866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Power Tool Parts  Hitachi Parts  999-044 Carbon Brush Set

Carbon Brush Set

Part Number: 999-044
Hitachi
Availability: 25+ in stock
Price: $5.39
Quantity:
Ships within 1 business day
Description:
Set of 2 Carbon Brushes with wire leads and brush springs attached. The set contains genuine Hitachi replacement parts, and comes packaged in a Hitachi retail box. rnThis brush set will fit the Hitachi tools listed at the bottom of the page.

• Worn brushes frequently are the cause behind a motor running poorly.
• Replacing brushes can fix a motor that’s operating intermittently.
• New brushes can restore a motor’s electric braking.


Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

Product Information
Manufacturer: Hitachi
Product Number: 999-044
Classification: Part
Weight: 0.04 lbs.
Also Known As: Motor Brush Set
Shipping: Ships Worldwide
Products Compatibility

This item works with the following types of products:

  • • Band Saw
  • • Chop Saw
  • • Circular Saw
  • • Demolition Hammer
  • • Grinder
  • • Jointer
  • • Miter Saw
  • • Planer
  • • Rotary Hammer
  • • Router
  • • Saw
  • • Table Saw
Expand List
Questions & Answers

Are these brushes comparable with Hitachi sliding mitre saw C12LSH
Robert for model number C12LSH
Hello Robert, thank you for your inquiry! Carbon brush set 999-044 is not compatible with model C12LSH. However, we have located the correct brush set and it is part number 999-038. I hope this information helps!
Repair Instructions: Submitted by Customers Like You
6 of 6 people found this instruction helpful
Tool Type:
Table Saw
Parts Used:
Carbon Brush Set - 999-044
Rocker Switch - 726811
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Bad switch, needed brushes
I pressed on the tabs on the top and bottom of the bad switch to release it from the housing. I removed one lead at a time from the old switch to the new switch then pressed the switch back into the housing. To replace the brushes I removed the brush caps with a screwdriver, then remove the old brushes and inserted the new ones. I then screwed the brush caps back on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Miter Saw
Parts Used:
Carbon Brush Set - 999-044
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Brake was not working
With a screwdriver, carefully remove the brush caps from the motor housing. Then remove the old brushes from the brush holder. If you have compressed air, now is a good time to clean out that area of the motor. Then insert the new brushes back into the holders and screw the brush caps back on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Miter Saw
Parts Used:
Carbon Brush Set - 999-044
Brush Cap - 978-445
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Bought saw at garage sale as is with missing parts
I put in new brushes and screwed the caps on. Saw works great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Carbon Brush Set - 999-044
Lock Off Button - 951895
Dust Bag - 373958
Switch W/Lock (Lock Button Part Number 951-895 Sold Seperately) - 988-925
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
No power to the Miter Saw
1. Clean the tool
2. remove and replace the brushes, and switch parts
3. Test and operate

25 year old saw is now good as new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Demolition Hammer
Parts Used:
Carbon Brush Set - 999-044
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Carbon brush broke in two
replaced carbon brush set
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Router
Parts Used:
Carbon Brush Set - 999-044
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Motor started arcing
Removed the brush caps
Removed the old brushes
Installed the new brushes
Installed the brush caps
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Carbon Brush Set - 999-044
Brush Cap - 978-445
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Bad brushes.
Removed the brush caps with a screwdriver
Removed the old brushes
Put in the new brushes
Screwed the new brush caps on
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Carbon Brush Set - 999-044
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Motor wouldn't spin, brushes worn.
With a screwdriver removed the brush caps
Removed the old worn brushes
Install the new brushes
Screw the brush cap back on
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Demolition Hammer
Parts Used:
Carbon Brush Set - 999-044
Cap Cover - 956-972
Machine Screw (Wisp. Washer) M4X12 - 951-039
Brush Cap - 940-540
Cap Rubber - 944-960
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Demolition electric sledgehammer was not working.
I checked the carbon brushes and noticed that they were severely worn. The repair was simple and easy.

Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Demolition Hammer
Parts Used:
Carbon Brush Set - 999-044
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers, Allen keys / flat head screwdriver
The brush were worn on one side of jackhammer
I had to buy allen keys to take the side plates of where the carbon brushes are. Only one was worn out badly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5
Average Rating (out of 5):
3 Reviews
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Part was exactly what I needed; installed easily; great price.
    Received the Carbon Brush Set in a few days and had it installed the same day. Parts were exactly what I needed. Table saw now works like new.
    Guest - 6 days ago Verified Purchase
    Looked like the OEM part
    Fast delivery,and just what I wanted
    Guest - 24 days ago Verified Purchase
    Perfect. Brand new, quick shipping
    Router runs like new
    Guest - May 17, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    visa mastercard discover american express PayPal
    HACKER SAFE certified sites prevent over 99.9% of hacker crime.

    fancyboxy