Genuine OEM replacement part used on a variety of Engines. This part provides an air tight seal for mounting the Gas Tank. This Gasket is made out of Composite Material and it is Sold Individually. Over time Gaskets tend to dry out and become brittle allowing for leaks. This would be a good time to replace it.
Requires a Torx Screwdriver to remove the screw that secures the Fuel Tank.
Gasket-fuel Tank 692241
OEM part for: Briggs and Stratton, Toro, Craftsman
Part Number: 692241
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 1564 machines
Briggs and Stratton
Toro
Craftsman
This item works with the following types of products:
- Engine Parts
- Generator Parts
- Blower Parts
- Vacuum Parts
- Chain Saw Parts
- Saw Parts
This part replaces obsolete part #: 530019102, 530-019102, 272489
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Gasket-fuel Tank
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Rough Running
Tool Type
Engine
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set, Wrench Set
2. Soaked carburetor in Super Clean
3. Used small copper wire to rod out all jets, non-removable main jet and removable jet on side
4. Flushed gas tank
4. Reassembled carburetor with new pump and gasket
Engine would not start, no fuel, lose of compression
Tool Type
Engine
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Socket set, Wrench Set, Nutdriver, torx bits
2. Remove diaphragm pump, spring, needle and spring.
3. Reinstall parts.
4. Reinstall carburetor to machine.
5. Pull head.
6. Clean fuel valve.
7. Reinstall head.
8. Cleanup.
9. Start machine.
Guel tank rusted out.
Tool Type
Engine
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Nutdriver, None
Parts Used
gas tank and carburetor gum up
Tool Type
Engine
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Carburetor old and clogged
Tool Type
Engine
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Star bit
Fuel was left in the tank.
Tool Type
Engine
Difficulty
Medium
Time
More than 2 hours
Tools Used
Wrench Set, Nutdriver, Torque bit\\\'s
Carburetor needed cleaning
Tool Type
Blower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver
Engine would run under a load.
Tool Type
Engine
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, Air Compressor, Scraper, Carb Cleaner
2. Dissembled carb, cleaned gas tank, replaced carb diaphragm.
3. Reassemble.
4. Replaced pull rope.
the site had parts necessary and shipped them promptly, great company to work with.
Recommend them highly.
Motor had set up for several years. Gaskets and grommets were bad.
Tool Type
Engine
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Socket set, Wrench Set, Star bit set
Gas powered pump set too long, fuel went bad and carb diaphragm needed replacement.
Tool Type
Engine
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Wrench Set, Nutdriver
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.