Easy
Less than 15 minutes
Genuine manufacturer approved replacement switch used on Hitachi compound miter saws. It is the part of the tool handling on/off operations. Since switches have moving mechanical parts, they will eventually wear out and will require a replacement. Switch has a plastic body and it is sold individually.
To replace this switch you would need a screwdriver.
• Remove screws used to hold two pieces of housing set together
• Disconnect wires from the old switch and remove it from the housing
• Place the new switch in the housing and connect wires to it
• Reassemble the housing
Switch 326699
OEM part for: Metabo HPT (Hitachi)
Part Number: 326699
$17.06
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Jump To:
Product Description ?
- 3P Faston Type. Without Lock.
- Classification: Part
- Weight: 0.03 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 5 machines
Metabo HPT (Hitachi)
C10FCE2 10" Compound Miter Saw View Diagrams & Manuals
C10FCH2 10" Laser Compound Miter Saw View Diagrams & Manuals
C10FCGSM 10 Inch Single Bevel Miter Saw 15 Amp 5000 Rpm Motor W Carrying Handle View Diagrams & Manuals
C10FCH2SM 10 Inch Compound Miter Saw With Laser Marker View Diagrams & Manuals
C10FCHE2 View Diagrams & Manuals
This item works with the following types of products:
- Miter Saw Parts
- Saw Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
6
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Amazingly simple repair!
I am extremely pleased with the part that I received from your company. It was a perfect match. Moderately priced and arrived very quickly. I was only without my miter saw for less than a week.
Guest -
March 7, 2024
Verified Purchase
compound miter saw malfunctioning
My compound miter saw was recently not functioning. I diagnosed my unit carefully. Electric was getting to the unit but the trigger switch was 'bad'. I called a local repair shop. Their repair back log was over 4 weeks. I went on-line for options. My search lead me to eReplacement. I contacted customer service. The switch I needed was in stock. The item was shipped same day. Within the week, the replacement switch was delivered. The install was effortless. My unit is now back in service. A TOTALLY Awesome experience. Great customer service. Prompt service. Great customer service using email notifications. John B (Victor NY)
JOHN -
April 28, 2022
Verified Purchase
Fast Delivery
This are always reasonably prices and fast shipping, saves a lot of wasted time trying to find a part locally, only to have to wait while they order it any way. Probably from here.
Gary -
February 23, 2022
Verified Purchase
Easy to repair
The was in great condtion.
Anonymous -
December 22, 2021
Verified Purchase
Replacement same as original
Arrived in 3 days went on in minutes, my saw is like new again. Thank you.
Guest -
September 16, 2019
Verified Purchase
Fast, precise, as advertised
The trigger switch was exactly what I needed to fix my miter saw. Fast delivery.
Guest -
June 3, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Switch
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Saw was stuck in the on position
David - November 27, 2016
👍 3 of 3 people found this instruction helpful
Tool Type
Miter Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Switch is built into the handle. Remove 6 screws with Phillips screwdriver, handle then becomes two pieces, and you are there. Remove three wires with needle nose pliers. Remove old switch. Install wires on new switch. Install new switch in previous location. Put handle back together, install and tighten 6 screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Switch on Hitachi miter saw failed. It would not shut off the saw, leading to a dangerous condition.
James - November 5, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Miter Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Removed the old switch - detached the wires. Hooked the new switch to the old wires (fortunately, I did this one wire at a time since there were no wiring instructions with the switch and it was not obvious which wire went where.) Reassembled the handle. The new switch is working well.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Contacts burnrt in switch
Stephen - December 25, 2023
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed switch cover and switch, replaced switch, which was a perfect match. Saw is good as new. Part came in two days.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
saw would not turn off
Katherine - July 29, 2021
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers
Parts Used
changed the switch
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broken trigger/ switch leading saw running intermittently or not at all.
Oystein - August 19, 2020
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Opened handle compartment where trigger/ switch was located
Unplugged defective switch
Marked wires
Plugged in new switch module
Replaced cover
Done.
Nose-pliers helpful in bending tabs when removing old module.
For me, marking wires was essential to make sure new module was correctly rewired.
Unplugged defective switch
Marked wires
Plugged in new switch module
Replaced cover
Done.
Nose-pliers helpful in bending tabs when removing old module.
For me, marking wires was essential to make sure new module was correctly rewired.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Saw suddenly stopped turning on
Eric - February 6, 2019
Tool Type
Miter Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
First had to determine if it was the switch, so I shorted the proper leads according to the schematic on the switch. Then I ordered the switch and it popped right in. Super easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Saw would not cut off.
Michael - March 17, 2018
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Disassembled handle. Removed switch. Took switch apart. Found shorted terminals. Replaced switch.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Switch not working
thomas - December 15, 2017
Tool Type
Miter Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Removed the 8 screws on the switch cover, lifted out the old switch removed and installed each wire 1 at a time ( 1 for 1) on to the new switch. reinstalled the new switch and replaced the switch cover and screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Miter saw ran continously on/off switch stopped working
John - August 18, 2017
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Removed 2 screws that secured switch to handle. Disconnected wiring, rewired, and re-secured with two screws. Worked perfectly. Saved buying a new compound miter saw. Thanks.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Switch had burnt out
Frank - February 12, 2017
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
1 Remove the switch cover
2 Remove
3 Color coded wires from old switch and place on new switch
4 Replace switch cover
2 Remove
3 Color coded wires from old switch and place on new switch
4 Replace switch cover
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
