866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST

Blade

Part Number: 95103E701MA
Murray
Availability: 25+ in stock
Price: $13.95
Quantity:
Ships within 1 business day

*This part replaces obsolete part #: 095103E701MA and 97-619.

Specifications
Length: 20-9/32"
Center Hole Size: 0.848
Plane: Formed
Width: 2.5
Thickness: 0.187
Cut Direction: RH
Center Hole Shape: Circle
Description:
Genuine Murray replacement part, this item is sold individually.
This blade is used on all the Lawn Tractors listed below.
Some manufacture send out their blades not completely sharpened (For Liability Proposes).
We have an article and video on how to do this in our Repair Center. Or you can have a local lawn shop do this for you.
Make sure you put the new Blade on the same way the old on was on.
Product Information
Manufacturer: Murray
Product Number: 95103E701MA
Classification: Part
Weight: 1.63 lbs.
Shipping: Ships Worldwide
Compatibility

This part is compatible with the following machines:

Murray

Products Compatibility

This item works with the following types of products:

  • • Lawn Tractor
Questions & Answers

What size blade does this model have
richard for model number 405000c8c
Hello Richard, Thank you for your question. The size of this blade is 20-9/32 inches. Hope this helps!
are these (part # E37) blades the only blades available ? currently have original blades installed - heard that Murray had blades specifically for mulching/vacuuming leaves thanx in advance
Richard for model number 405000X8A
Hello Richard and thank you for writing Blade Part # 95103E701MA is in the list of compatible items for your model. The only ones right now that match your model. Hope this helps
Repair Instructions: Submitted by Customers Like You
5 of 5 people found this instruction helpful
Tool Type:
Lawn Tractor
Parts Used:
Blade - 95103E701MA
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Socket set
My blades were in need of replacement.
Use a socket to remove the blade nut and the washers. Note which washer goes where. Remove the old blade, don't lose the blade adapter. Place the blade adapter on the shaft then the blade. Place the washers on in the correct order and tighten the blade nut. Your blades FIT EXCELLENTLY.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Lawn Tractor
Parts Used:
Wheel Bearing - 91334MA
Blade - 95103E701MA
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Wrench Set, Rubber Mallet & Hammer
Bent Blade & worn front wheel bushings
Blades were fairly new, That's why I only replaced 1. Front bushings were wore on the outer side, from tight turns. Used inner for outers, and replaced both front inner bushings. Last bushing installed were from a local vendor, who's no longer in business. They were heavy duty. Also replaced front cotter pins. wheels pushed washer into old pins and cut into them
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Mower
Parts Used:
Nut, 3/8 - 703948
Pulley, Idler - 91801MA
Rod, Pivot - 94957ZMA
Deflector Assembly - 094707MA
Blade - 95103E701MA
Torsion Spring - 166X4MA
Repair Difficulty:
Easy
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, Adjustable Wrench
Old Blade & Pulley
Regular maintenance, oil change, New blade, New Pulley, New spark plug, New Air filter, repair muffler.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Tractor
Parts Used:
Blade Nut - 15X100MA
Splined Spindle Shaft - 94129MA
Blade - 95103E701MA
Jackshaft Housing - 492574MA
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Socket set, Wrench Set, Breaker Bar for all Nuts / Screws
Jack-shilf bearings & shaft wore out, the blades were bad, all new parts purchased fit great.
I used my 2 ton engine lift to raise the lawn tractor mower front end high enough to do the repair job easily. 3 of 5 screws attaching jack-shaft to housing broke. Could not remove the spacer from old main shaft to replace with new shaft. Hardware store for new screws, I had metal tubing on hand to make a new spacer. This old machine is working again.

Thanks, for having all the parts I needed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Tractor
Parts Used:
Blade - 95103E701MA
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set, Wrench Set, Jack
New blades - after 15 years of use
Just as I had lifted the mower up with a jack, my neighbor showed up and insisted that I let him do the repair. He is a professional mechanic and finished the installation in less than 15 minutes; as I watched. He used a box-end wrench on the top and a ratchet socket wrench on the bottom. I handed him the blades.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Tractor
Parts Used:
Blade - 95103E701MA
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Socket set, Wrench Set
Hit a root. Bent blade, broke blade adapter
1. Lift deck to highest level
2. Apply parking brake
3. Install blade adapter in correct orientation
4. Install blade washer/blade/nut. Being careful to correctly seat blade, torque to manufacturers recommendations.
5. Lower deck to lowest position
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 2 people found this instruction helpful
Tool Type:
Lawn Tractor
Parts Used:
Blade - 95103E701MA
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set
Needed new blades
Removed the blade nuts and washers, then the blades
Installed the blades on the spindles and replace the washers and tightened the blade nuts
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Tractor
Parts Used:
Pulley - 690409MA
Idler Pulley - 690387MA
Motion Drive Belt - 37X87MA
Mower Deck Belt - 37X62MA
Blade - 95103E701MA
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set, Adjustable Wrench, air tools
Drive belt and drive belt pulley broken, blades was bad deck idler bad
Remove the deck made repairs on it, removed steering column and broken drive belt idler and drive belt guides. Installed new drive and idler, steering column, and belt guides. Reinstalled mower deck.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Mower
Parts Used:
Washer - 17X165MA
Blade Nut - 15X100MA
Splined Spindle Shaft - 94129MA
Pulley, Jackshaft - 92851MA
Blade - 95103E701MA
Jackshaft Housing - 492574MA
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set, Pneumatic impact wrench
Both blade shafts were bent and bearings needed replacing.
1. Removed the cutting deck from the mower.
2. Used an impact wrench to dis-assemble and remove the components.
3. Replaced the upper pulleys, the spindle shafts, the shaft housings (mandrills) and the cutting blades.
4. Reassembled the components.
5. Replaced the cutting deck.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Tractor
Parts Used:
Pulley - 690409MA
Motion Drive Belt - 37X87MA
Blade - 95103E701MA
Repair Difficulty:
Hard
Time Spent Repairing:
More than 2 hours
Tools Used:
Pliers, Socket set, Wrench Set, Adjustable Wrench, Breaker Bar
Drive Belt Broke on Lawn Tractor
Raised Tractor 3 feet above ground to work on it.
Removed old belt making sure to notice it's path so I could install the new one.
I took pictures to help with my memory!
Reinstalled new drive belt and plastic pulley (which was broken) but had to loosen rear pulley guides on all pulleys.
Had to unbolt and lift up Steering wheel shaft in order to install new belt properly.
Had to unhook link clip near rear pulley to get new belt on properly.
Tightened everything back in place and no more problems.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4
Average Rating (out of 5):
1 Reviews
Click to filter by ratings:
5 stars
0
4 stars
1
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Exact match perfect fit
    The part arrived in great condiction, making for a quick and easy instillation. At the time of order, this part was out of stock, prolonging shipping time. Ordering over a holiday weekend can cause delays in shipping too. This part sees the most wear and tear. It is critical to the operation of the machine. Having a larger stock in this part during the high demend season would be most benfitcal to the custsoms.
    Guest - July 17, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    visa mastercard discover american express PayPal
    HACKER SAFE certified sites prevent over 99.9% of hacker crime.

    fancyboxy