Medium
30-60 minutes
This is an OEM replacement part, sold individually.
This Grommet is an elbow for the crankcase breather tube. These rubber elbows were just a convenient way to make a 90 degree bend back when they used metal tubing.
Compatible with the equipment shown below.
Grommet 692189
OEM part for: Briggs and Stratton, Toro
Part Number: 692189
$5.34
In Stock
Order within the next 1 hour and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Grommet will fit the following 13960 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Briggs and Stratton
Toro
Show More Compatible ModelsThis item works with the following types of products:
- Engine Parts
- Generator Parts
- Blower Parts
- Vacuum Parts
- Lawn Mower Parts
- Lawn Tractor Parts
This part replaces obsolete part #: 67838
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
13
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
- 2
Worked as expected.
Got the parts in a timely manner. Worked fine.
Anonymous -
June 11, 2022
Verified Purchase
Part was just what I needed
Fast service, fast shipping, thanks.
Guest -
August 9, 2021
Verified Purchase
Exactly the right part.
The part was a perfect fit.
Guest -
July 13, 2021
Verified Purchase
Parts I needed + more
Ordered with carb rebuild kit. All parts I needed to rebuild carb plus many extra parts to fit variations of that model carb. Repaired carb and motor runs better than new.
Guest -
February 3, 2021
Verified Purchase
Perfect fit
It’s as good as the factory part
Guest -
July 17, 2020
Verified Purchase
Easy repair
Great part arrived sooner than I expected!! Works great 👍
Guest -
July 13, 2020
Verified Purchase
Great Parts
Thank you for fast shipment parts fit great.
karl -
July 11, 2020
Verified Purchase
It's the little parts
Needed the parts to make it correct, perfect fit, arrived quick, made the job professional.
William -
June 15, 2020
Verified Purchase
carburetor rebuild
Had a very good experience with purchasing my part. I spoke with Mary on the initial call but realized I needed further assistance and parts to be ordered. I do not remember the names of the other two who helped me with my order but considering the order took many weeks to arrive it was one of the best experiences I’ve have ordering something. My order was placed in the early days of the pandemic so it was understandable when stocking and shipping were disrupted. The experience was made by the staff working the phones while placing the order. The ladies I spoke with were proficient, professional and personable. Thank you.
Guest -
June 5, 2020
Verified Purchase
Factory part for an old machine
Purchased an older aerator with a Briggs engine on it - The engine needed a tune up along with this vacum grommet.
E-replacement parts is my go-to source for my machines. Convenient ordering, competitive pricing and they even have tutorials and suggestions for your household appliance needs.
Scott -
October 4, 2019
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Grommet
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Engine wouldn't start because the rubber connectors were cracked
steve - June 6, 2016
👍 5 of 5 people found this instruction helpful
Tool Type
Engine
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set
Remove the breather tube, and both grommets from the breather assembly. Remove the old grommets and installed the new grommets. Remove the air cleaner cover and remove the old pre filter and install the new on, then place the cover back on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Very bad engine misfire, could not be corrected with needle valve adjustment or carb cleaning
Richard - September 21, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Lawn Mower
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Socket set
1. Removed carburetor and separated top from bottom
2. Saw very slight wrinkle close to spring on fuel pump
3. Replaced membrane, pump spring and breather grommet. Likely only the membrane was worn.
4. Reinstalled carburetor and engine started right up and ran like new!
2. Saw very slight wrinkle close to spring on fuel pump
3. Replaced membrane, pump spring and breather grommet. Likely only the membrane was worn.
4. Reinstalled carburetor and engine started right up and ran like new!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Abandoned mower, missing a wheel, sitting at the curb waiting to go to the junk yard
Lee - May 22, 2022
Tool Type
Lawn Mower
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set
I wanted a project. The previous owner said i could have it and it may need a starter? It's a pull start.
Step 1 Power wash and engine degreaser.
Step 2 Inspect for oil - it was almost dry. Checked for spark - good. Air filter has never been changed. Primer bulb shot. Got it to start eventually - stable enough.
Step 3 Tore down the engine cover and carburetor enough to figure only that the only service this thing has seen is gasoline. Ordered the above parts.
Step 4 Cleaned out the carburetor and the top end of the engine. Sharpened the blade and made sure the whole mower was structurally sound.
Step 5 Replaced the parts that were ordered including the missing wheel assembly. Changed the oil, fresh gas, Three primes of the primer bulb. the machine came to life on the 1st pull.
I have mowed my grass three times so far, runs great. Selling it to a friend who needs a cheap mower
Step 1 Power wash and engine degreaser.
Step 2 Inspect for oil - it was almost dry. Checked for spark - good. Air filter has never been changed. Primer bulb shot. Got it to start eventually - stable enough.
Step 3 Tore down the engine cover and carburetor enough to figure only that the only service this thing has seen is gasoline. Ordered the above parts.
Step 4 Cleaned out the carburetor and the top end of the engine. Sharpened the blade and made sure the whole mower was structurally sound.
Step 5 Replaced the parts that were ordered including the missing wheel assembly. Changed the oil, fresh gas, Three primes of the primer bulb. the machine came to life on the 1st pull.
I have mowed my grass three times so far, runs great. Selling it to a friend who needs a cheap mower
Did you find this story helpful?
Thanks for voting and helping fellow customers!
carb
Richard - May 8, 2021
Tool Type
Engine
Difficulty
Hard
Time
More than 2 hours
Tools Used
Screwdriver, Socket set, Torx
Parts Used
Ordered carburetor for a 25 yo Pollen Garden teller w/Brigs 5 hp engine. Two screw holes had to be opened up with tap. Ordered later two grommets that were needed to replace the old parts. Most difficult to replace this carb. on this engine. When done Just two pulls and purring like a kitten. Good carb.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Machine ran bad
Kenneth - August 19, 2020
Tool Type
Engine
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Pliers
Parts Used
Replaced parts
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Piston honing
Gary - January 15, 2020
Tool Type
Engine
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Socket set, Wrench Set, Piston locked up and piston wall was scored
1 tour it apart everything
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tiller not runing
Richard - October 10, 2019
Tool Type
Engine
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set
Replaced parts as listed. Runs great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Na
Jeff - September 3, 2019
Tool Type
Engine
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Socket set, Wrench Set, Nutdriver, Not really a tool but compressed air and carb cleaner.
Too off air breather to get to carb. Unbolted gas tank and carb. Used tools to take apart carb. Scraped old gaskets off carb. Used carb cleaner spray and compressed air to spray our all holes and cleaned carb. Put new gaskets on then fired right up. Will deff use in the future for parts etc.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Go kart wouldn't stay running
steven - June 28, 2019
Tool Type
Engine
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Socket set
Removed carb and installed new diaphragms and gaskets
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Carburetors vacuum pump gasket was bad
Bradford - June 11, 2018
Tool Type
Engine
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers, Socket set
Parts Used
Removed panel for vacuum pump gasket and replaced. ALso replaced rotted elbow for PVC connection into carburetor.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
