eReplacementParts.com
877-346-4814
Shindaiwa Parts
Repair Parts Home  Lawn Equipment Parts  Shindaiwa Parts  69601552632 Cutter Blade
photo thumbnailphoto thumbnail360 degree photo thumbnail

Cutter Blade

Part Number: 69601552632
EchoShindaiwa
Availability: 25+ in stock
Price: $5.79
Order within the next 4 minutes
and your part ships today!

*This part replaces obsolete part #: 69601552630 and 99909-0020.

Product Information
Manufacturer: Echo, Shindaiwa
Product Number: 69601552632
Classification: Part
Weight: 0.75 lbs.
Shipping: Ships Worldwide
Description:
This is a genuine manufacturer sourced replacement part. It is specially designed for use with Shindaiwa and Echo trimmers/edgers. These blades are perfect for edging level ground around sidewalks and driveways. Includes two (2) metal blades per order. To replace it you would need a wrench to remove the blade nut.
Compatibility

This part is compatible with the following machines:

Shindaiwa
Echo
PE-200 (S68211001001 - S68211999999) Edger
PE-225 (S78611001001 - S78611999999) Edger
PE-2000 (Type 1E) (After S/N 001001) Edger
PE-2000 (Type 2E) (After S/N 001001) Edger
PE-225 (S78712001001 - S78712999999) Edger
PE-225 (S78813001001 - S78813999999) Edger
PE-230 (05001001 - 05999999) Edger
PE-230 (06001001 - 06999999) Edger
PE-230 (07001001 - 07999999) Edger
PE-200 (S75512001001 - S75512999999) Edger
PE-266 (T42811001001-T42811999999) 25.4cc Edger
PAS-225 (S59511001001-S59511003000) Gas Power Source Attachement
PAS-225 (S59511003001-S59511999999) Gas Power Source Attachement
PAS-225 (S59612001001-S59612022000) Gas Power Source Attachement
PAS-225 (S59612022001-S59612999999) Gas Power Source Attachement
PAS-225 (S86813001001-S86813999999) Gas Power Source Attachement
PAS-230 (05001001-05999999) Gas Power Source Attachement
PAS-230 (06001001-06999999) Gas Power Source Attachement
PAS-230 (07001001-07999999) Gas Power Source Attachement
PAS-230 (S67711001001-S67711999999) Gas Power Source Attachement
PAS-230 (S75212001001-S7521999999) Gas Power Source Attachement
PAS-230 (S82713001001-S82713999999) Gas Power Source Attachement
PAS-266 (T44211001001-T44211999999) Gas Power Source Attachement
PAS-266 (T44312001001-T44312999999) Gas Power Source Attachement
PAS-266 (T44413001001-T44413999999) Gas Power Source Attachement
PE-266 (T41813001001-T41813999999) 25.4 cc Edger
PE-266 (T42912001001-T42912999999) 25.4 cc Edger
PE-266S (T43611001001-T43611999999) 25.4 cc Edger
PE-266S (T43712001001-T43712999999) 25.4 cc Edger
PE-266S (T43813001001-T43813999999) 25.4 cc Edger
PAS-280 (T44511001001-T44511999999) Pro Attachement Series
PAS-280 (T44612001001-T44612999999) Pro Attachement Series
PAS-280 (T44713001001-T44713999999) Pro Attachement Series
99944200470 Power Edger Attachment
PAS-225VP (S59511001001 - S59511003000) Gas Power Source Attachment
PAS-225VP (S59612001001 - S59612022000) Gas Power Source Attachment
99944200465 (S89200001001 - S89200999999) Bed Redefiner Attachment
99944200475 Edger Attachment
SRM-2100SB (Type 1)(001001-008231) Straight Shaft Trimmer/Brushcutter Parts
PE-2620S (U15215001001-U15215999999) Edgers Edgers (Pe)
BRD-2620 (U05715001001-U05715999999) Edgers Bed Redefiners (Brd)
Expand the 89 compatible machines
Products Compatibility

This item works with the following types of products:

  • • Edger
  • • Trimmer
Questions & Answers

Do the edger blades come sharpened or do they even need to be sharpened?
Michael for model number PE-230 asked on 2019-07-19
Hello Michael, Thanks fro the question! No, you do not need to sharpen edger blades. It is best if you do not sharpen the blades, just replace when worn down. We hope this helps you!
I bought this edger attachment used and do not know how long a new blade is so not sure how worn the blade I have is. Can you tell me how long the new blade is? Thanks.
Tony Cattedra asked on 2019-04-10
Hello Tony , Thank you for the question. According to the 1 inch grid, the blade is 8" long and 2" wide. Hope this helps!
What is the thickness of the blade?
Calvin for model number Echo PE230 Power Edger Blade asked on 2019-09-12
Hello Calvin , Thank you for the question. According to the 1 inch grid, the blade is 8" long and 2" wide with a Standard .090" blade thickness. Hope this helps!
What are the part numbers that I need to order just the cutting blade-retainer nut and cotter pin?
Joe for model number Echo PE225 asked on 2019-07-31
Hello Joe, thank you for your question! The blade itself sits on an adapter plate (part number C535000140), and is held on by the blade fixture (part number C535000150), nut (part number 90051300010), and the cotter pin (part number 90030020022). You may not need to replace all of these parts, but we do recommend checking them all to ensure they are in good condition! It is important to note when changing the blade that you will have to turn it clockwise to take it off, as opposed to counter-clockwise. Hope this helps!
Does this package of replacement blades for this model come with the correct nut and cotter pin to secure the blade to the edger?
Joe for model number Pe 225 Edger asked on 2019-07-26
Hi Joe, these are just the blades only the nut and cotter pin would be sold separately. Thank you for your question and good luck with your repair!
Repair Instructions: Submitted by Customers Like You
7 of 12 people found this instruction helpful
Tool Type:
Edger
Parts Used:
Cutter Blade - 69601552632
Air Filter - A226001410
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers, Socket set, screw to fit in hole to keep blade from moving
Worn down cutting blade
Remove the cotter pin from the blade nut, then remove the blade nut and blade washer. Then remove the blade. Install the new blade on the shaft, then put the rest of the parts on in reverse order.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Edger
Parts Used:
Cutter Blade - 69601552632
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers, Socket set
The original blade had reduced in size so a replacement was needed.
I removed the old blade and replaced with a new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 2 people found this instruction helpful
Tool Type:
Edger
Parts Used:
Cutter Blade - 69601552632
Flap-Debris - 69901755330
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Socket set, Adjustable Wrench
Worn blade, broken debris flap.
Replaced blade and debris flap. Very simple for someone with basic mechanical skills.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Edger
Parts Used:
Cutter Blade - 69601552632
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Socket set, Drift pin
Change worn edger blade
Unplugged the spark plug
Set drift pin to prevent blade from turning
Removed cotter pin
Removed nut
Replaced blade
Placed nut on
Reinstalled cotter pin
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Edger
Parts Used:
Cutter Blade - 69601552632
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Socket set
Blade needed replaced
Just unscrewed the retainer nut took off worn down blade and put a new one on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 2 people found this instruction helpful
Tool Type:
Edger
Parts Used:
Fuel Filter - A369000480
Purge Bulb - P005003120
Fuel Return Tube - 13201056330
Spark Plug - 15901019830
Cutter Blade - 69601552632
Fuel Line - V471001190
Air Filter - A226001410
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Socket set
General maintenance.
Removed and replaced the parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4
Average Rating (out of 5):
4 Reviews
Click to filter by ratings:
5 stars
2
4 stars
1
3 stars
0
2 stars
1
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • easy to find and good product
    I've been using eReplacement parts for years and it's still a great value for the price especially compared to dealers prices!! I will try to do brick and mortar so long as I am not getting gouged. This same blade was 3 times the cost at brick and mortar.
    Tim - June 24, 2020 Verified Purchase
    Excellent part worked as expected
    Cutter blades arrived on time now I'm up and running again thanks
    Guest - April 6, 2020 Verified Purchase
    Easy repair......well priced!
    This is a considerably durable item so it arrived in great shape....with cotter pins included!
    Guest - July 4, 2019 Verified Purchase
    Too slow
    The part was fine but it took much longer to arrive than your delivery time said it would take.
    Guest - May 14, 2020 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Echo, Shindaiwa
    Product Number: 69601552632
    Classification: Part
    Weight: 0.75 lbs.
    Shipping: Ships Worldwide
    Repair Guides
    Articles:
    Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
    May 27, 2015
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal