eReplacementParts.com
877-346-4814
Murray Parts
Repair Parts Home
  
Lawn Equipment Parts
  
Murray Parts
  15X100MA Nut.56-18 Reg Unf Z-y

Nut.​56-18 Reg Unf Z-y 15X100MA

OEM part for: Murray, Snapper, Craftsman

Part Number: 15X100MA


Install
Videos!
Nut.56-18 Reg Unf Z-y - 15X100MA:Murray 360 View
Nut.56-18 Reg Unf Z-y - 15X100MA:MurrayNut.56-18 Reg Unf Z-y - 15X100MA:MurrayNut.56-18 Reg Unf Z-y - 15X100MA:MurrayNut.56-18 Reg Unf Z-y - 15X100MA:Murray 360 View
In Stock
Order within the next 8 hours and your part ships today!
Medium 30-60 minutes (7 rated repairs)?
OEM: Original Equipment Manufacturer ?
MurraySnapperCraftsman
Does this fit my product?

Product Description ?

This is a genuine manufacturer-sourced part which is specially designed for use with Craftsman lawn tractors. The hex nut is used to secure the blade of the lawn tractor. A socket wrench will be required to remove the hex nut from the blade. This part is made of hardened steel and is sold individually.

  • 9/16-18
  • Classification: Part
  • Weight: 0.03 lbs.
  • Shipping: Ships Worldwide

Compatibility

This Nut.​56-18 Reg Unf Z-y will fit the following 1463 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.

Murray

Snapper

Craftsman

Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Lawn Tractor Parts
  • Lawn Mower Parts

This part replaces obsolete part #: 722382, 15X100ZMA, 15X100, MU15X100MA

Customer Part Reviews ?

5
Average Rating (out of 5):
6 Reviews
Click to filter by ratings:
5 stars
6
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Fits good
    It got the use it was for
    Guest - August 9, 2023 Verified Purchase
    my obselete deck
    got info if parts would fit my 2004 mower,he assured they would.I had to modify one with thin washer spacer but works great.
    Guest - June 24, 2020 Verified Purchase
    Great experience from start to finish!
    The replacement parts were easy to order. Thanks to the detailed diagram I was able to order the exact parts I needed. Parts arrived quickly & my mower was up & running in no time!
    Guest - May 13, 2020 Verified Purchase
    Quality parts and great service
    All parts ordered were recieved and of the best quality, it took a week to recieve all parts here in South Africa. An honest pleasure to spend money and get absolutely fantastic service. I will definitely use you guys again. Outstanding.
    iGlobal - July 6, 2019 Verified Purchase
    parts easy to find on web site and delivered quickly
    riding lawnmower replacement parts. repaired and cutting grass again. thanks
    Guest - May 7, 2019 Verified Purchase
    Mower parts
    Always had excellent customer SVC. Mower is fixed, like new. Thanks.
    mary lynn - April 25, 2019 Verified Purchase

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Nut.​56-18 Reg Unf Z-y


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Medium 30-60 minutes (7 rated repairs)?

    Both blade shafts were bent and bearings needed replacing.

    Kent - June 14, 2017
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Lawn Mower

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Pliers, Socket set, Wrench Set, Pneumatic impact wrench

    1. Removed the cutting deck from the mower.
    2. Used an impact wrench to dis-assemble and remove the components.
    3. Replaced the upper pulleys, the spindle shafts, the shaft housings (mandrills) and the cutting blades.
    4. Reassembled the components.
    5. Replaced the cutting deck.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    drive belt broke

    kenneth - July 28, 2019
    Tool Type

    Lawn Tractor

    Difficulty

    Expert

    Time

    More than 2 hours

    Tools Used

    Screwdriver, Pliers, Wrench Set, welder, angel grinder,acet torch

    replaced the drive belt once I got the right size.
    then replaced the blades an the deck. had to cut the nuts off the shaft then order new nuts then buy a die to clean up the threads. then tighten everything up then heated one part of the deck up bend it back away from the blade. then welded the broken wheel bracket back on deck then made new pieces to fill in the holes caused by stones flying through the deck. filled the holes then put the deck back on after a little touch up paint. total time about 3 days.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    loose blade stripped threads on shaft

    dennis - July 23, 2019
    Tool Type

    Lawn Tractor

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Socket set, Wrench Set

    had to remove the mower deck to replace the shaft and reinstall deck
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Jack-shilf bearings & shaft wore out, the blades were bad, all new parts purchased fit great.

    roy - August 18, 2018
    Tool Type

    Lawn Tractor

    Difficulty

    Easy

    Time

    30-60 minutes

    Tools Used

    Socket set, Wrench Set, Breaker Bar for all Nuts / Screws

    I used my 2 ton engine lift to raise the lawn tractor mower front end high enough to do the repair job easily. 3 of 5 screws attaching jack-shaft to housing broke. Could not remove the spacer from old main shaft to replace with new shaft. Hardware store for new screws, I had metal tubing on hand to make a new spacer. This old machine is working again.

    Thanks, for having all the parts I needed.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Bad mandrel housing, and broke bolt

    Karl - September 8, 2017
    Lifted front end of mower and placed on 3 ft. 2x4
    Removed mower blade retainer nut , washers and blade found had a broken blade adapter.
    then found mandrel was bad.
    Removed mandrel Bolts which one of them snapped off.
    Removed mower deck pin so front of deck swung down
    Removed Mandrel with pulley etc.
    Removed pulley and put on New mandrel.
    Put mandrel and pulley back into position raising the mower deck and putting pin back in place; had to fight with the belt a little bit. Put bolts in place, tightened them up for mandrel, put blade adapter on then Blade washer and nut and tightened that down and lowered front of lawn mower.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Lawn tractor mower deck needed spindles replaced and new belts.

    Michael - May 3, 2017
    Tool Type

    Lawn Tractor

    Difficulty

    Medium

    Time

    More than 2 hours

    Tools Used

    Socket set, Wrench Set, Air rachet

    1. Removed mower deck from tractor.
    2. Removed belt guards from deck and removed belts.
    3. Removed old blades.
    4. Removed all necessary brackets and pulleys to access spindles.
    5. Removed all three spindles.
    6. Cleaned mower deck, bead blasted rust from deck, primered and painted deck.
    7. Installed new parts in spindles and installed spindles in mower deck, lubed spindles with synthetic grease through grease zerts on spindles.
    8. Reattached all brackets and installed new blades.
    9. Reinstalled pulleys and new belts.
    10. Reinstalled belt guards and reconnected mower deck to lawn tractor.
    11. Adjusted and leveled mower deck to factory specs.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Muffler burnt out, lost nut

    MICHAEL - June 25, 2016
    👍 0 of 1 people found this instruction helpful
    Tool Type

    Lawn Tractor

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Socket set, Wrench Set

    Removed the old muffler, installed new with no un needed heat shields and replaced missing blade nut.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal