Gasket-Intake [27828S] for Briggs and Stratton Lawn Equipments

Description:

It is a manufacturer supplied replacement part that is designed for use with Briggs and Stratton engines. This carburetor intake gasket which provides an air tight seal for the breather assembly. Over time gaskets tend to deteriorate and crack eventually needing a replacement. It is made from durable composite material and it is sold individually.

Frequently Purchased With

Carburetor Ove..
$35.90

Valve-Fuel Inl..
$7.90

Carburetor Bod..
$4.60

Gasket-Carbure..
$4.98

Gasket-Nozzle..
$6.14

Gasket-Intake ..
$4.73

Compatibility

This part is compatible with the following machines:

Briggs and Stratton

Expand the 150+ compatible machines

Repair Instructions: Submitted by Customers Like You

Tool Type:

Engine

Parts Used:

Screw (Upper to Lower Carburetor Body) - 691587

Element-Air Cleaner - 270093

Gasket-Intake - 27828S

Carburetor Overhaul Kit - 394693

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Socket set, Wrench Set

Had not used this greater for several yrs and the gaskets in the carb hardened and leaked

1 Removed carburetor 2/ Totally disesesembled carb 3/ matched all parts in kit 3/ Reesembled carb reconnected carb to engine (2 phillips bolts) 4 put gasoline into gas tank and pumped gas into carb to check for leaks. The whole process took a little over an hour. Pretty simple to re do.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used:

Kit-Idle Mixture - 292681

Gasket-Nozzle - 691610

Valve-Needle - 394683

Packing-Needle Valve - 691606

Gasket-Intake - 27828S

Carburetor Body Gasket - 27918

Gasket-Carburetor Mounting - 270684

Nozzle-Carburetor - 398202

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers, Power Drill, Nutdriver

Carburetor was all plugged up needed all new parts

Disassemble complete carburetor and do a total rebuild works perfectly retapping the threaded holes and new needle and seat are the key

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Generator

Parts Used:

Gasket-Nozzle - 691610

Gasket-Intake - 27828S

Gasket-Carburetor Mounting - 270684

Body Assembly-Upper Carburetor - 399443

Repair Difficulty:

Medium

Time Spent Repairing:

More than 2 hours

Tools Used:

Screwdriver, Pliers, Socket set, Wrench Set

Upper carburetor flange broke requiring replacement

The repair was pretty straight forward. One aspect that took a while to figure out is that you have to remove the jet and tube through the main jet adjusting screw on the bottom to be able to remove the upper carburetor assembly.
Also I had to slightly ream the holes in the new assembly to get the float pin to fit.

Runs good now.

Did you find this story helpful?

Thanks for voting and helping fellow customers!