Belt Hook 346449-3 - OEM Makita - eReplacementParts.com
eReplacementParts.com
877-346-4814
Makita Parts

Belt Hook 346449-3

OEM part for: Makita

Part Number: 346449-3


Install
Videos!
Belt Hook - 346449-3:Makita 360 View
Belt Hook - 346449-3:MakitaBelt Hook - 346449-3:MakitaBelt Hook - 346449-3:Makita 360 View
In Stock
Ships within 1 business day
Easy Less than 15 minutes (3 rated repairs)?
OEM: Original Equipment Manufacturer ?
Makita
Does this fit my product?

Product Description ?

The Makita Belt Hook is attached to the bottom of the handle assembly on the tool model numbers shown below.
Its purpose is to hook the tool to your belt when not using the tool.

To attach the belt hook to the handle you will also need to order part number 251314-2 Screw.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This Belt Hook will fit the following 241 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.

Makita

Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Drill Parts
  • Impact Driver Parts
  • Hammer Drill Parts
  • Impact Wrench Parts
  • Cordless Drill Parts
  • Engine Parts
  • Screwdriver Parts

This part replaces obsolete part #: 324705-1, 346034-2, 346317-0, 324553-8

Repair Videos ?

Watch the Repair Video for Belt Hook

Customer Part Reviews ?

5
Average Rating (out of 5):
2 Reviews
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Belt hook
    Awesome....
    Guest - November 12, 2020 Verified Purchase
    Happy
    Very Happy with this belt clip
    Don - August 5, 2019 Verified Purchase

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Belt Hook


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy Less than 15 minutes (3 rated repairs)?

    I lost my 2 original Makita belt hooks.

    David - May 26, 2016
    👍 3 of 4 people found this instruction helpful
    Tool Type

    Cordless Drill

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Just screw it to the base of the housing. The mounting screw does not come with the hook, just to let you know.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    All of my power tools are cordless Makitas'. Some do not have belt hooks. I added belt hooks to five of the cordless tools so that I would have them handy when working from a ladder.

    Earl - February 24, 2018
    👍 1 of 2 people found this instruction helpful
    Tool Type

    Impact Wrench

    Difficulty

    Medium

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Power Drill, Cordless Multi-tool, Cordless cutoff wheel, Impact driver

    I selected the best side of the tool upon which to mount the belt hook. Using the multi tool, I then cut a slot through the side of the tool, deep enough and wide enough to insert the belt hook. If the mounting flange of the belt hook mount was too long and protruded through the side of the tool and into the battery mounting slot, I used the cordless grinding tool to shorten the flange.

    Once the mount was properly in place, I drilled a hole through the side of the tool in which to mount a fastening screw; a hole narrower than the diameter of the mounting screw. If the screw was too long because it protruded into the area of the battery, I again used the cutoff wheel to shorten the screw and to point the tip. The tip was pointed by not cutting completely through the center of the screw.

    I did this for each of the five tools that needed belt hooks. Finally I added clear silicone sealant around each of the modifying mounts. All mounts are secure and work as intended.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Extra parts

    Norb - December 28, 2017
    Tool Type

    Cordless Drill

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Screwed the parts on.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal