eReplacementParts.com
877-346-4814
Poulan Parts
Repair Parts Home  Power Tool Parts  Poulan Parts  581562301 Chain (18-Inch)
photo thumbnailphoto thumbnail360 degree photo thumbnail
Chain (18-Inch)

Chain (18-Inch)

Part Number: 581562301
PoulanHusqvarna
Availability: Special Order [ more info ]
Price: $22.79
Leaves our warehouse within
4 - 10 business days.

*This part replaces obsolete part #: 952051338 and 952051548.

Product Information
Manufacturer: Poulan, Husqvarna
Product Number: 581562301
Classification: Part
Weight: 0.48 lbs.
Shipping: Ships Worldwide
Specifications
  • -18 inch
Description:
This genuine OEM supplied replacement part is specially made for use with Poulan chainsaws. It is the rotating chain that runs along a guide bar to cut the material. Unfortunately, over time the it may become dull and will need to be replaced or sharpened to maintain best cutting results. Please make sure to refer to the owners manual of your model for the correct application of this component. Keep in mind this high-quality chain is made of durable metal and is sold individually.

NOTE: Here is the link to our article on How to Remove and Install a Chainsaw Chain
Compatibility

This part is compatible with the following machines:

Poulan
2050 Type 1 Gas Chain Saw
2050 Type 1 Gas Chain Saw
2050 Type 2 Gas Chain Saw
2050 Type 2 Gas Chain Saw
2050 Type 3 Gas Chain Saw
2050 Type 3 Gas Chain Saw
2050 Type 4 Gas Chain Saw
2050 Type 4 Gas Chain Saw
2050 Type 5 Gas Chain Saw
2050 Type 5 Gas Chain Saw
2050 Type 6 Gas Chain Saw
2050 Type 6 Gas Chain Saw
2050 Type 7 Gas Chain Saw
2050 Type 7 Gas Chain Saw
2075 Type 1 Gas Chain Saw
2075 Type 1 Gas Chain Saw
2075 Type 2 Gas Chain Saw
2075 Type 2 Gas Chain Saw
2075 Type 3 Gas Chain Saw
2075 Type 3 Gas Chain Saw
2075 Type 4 Gas Chain Saw
2075 Type 4 Gas Chain Saw
2075 Type 5 Gas Chain Saw
2075 Type 5 Gas Chain Saw
2075C Type 1 Gas Chain Saw
2075C Type 1 Gas Chain Saw
2075C Type 2 Gas Chain Saw
2075C Type 2 Gas Chain Saw
2075C Type 3 Gas Chain Saw
2075C Type 3 Gas Chain Saw
2075C Type 4 Gas Chain Saw
2075C Type 4 Gas Chain Saw
2075C Type 5 Gas Chain Saw
2075C Type 5 Gas Chain Saw
2075OC Type 1 Gas Chain Saw
2075OC Type 1 Gas Chain Saw
2075OC Type 2 Gas Chain Saw
2075OC Type 2 Gas Chain Saw
2075OC Type 3 Gas Chain Saw
2075OC Type 3 Gas Chain Saw
2075OC Type 4 Gas Chain Saw
2075OC Type 4 Gas Chain Saw
2075OC Type 5 Gas Chain Saw
2075OC Type 5 Gas Chain Saw
2100 Gas Chain Saw
2100 Gas Chain Saw
2150 Type 1 Gas Chain Saw
2150 Type 1 Gas Chain Saw
2150 Type 2 Gas Chain Saw
2150 Type 2 Gas Chain Saw
2150 Type 3 Gas Chain Saw
2150 Type 3 Gas Chain Saw
2150 Type 4 Gas Chain Saw
2150 Type 4 Gas Chain Saw
2150 Type 5 Gas Chain Saw
2150 Type 5 Gas Chain Saw
2150 Type 6 Gas Chain Saw
2150 Type 6 Gas Chain Saw
2150 Type 7 Gas Chain Saw
2150 Type 7 Gas Chain Saw
2155 Type 1 Gas Chain Saw
2155 Type 1 Gas Chain Saw
2155 Type 2 Gas Chain Saw
2155 Type 2 Gas Chain Saw
2155 Type 3 Gas Chain Saw
2155 Type 3 Gas Chain Saw
2155 Type 4 Gas Chain Saw
2155 Type 4 Gas Chain Saw
2155 Type 5 Gas Chain Saw
2155 Type 5 Gas Chain Saw
2175 Type 1 Gas Chain Saw
2175 Type 1 Gas Chain Saw
2175 Type 2 Gas Chain Saw
2175 Type 2 Gas Chain Saw
2175 Type 3 Gas Chain Saw
2175 Type 3 Gas Chain Saw
2175 Type 4 Gas Chain Saw
2175 Type 4 Gas Chain Saw
2175 Type 5 Gas Chain Saw
2175 Type 5 Gas Chain Saw
2175 Type 6 Gas Chain Saw
2175 Type 6 Gas Chain Saw
2175 Type 7 Gas Chain Saw
2175 Type 7 Gas Chain Saw
2175 Gas Chain Saw
2175 Gas Chain Saw
2200 Gas Chain Saw
2200 Gas Chain Saw
2250 Type 1 Gas Chain Saw
2250 Type 1 Gas Chain Saw
2250 Type 2 Gas Chain Saw
2250 Type 2 Gas Chain Saw
2250 Type 3 Gas Chain Saw
2250 Type 3 Gas Chain Saw
2250 Type 4 Gas Chain Saw
2250 Type 4 Gas Chain Saw
2250 Type 5 Gas Chain Saw
2250 Type 5 Gas Chain Saw
2250 Type 6 Gas Chain Saw
2250 Type 6 Gas Chain Saw
2250 Type 7 Gas Chain Saw
2250 Type 7 Gas Chain Saw
2250LE Type 1 Gas Chain Saw
2250LE Type 1 Gas Chain Saw
2250LE Type 2 Gas Chain Saw
2250LE Type 2 Gas Chain Saw
2350 Gas Chain Saw
2350 Gas Chain Saw
2375 Type 1 Gas Chain Saw
2375 Type 1 Gas Chain Saw
2375 Type 2 Gas Chain Saw
2375 Type 2 Gas Chain Saw
2375 Type 3 Gas Chain Saw
2375 Type 3 Gas Chain Saw
2375 Type 4 Gas Chain Saw
2375 Type 4 Gas Chain Saw
2375 Type 5 Gas Chain Saw
2375 Type 5 Gas Chain Saw
2375 Type 6 Gas Chain Saw
2375 Type 6 Gas Chain Saw
2375 Type 7 Gas Chain Saw
2375 Type 7 Gas Chain Saw
2375LE Type 1 Gas Chain Saw
2375LE Type 1 Gas Chain Saw
2375LE Type 2 Gas Chain Saw
2375LE Type 2 Gas Chain Saw
2400 Gas Chain Saw
2400 Gas Chain Saw
2750 Gas Chain Saw
2750 Gas Chain Saw
3050 Gas Chain Saw
3050 Gas Chain Saw
P3818AV Type 1 Gas Chain Saw
P3818AV Type 1 Gas Chain Saw
P3818AV Type 2 Gas Chain Saw
P3818AV Type 2 Gas Chain Saw
P4018 Gas Chain Saw
P4018 Gas Chain Saw
P4018AV Type 1 Gas Chain Saw
P4018AV Type 1 Gas Chain Saw
P4018AV Type 2 Gas Chain Saw
P4018AV Type 2 Gas Chain Saw
P4018AV-BH Type 1 Gas Chain Saw
P4018AV-BH Type 1 Gas Chain Saw
P4018AV-BH Type 2 Gas Chain Saw
P4018AV-BH Type 2 Gas Chain Saw
P4018WM Type 1 Gas Chain Saw
P4018WM Type 1 Gas Chain Saw
P4018WM Type 2 Gas Chain Saw
P4018WM Type 2 Gas Chain Saw
Expand the 150+ compatible machines
Products Compatibility

This item works with the following types of products:

  • • Chain Saw
  • • Saw
Questions & Answers

I bought at Lowe's the Control Cut Blade. It was manufactured from Oregon H72 18", but the teeth of the chain are thicker that what I have on. I want to order another chain saw blade, but you have difference letters after the 218A. Please advise. Thank you!
Frank for model number PP4218A
Hello Frank and thanks for writing. Part Number: 581562301 is in the list of compatible items for your model. Hope this helps . Please contact us anytime.We have checked if there is a difference between the models and for the chain it is a crossover it fits both models. Hope this helps. Contact us anytime.
I need to replace the old chain part #952051481. which one should I get?
Joe for model number pp4218
Hello Joe, thank you for your inquiry! For your model PP4218, the correct replacement chain is part number 581562301. I hope this information helps!
Will this part fit my chainsaw, my old part has 62 links
Bruce for model number P4018WT
Hello Bruce, thank you for your inquiry! We can confirm that chain 581562301 is compatible with your model P4018WT. I hope this information helps!
18" 42cm. Chainsaw chain. Part # 72-3619 it is no longer made. Could you send me a replacement number for it. Thank You. Rufino
Rufino for model number Craftsman 72-3619
Hello Rufino, thank you for your inquiry. The part you are requesting has been discontinued, and we have no known replacement listed in our system. We have no further information. You may wish to contact the manufacturer for further information. We are sorry for any inconvenience this may cause you.
Repair Instructions: Submitted by Customers Like You
10 of 11 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Chain (18-Inch) - 581562301
Fuel Cap Assembly - 580940901
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Socket set, leather gloves
Replaced chain
With sprocket wrench,take off nuts and sprocket cover. Loosen the tension screw a few turns. Put on gloves and remove bar and chain. Fit new chain into bar slot and slide chain over the clutch and down around the drive gear, as you fit the bar back over the two holding bolts. Check to be sure the chain is on the gear and in the bar slot as you pull it tight. Then, holding it in place, put the cover back on over the bolts, If it doesn't fit the tension nut into the hole in the bar, you may need to turn the screw with fingers to get it so the tensioner fits in and the cover goes on evenly and snugly, BEFORE you put on the nuts and tighten it down loosely. Check to see if it is in by using a screwdriver to tighten it. It won't tighten if the L-nut isn't in the bar. Once that works, you may tighten the cover down, but not too tight. Many knuckles have suffered from a slipped wrench on an overtightened cover. Good luck.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 5 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Chain (18-Inch) - 581562301
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Wrench Set
Replaced chain/blade on chain saw
I removed the chain cover on the side of saw with a wrench. Removed the old blade. Fit the new chain on guide. Replaced cover loosely.
Tightened the tension. Secured the cover by tightening the screws. Was ready to go! Quick and easy. I highly recommend ordering replacement parts that are specified for your brand of tool. After trying 2 'generic' chain saw blades from non Poulan dealer that were 'supposed' to fit my Poulan Chain Saw but didn't. I found eReplacementParts.com and ordered the specific brand using the model number. Was the exact perfect part!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Chain (18-Inch) - 581562301
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Socket set
Only needed to replace the chain saw blade.
Removed the old blade, cleaned the bar and the chain guide parts. Replaced with the new blade.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Parts Used:
Chain (18-Inch) - 581562301
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Adjustable Wrench
Chain stretched
Loosened old chain, installed new chain from your company.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Parts Used:
Chain (18-Inch) - 581562301
Accy-18" Bar - 952044689
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, No tools required
Removed old bar and chain and replaced new bar and chain
Very easy repair as no tools are required to do this repair j
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Parts Used:
Chain (18-Inch) - 581562301
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Socket set
Needed a new chain
Removed old chain and bar
replaced with new chain and aligned ti to chain saw.
works great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Parts Used:
Chain (18-Inch) - 581562301
Clutch Drum - 501628301
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Wrench Set
Chain sprocket/clutch was damaged from wrong chain previously installed
1 Removed cover.
2 Removed chain/bar
3 Removed e-ring
4 Removed clutch/sprocket
5 Installed new clutch/sprocket
6 Installed e-ring
7 Installed new(correct) chain/bar
8 Adjusted chain tension
9 Started saw and got cutting
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Parts Used:
Chain (18-Inch) - 581562301
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Wrench Set
Dull chain . Replaced with new one . Perfect fit
Replaced the old chain with the new one
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Parts Used:
Spark Plug - 952030150
Chain (18-Inch) - 581562301
Cover-Clutch - 530058934
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Socket set
Cover was cracked and chain needed sharping but needed new chain,plug
Removed the cracked cover and the old chain and the old plug. Installed the new plug, and chain, then installed the new cover

Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Parts Used:
Chain (18-Inch) - 581562301
Clutch Washer Kit - 530071945
Clutch Drum - 501628301
Accy-18" Bar - 952044689
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers
Replaced chain, bar & clutch/sprocket on chainsaw
Removed clutch housing from chainsaw. Removed chainsaw chain and bar. Removed c-clip from clutch shaft and slid clutch/sprocket from shaft. Assembled the new parts onto chainsaw in reverse order, placed clutch housing onto saw and adjusted chain. Started saw and went to work. Very easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4.8
Average Rating (out of 5):
5 Reviews
Click to filter by ratings:
5 stars
4
4 stars
1
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Great company
    I am pleased with the product and fast shipping
    Guest - February 8, 2020 Verified Purchase
    Great job.
    Agent knew very quick what I needed and shipped it to me immediately.
    Guest - December 11, 2019 Verified Purchase
    Poulan chainsaw replacement chain
    Easy order - fast delivery - replacement chain fit perfectly - will do business again
    Guest - October 5, 2019 Verified Purchase
    a genuine factory replacement part
    The part arrived in a few days and the chain saw now works like brand new. I will use eReplacementParts when making repairs on other applicable items.
    Guest - July 1, 2019 Verified Purchase
    Worked for the Job.
    Fit as expected. Did great for a small yard job.
    Guest - September 18, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Poulan, Husqvarna
    Product Number: 581562301
    Classification: Part
    Weight: 0.48 lbs.
    Shipping: Ships Worldwide
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal

    fancyboxy