Watch The
Repair Video

Carbon Brush Set

Part Number: 999038

16 Reviews

Ships within 1 business day

Questions & Answers

Repair Instructions

Product Information

Manufacturer: Metabo HPT (Hitachi)

Product Number: 999038

Classification: Part

Weight: 0.01 lbs.

Also Known As: Motor Brush Set

Shipping: Ships Worldwide

Description:

Set of 2 Carbon Brushes with wire leads and brush springs attached. The set contains genuine Hitachi replacement parts, and comes packaged in a Hitachi retail box. rnThis brush set will fit the Hitachi tools listed at the bottom of the page.rnrnrn

• Worn brushes frequently are the cause behind a motor running poorly.
• Replacing brushes can fix a motor that’s operating intermittently.
• New brushes can restore a motor’s electric braking.

Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

Warning: California's Proposition 65

Frequently Purchased With

Carbon Brush S..
$6.03

Brush Cap
$2.99

Ball Bearing
$8.36

Ball Bearing 6..
$9.07

Switching Powe..
$34.69

Brush Holder
$8.12

Ball Bearing
$12.98

Sleeve
$5.99

Compatibility

This part is compatible with the following machines:

Metabo HPT (Hitachi)

Expand the 80 compatible machines

Products Compatibility

This item works with the following types of products:

• Circular Saw
• Grinder
• Miter Saw
• Planer
• Router
• Sander
• Saw

Expand List

Questions & Answers

Sort by

Have C12RSH2 12inch miter saw - how do I know when my brushs need need replacing?

John for model number C12RSH2 asked on 2022-11-11

Hello John, Thank you for the question. If you look at the brushes you will see wear or damage. Also the unit may not run properly or start or stay running. We hope this helps, good luck with this repair!

Did this question help you?

Repair Instructions: Submitted by Customers Like You

6 of 6 people found this instruction helpful

Tool Type:

Miter Saw

Parts Used:

Carbon Brush Set - 999038

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Worn brushes

Remove the brush caps from each side of the motor housing. Remove worn brushes, then insert new brushes. Replace the brush caps, your done.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 2 people found this instruction helpful

Tool Type:

Circular Saw

Parts Used:

Carbon Brush Set - 999038

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Saw seemed to have lost power

There is a screw cap on each side of the saw, easily removed with a flat head screwdriver. I removed each cap and removed each brush. I installed the new brushes and the saw works great.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Circular Saw

Parts Used:

Carbon Brush Set - 999038

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Pliers

Saw would start but not keep running.

Pulled the old brushes out and put in the new ones.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Miter Saw

Parts Used:

Carbon Brush Set - 999038

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Brushes were bad

Unscrewed the cap, took the old brush out. Put the new brush in and put the cap back on.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Miter Saw

Parts Used:

Carbon Brush Set - 999038

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Brushes worn

With a straight screwdriver remove the black brush caps. The remove the worn brushes from the brush holders. Blow out the motor with compressed air. Install the new brushes and replace the brush caps.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Miter Saw

Parts Used:

Carbon Brush Set - 999038

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Brushes arcing

Removed caps and old brushes, inserted new brushes and replaced caps.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Circular Saw

Parts Used:

Carbon Brush Set - 999038

Brush Cap - 945161

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Brush and cap were missing.

Removed the remaining brush cap
Installed the new brushes
Installed the brush caps

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Circular Saw

Parts Used:

Carbon Brush Set - 999038

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Needed brushes

Removed the brush caps with a screwdriver
Removed the old brushes
Installed the new brushes
Screwed the brush caps back on

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Miter Saw

Parts Used:

Carbon Brush Set - 999038

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Needle nose pliers

Worn brushes

Removed the cover to the brushes cover pulled them out and put in the new ones then replaced the covers it was that easy.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Miter Saw

Parts Used:

Carbon Brush Set - 999038

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Not running consistently

Unplug the tool. Remove the caps holding old carbon brushes. Remove old ones and replace with new ones. Replace the caps.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

16 Reviews

Click to filter by ratings:

5 stars

4 stars

3 stars

2 stars

1 stars

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Easy repair. Fast and accurate order.

Easy repair. Fit perfect

Guest - January 21, 2023 Verified Purchase

Great parts

Thank for having hard to find parts

Anonymous - June 11, 2022 Verified Purchase

Good

Good condition and come litle long time

Guest - July 19, 2021 Verified Purchase

fast ship

fast ship & the parts eorke just fine, thanks.

craig - November 17, 2020 Verified Purchase

Fast delivery. Trouble shooting guide was spot on.

Genuine Hitachi parts. Saw is back in service; like new.

Guest - February 25, 2020 Verified Purchase

Perfect Fit

Fit perfect one screw to remove for each side (simple repair) a litle slow delivery excellent reair parts

Guest - November 22, 2019 Verified Purchase

Great part

The parts came quickly and fit just like the original ones. Thank you! Will de ordering more parts from them in the future when needed!

Guest - November 4, 2019 Verified Purchase

This was an easy repair to do.

The brush set came quickly and fit just right!

Guest - September 27, 2019 Verified Purchase

good part

saw is running as good as ever

Guest - September 20, 2019 Verified Purchase

Easy to replace, however, the real problem was the switch. I replaced it too and the router worked fine.

The parts were excellent. My Hitachi TR12 router would not start. Brushes were indicated as the likely problem. I replaced them easily but the router still would not start. I ordered a new switch and replaced the old one and the router started as designed. Thanks.

Guest - August 15, 2019 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Product Information

Manufacturer: Metabo HPT (Hitachi)

Product Number: 999038

Classification: Part

Weight: 0.01 lbs.

Also Known As: Motor Brush Set

Shipping: Ships Worldwide