eReplacementParts.com
877-346-4814
Poulan Parts
Preferred Partners of
Repair Parts Home  Power Tool Parts  Poulan Parts  501628301 Clutch Drum

Clutch Drum

Part Number: 501628301
PoulanJonseredHusqvarnaWeed Eater
Availability: 25+ in stock
Price: $10.19
Ships within 1 business day

*This part replaces obsolete part #: 530057905.

Product Information
Manufacturer: Poulan, Jonsered, Husqvarna, Weed Eater
Product Number: 501628301
Classification: Part
Weight: 0.19 lbs.
Shipping: Ships Worldwide
Specifications
  • Includes bearing.
Description:
This is a genuine Poulan replacement part, it is sold individually.
The are two functions of the Clutch Drum Assembly

• It encases the clutch in the models shown below. When the engine gets up to a certain speed the clutch will engage the Drum Assembly and the chain will start to spin.

• The sprocket which is part of the Drum Assembly, is the part that drives the chain.
The 3/8 indicates the pitch of the chain that is needed for the saw.

For more information on chains. Go to the front page of our site, and click on Repair Center.

Frequently Purchased With
Compatibility

This part is compatible with the following machines:

Poulan
Jonsered
Husqvarna
Weed Eater
Expand the 141 compatible machines
Products Compatibility

This item works with the following types of products:

  • • Chain Saw
  • • Saw
Questions & Answers

Does this clutch drum part work with a Poulan pro PR4218 chain saw Chain number is 91PJ62DL
Gary for model number PR4218 asked on 2022-09-08
Hello Gary, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: 501628301. We hope this helps, good luck with this repair!
I have a poulon P4018WTchainsaw that the chain won't turn.I installed a new chain and guide bar but still won't turn.Without the guide bar on,i started the machine and disengaged the brake and the clutch sprocket turns no problem,but with the guidebar and chain attached, no go.Would the clutch be bad ?
Tom for model number P4018WT asked on 2022-09-07
Hi Tom, Thank you for your question. If your chainsaw will not turn, there are some parts that you will need to check to see which one is causing the issue. You will need to check the engine, the chain brake set, the clutch, the chain and the guide bar. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
Will this part fit my 4218 ?
Danny for model number Pr 4218 Poulan chain saw asked on 2022-03-07
Hello Danny, thank you for your question. Yes, the Number 501628301 you had chosen is compatible with your model. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
I purchased this Poulan in the early 1970's and need a spur sprocket for it. The factory part # is 530069301. The old sprocket appears to be about 2-3/4" O.D., six teeth. Do you have a sprocket that will fit my saw?
Neal for model number Poulan S25DA asked on 2022-02-15
Hello Neal, Thank you for the question. We are sorry, we looked up the part and it is listed as No Longer Available/Discontinued. There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers and contact us back with the updated substitution number. We hope this helps!
Repair Instructions: Submitted by Customers Like You
33 of 36 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Clutch Drum - 501628301
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set
Old clutch drum worn out.
Remove the clutch cover by removing two nuts. Remove e-ring and washer in front of the clutch drum. Remove old drum, do not lose the inside washer. Place new clutch drum on over the clutch. Install outside washer and e-ring, then attach the clutch cover. Done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
16 of 16 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Clutch Drum - 501628301
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Wrench Set
Chain drive sprocket welded to the clutch drum worn from use, binding chain
Remove two nuts holding chain cover, take chain off of bar, use small pick or screwdriver
to pry up horseshoe retainer clip on shaft outside of drive sprocket/clutch --take care as it
is spring metal. Pull off easily the sprocket/clutch drum, place new one and retainer on shaft.
Reinstall chain bar,chain and cover Done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
11 of 14 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Clutch Washer Kit - 530071945
Clutch Drum - 501628301
Clutch Assembly - 530057907
Washer-Large Clutch - 530016419
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, hammer and brass punch
Teeth on clutch drum worn and chain slipped and came off.
Removed, cover and chain.
Removed c-clip retaining clutch drum and removed the drum.
Removed clutch assembly (left-hand threads !) by tapping it with the hammer and brass punch.
Removed the large clutch washer and replaced it with the new washer and clutch assembly.
Lubed the clutch drum bearing and installed the drum.
Re-installed the c-clip.
Ready for a new chain and cover.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
6 of 6 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Clutch Drum - 501628301
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, putty knife
Old sprocket was grooved causing chain to not feed
Remove clutch cover. Remove c-clip. Slide off old drum assembly. Install new assembly and c-clip. Replace clutch cover. Piece of cake!!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 3 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Clutch Drum - 501628301
Clutch Assembly - 530057907
Air Filter - 530057869
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set, Wrench Set, Hammer
Clutch and clutch drum worn out
Loosen the tension on the blade. Remove the clutch cover. Then remove the bar and chain. Remove the e-ring and washer and the clutch drum. Now you have to lock up the engine for the removal of the clutch. To do this, remove the spark plug and place a length of rope into the cylinder, with some of the rope left out of the cylinder. Turn the clutch until the piston comes in contact with the rope and stops moving. With a screwdriver and hammer, strike the edge of the clutch in a clockwise motion until it is loose on the shaft. Remove the old clutch , then install the new clutch, tapping it with the hammer and screwdriver in a counterclockwise motion. Start replacing all of the parts that were removed from the saw ion reverse order. And don't forget about the spark plug. For the filter, simply remove the filter cover and remove the old filter and replace it with the new one, then replace the cover.









Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Bar Adjustment Kit - 530069611
Clutch Washer Kit - 530071945
Clutch Drum - 501628301
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Socket set
chain kept jumping off sprocket
1. I removed the bar by removing the 1/2 inch nuts holding the bar cover.
2. Using a screw-driver I removed the e-clip holding clutch washer, and removed the washer.
3. At this point, the clutch drum should pull off. Mine was quite sticky so I ended up using my channel-lock pliers to pull on the sprocket. I was replacing this anyway (sprocket is on clutch drum) so I wasn't worried about marring the sprocket.
4. Replaced the clutch drum. Placed a new clutch washer back on (old one was perfectly serviceable but decided if I was in there I would replace it). Put the new e-clip on - be careful here, it can go flying!
5. Since I had lost my bar adjust screw earlier I replaced it in the bar cover. Then I bolted down the bar cover.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Clutch Drum - 501628301
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Nutdriver, Snap ring pliers
Chain kept coming off bar.
Replaced clutch drum and chain. Problem solved.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Clutch Washer Kit - 530071945
Clutch Drum - 501628301
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers
Replaced chain drive gear and washer
Remove the clutch cover assembly. Then remove the c ring and washer. You now can remove the worn clutch drum. Replace all of the parts in reverse order. And you are done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Clutch Washer Kit - 530071945
Clutch Drum - 501628301
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers
Clutch drum worn
Removed chain cover
Popped off washer
Replaced clutch housing
Replaced washer
Replaced cover
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Clutch Washer Kit - 530071945
Clutch Drum - 501628301
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Clutch drum worn
Remove the clutch cover
Removed the c-clip and washer
Remove the worn clutch drum and installed the new one
Installed the new washes and the c-clip
Replaced the clutch cover
Adjusted the tension on the bar and chain
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4.8
Average Rating (out of 5):
51 Reviews
Click to filter by ratings:
5 stars
45
4 stars
5
3 stars
0
2 stars
0
1 stars
1
  • Highest Rating
  • Most Recent
< PREV
  • 1
  • 2
  • 3
NEXT >
  • Perfect replacement part
    Perfect replacement part and half the price at the dealer
    Guest - February 10, 2022 Verified Purchase
    Quick and Correct
    Once I identified the bad part on my chain saw, I went to the internet and immediately found a replacement part at a reasonable price at ereplacementparts. I ordered the part and received it in a timely manner. It fit perfectly and the saw is back in service. I was surprised the process was as easy and affordable as it was. Extremely pleased.
    Guest - February 9, 2022 Verified Purchase
    Fast shipping on my chain saw part, thanks
    Chain saw parts, just what I needed
    Guest - January 12, 2022 Verified Purchase
    Not very hard to replace this item
    Was the correct item for a fair price .
    Guest - December 9, 2021 Verified Purchase
    Perfect fit for my poulan pp4218avx
    Quick service & shipping
    Guest - October 28, 2021 Verified Purchase
    Works as it should
    I've ordered from here a few times now and I have yet to be disappointed parts always come quickly and have always been the right one
    Anonymous - October 22, 2021 Verified Purchase
    Easy
    Right part at a good price
    Guest - October 21, 2021 Verified Purchase
    Fast Service
    Received the ordered parts very quickly. The order was filled accurately and the parts fit perfectly.
    Guest - October 5, 2021 Verified Purchase
    hard to find, worked perfect
    perfect
    Guest - September 25, 2021 Verified Purchase
    Great Place
    Parts ae always there and arrive when they say. My goto place for my chainsaw parts Great Job
    Guest - September 14, 2021 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    • 2
    • 3
    NEXT >
    Product Information
    Manufacturer: Poulan, Jonsered, Husqvarna, Weed Eater
    Product Number: 501628301
    Classification: Part
    Weight: 0.19 lbs.
    Shipping: Ships Worldwide
    Repair Guides
    Watch the Repair Video for Clutch Drum
    Articles:
    Chain skipping? Replace the clutch drum on your Poulan chainsaw. Step-by-step instructions show you how....
    January 03, 2017

    Fixing things makes sense...

    ...And we make it easy! With our Fix app, you always have a personalized repair guide on-hand. Easily find manuals and replacement parts on your phone while you’re DIYing in the garage or garden.

    "Love the flexibility of the app to add everything in the home and garage. Access to manuals and parts right there makes it convenient."

    Available on the App Store Get it on Google Play
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal