts Used:

Handle Screw - 92-2260

Curved Washer - 107-3844

Handle Knob - 98-7134

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Socket set

Vibration caused the nut and bolt holding the handle to fall off, lost in the snow.

The exact replacement parts bolted together and the handle is good as the day I bought my Toro snowblower.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used:

Rope-starter - 280399S

Handle Knob - 98-7134

Wheel Asm - 92-9590

V-belt - 99-1597

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Socket set

Starter rope broke

1. Removed cowl and starter assy.
2. Removed broken rope
3. Attached new rope
4. Wound spring tight
5. Reattached starter rope assy
6. Reassembled cowl

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used:

Screw-carr - 99-6019

Handle Knob - 98-7134

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Knobs and bolts lost in a move

I was able to secure the lower handle to the handle support with these parts.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

4 Reviews

Click to filter by ratings:

5 stars

4

4 stars

0

3 stars

0

2 stars

0

1 stars

0

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

replacement knobs

The part was in great condition, it arrived quickly and fit perfectly. My snowblower is working like new again.

Guest - March 18, 2021 Verified Purchase

Hand knob

Worked as expected

rodger - September 21, 2020 Verified Purchase

Easy repair

Lawnmower runs like new again.

Guest - April 22, 2020 Verified Purchase

knobs and bolts

Super service. on non local parts.

Guest - April 24, 2019 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

Questions & Answers for Handle Knob