Medium
30-60 minutes
This is a genuine replacement part sourced from the original manufacturer for use with walk-behind lawnmowers. The special rope stop fits into the starter rope handle and is used to secure the starter rope. This part is available as an individual replacement part, see illustrated part list for similar mower parts.
Stop-rope 2210-316
OEM part for: Toro
Part Number: 2210-316
$8.63
In Stock
Order within the next 1 hour and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This Stop-rope will fit the following 1164 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 20 of 1164 matching models.
1164 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Lawn Boy
- Toro
This item works with the following types of products:
- Blower
- Lawn Mower
- Vacuum
This part replaces obsolete part #: 92-1701
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Stop-rope
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Lawn mower pull rope broke & the belt for the self propel was stretched out
Lawrence - November 14, 2020
Tool Type
Lawn Mower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Socket set
Removed the starter rope assembly and removed the old rope but not before winding it back and putting a screwdriver into it to hold it.
Put the new rope through the ring on the mower handle.
Then attached it to the spring wound assembly and carefully removed the screwdriver as the spring will pull the new rope in.
Reattach the pull starter assembly back on the mower.
I crimped the new lead stop on the mower rope.
The next thing that I did was change the belt on the self propel pulleys.
Put the new rope through the ring on the mower handle.
Then attached it to the spring wound assembly and carefully removed the screwdriver as the spring will pull the new rope in.
Reattach the pull starter assembly back on the mower.
I crimped the new lead stop on the mower rope.
The next thing that I did was change the belt on the self propel pulleys.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Starter rope broke
David - June 20, 2020
Tool Type
Lawn Mower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Nutdriver, Socket
Remove engine shroud. Cut off old rope.turn rope holder counter clockwise seven or eight turns. Hold with screwdriver so it does not turn. Tread new rope in hole and tie knot at other end of rope do the same for the handle. Take out screwdriver and install shroud on engine.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Replace worn out starter rope and pull handle,
James - May 14, 2018
Tool Type
Lawn Mower
Difficulty
Medium
Time
15-30 minutes
Tools Used
Pliers, Socket set, Wrench Set
1 Remove starter housing
2 Pulled rope all the way out and held fully extended
3 Cut knot on old rope and discarded it then threaded new rope with handle installed, tied knot and let the rope slow retract in
4 Place new stop in to position and crimped on to rope.
5 Take plastic cover of drive belt( 1 screw on mine) remove bolt that hold cable then remove and replaced traction cable, adjusted to proper position to engage drive belt. after complete put cover back over drive belt
Very simple repair, just need to pay attention to how you disassemble to make sure everything aligns with out interference.
Handle knobs just remove old one and spin new ones on.
2 Pulled rope all the way out and held fully extended
3 Cut knot on old rope and discarded it then threaded new rope with handle installed, tied knot and let the rope slow retract in
4 Place new stop in to position and crimped on to rope.
5 Take plastic cover of drive belt( 1 screw on mine) remove bolt that hold cable then remove and replaced traction cable, adjusted to proper position to engage drive belt. after complete put cover back over drive belt
Very simple repair, just need to pay attention to how you disassemble to make sure everything aligns with out interference.
Handle knobs just remove old one and spin new ones on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
