Grid squares measure 1x1 inch

Watch The
Repair Video

Guard-Top

Part Number: A162000050

1 Reviews

Ships within 1 business day

Questions & Answers

Repair Instructions

Product Information

Description:

This is an authentic replacement part for use with Echo trimmers, it is not an aftermarket imitation. The plastic top guard is used to protect the engine cover. This top guard is sold individually, and is held by one screw which is available separately. One screwdriver is required to install this part.

Warning: California's Proposition 65

Frequently Purchased With

Screw
$2.99

Cover-Engine
$10.01

Cover-Engine
$11.04

Screw 4x8
$3.99

Compatibility

This part is compatible with the following machines:

Echo

Expand the 105 compatible machines

Questions & Answers

Sort by

No questions have been asked yet

Repair Instructions: Submitted by Customers Like You

Tool Type:

Trimmer

Parts Used:

Intake Gasket - 13001013410

Intake Gasket - V103001360

Guard-Top - A162000050

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers, Nutdriver

Leaking fuel around the carburetor

removed air cleaner, fuel lines and carb. installed the gaskets and put back together

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Trimmer

Parts Used:

Guard-Top - A162000050

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Top guard broken

Removed old one with screwdriver and installed new one.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Hedge Trimmer

Parts Used:

Guard-Top - A162000050

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Broken safety guard

Unscrewed the broken guard, then screwed in the new one

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Trimmer

Parts Used:

Guard-Top - A162000050

Tune-Up Kit - 90152Y

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers, Socket set

Echo Trimmer- I broke the Guard Top and it is an old trimmer and had never been tuned up

1. Screwdriver to remove broken Guard Top and used same screw to put the new on on- 2 minutes. super easy for anyone
2. Checked gap on plug used socket to remove old one and install new one- 5 minutes
3. Undid wingnut to remove air cleaner cover and took out old air cleaner and replaced with new one- 5 minutes
4. Changing fuel filter was a little tricky. The fuel filter is on the end of the fuel line which sits in the bottom of the fuel tank. Pulled fuel lines out of tank by pulling out rubber grommet which is on top surface of fuel tank. Pulled old fuel filter off the end of fuel line. New filter was significantly bigger than old one and was too big for the hole that the grommet came out of. Had to replace grommet with fuel lines back in top of tank and then fish the fuel line out with needle nose pliers. Then put new filter on fuel line and was able to feed it back into the tank through the fuel filler hole. This took about 10 minutes.
5. The trimmer runs just fine- I am just a home owner but there is a reason why the professional yard guys use Echo equipment. I have an Echo Back pack blower in addition to the trimmer and both are rugged beyond belief.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blower

Parts Used:

Air Cleaner Case Assembly - P021002921

Guard-Top - A162000050

Air Filter - A226001410

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes