eReplacementParts.com
877-346-4815
Porter Cable Parts

O-ring 883837

OEM part for: Porter Cable

Part Number: 883837


Install
Videos!
O-ring - 883837:Porter Cable 360 View
O-ring - 883837:Porter CableO-ring - 883837:Porter CableO-ring - 883837:Porter Cable 360 View
In Stock
Order within the next 3 hours and your part ships today!
Easy 15-30 minutes (21 rated repairs)?
OEM: Original Equipment Manufacturer ?
Porter Cable
Does this d-block d-md-none fit my product?

Product Description ?

O-rings are designed to contain thousands of pounds of pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness.

Of the many causes for O-Ring failure, the most common are:

  • Extrusion and Nibbling – O-ring has ragged, tattered edges. These are commonly caused by pressure spikes which shear off tiny “bites” from the o-ring, or caused by clearance gaps.
  • Abrasion – One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that is too rough, contains grit or is too smooth to allow lubrication.
  • Over Compression – O-ring is flattened on both sides and may have a “ring” split along its length. Commonly caused by excessive pressure or heat.
  • Heat Hardening – O-ring has a pitted or cracked surface, and often is flattened on both sides. Caused by temperature exceeding o-ring capacity.
  • Weather/Ozone Cracking – O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching causes similar cracking.

    • Classification: Part
    • Weight: 0.01 lbs.
    • Shipping: Ships Worldwide

    Frequently Purchased Together ?

    Compatibility

    This part will fit the following 13 machines

    Porter Cable

    RN175A Roofing Nailer View Diagrams & Manuals
    BN125 Brad Nailer View Diagrams & Manuals
    BN200 Brad Nailer View Diagrams & Manuals
    FN250B 16 Gauge Finish Nailer View Diagrams & Manuals
    NS150 Narrow Crown Stapler View Diagrams & Manuals
    NS100 Type 1 1" NC Stapler Kit View Diagrams & Manuals
    FN251 (Type 1) Flooring Nailer View Diagrams & Manuals
    J-NS100 (Type 1) 1in Nc Stapler Kit View Diagrams & Manuals
    RN175A (Type 1) Coil Roofing Nailer Power Tool View Diagrams & Manuals
    BN125 (Type 1) 1 1/4in Brad Nailer Power Tool View Diagrams & Manuals
    BN200 (Type 1) 2in Brad Nailer Kit Power Tool View Diagrams & Manuals
    FN250B (Type 1) Finish Nailer Power Tool View Diagrams & Manuals
    NS150 (Type 1) 1 1/2innc Stapler Kit Power Tool View Diagrams & Manuals
    Show More Compatible Models
    Don't see yours? Try searching our site for :

    This item works with the following types of products:

    • Nailer Parts
    • Stapler Parts

    Customer Part Reviews ?

    4.9
    Average Rating (out of 5):
    9 Reviews
    Click to filter by ratings:
    5 stars
    8
    4 stars
    1
    3 stars
    0
    2 stars
    0
    1 stars
    0
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
  • Nail gun repair
    Order was what I expected and I got it very quickly. I have a problem repairing the nail gun but it has nothing to do with the parts I bought. I'm quite happy with my purchase.
    Guest - August 28, 2022 Verified Purchase
    Parts for Airgun
    Quick and easy to order. Fast ship. Good prices.
    Guest - August 19, 2022 Verified Purchase
    Right parts, fast delivery
    perfect replacement!! made the unit work as designed
    Guest - October 16, 2020 Verified Purchase
    Easy Repair
    The website made it easy to order the correct part. Thanks!
    Guest - May 28, 2020 Verified Purchase
    Part of an overhaul
    I ordered several key elements needed to keep my nailer humming smoothly. As always it was a simple process and everything was ordered, shipped and installed within the week. No downtime, ready for the next project! Thanks guys for doing what you always do, a great job.
    Freddie - February 13, 2020 Verified Purchase
    Easy repair
    Parts were exact match and had me back up and going in minutes.
    Guest - October 2, 2019 Verified Purchase
    Nailer repair
    Fast shipping, fit well, easy repair, nailer works great!
    Guest - August 3, 2019 Verified Purchase
    worked great.
    Right part for the job
    Guest - June 22, 2019 Verified Purchase
    all parts ordered
    all the parts ordered arrived in a timely fashion and corrected the problem
    Guest - February 8, 2020 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for O-ring


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (21 rated repairs)?

    Nailer leaked air

    William - November 25, 2022
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , Allen wrench

    Removed top and replaced collar and o ring
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Collar broken, was leaking air on top

    Esteban - December 6, 2020
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , Allen wrench

    No special instructions needed, just take out the 4 bolts, and replace broken collar and o ring
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Piston not returning. Air leaking from top of cylinder.

    John - March 23, 2020
    Tool Type

    Nailer

    Difficulty

    Medium

    Time

    1-2 hours

    Tools Used

    Screwdriver, Pliers, Torx Driver

    When head was removed I found broken plastic parts. Ultimately I ended up replacing O rings, all cylinder head valve plastic parts and the piston ring (although that was probably not really necessary). Biggest problem was the poor quality of the Porter Cable exploded parts diagram and the difficulty in identifying which parts to order. The FN250B is now back together and works perfectly.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Blowing air constantly

    Edward - January 6, 2020
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , Allen (hex) wrench 4mm

    1. Removed 4 cap screws.
    2. Removed top of cylinder
    3. Removed old disintegrated "O" ring which had turned an Orange color
    4. Installed new "O" ring
    5. Re-attached top of cylinder, cross pattern tighten cap screws.
    6. Verified operation of nailer.
    7. All done is about 5 minutes.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Nailer: broken cylinder.

    Gary - February 22, 2019
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Pliers, Allen

    Removed all of the internal parts. Salvaged usable gaskets and rings. Checked everything for wear and then replaced the cylinder in the casing. Put the cover back in place and I was back in business.
    The parts were exactly what I needed.
    By the way, thank you YouTube.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Missing parts and o-rings dry

    Kelly - May 20, 2018
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Power Drill, Pick set, hex key, wash vat, compressed air

    Disassembled
    Removed and replaced parts
    Reassembled
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Leaking air

    Ronald - May 4, 2018
    Tool Type

    Nailer

    Difficulty

    Medium

    Time

    Less than 15 minutes

    Tools Used

    , Allen Wrench

    1. Removed rear cover
    2. Removed deteriorated head gasket
    3. Replaced head seal valve and o-ring
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Older unit,, needed rebuild

    Steve - April 27, 2018
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    , Allen wrench

    Removed old components,,,
    installed the recommended parts,,
    I would recommend ereplacementparts ,,, good experience !!!
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Nail gun leaked air & wouldn't fire and lost retainer on trigger pin

    David - March 12, 2018
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    , Allen wrench

    Removed cap, examined & removed old parts, installed new, replaced cap and tightened firmly.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Finish nailer air leak (from top)

    Daniel - February 25, 2018
    Tool Type

    Nailer

    Difficulty

    Medium

    Time

    15-30 minutes

    Tools Used

    Wrench Set

    Removed cylinder housing, then removed piston
    Replaced piston cap (vinyl) and all O-rings; applied thin veneer of machine oil to ensure good seal, carefully re-threaded plunger shaft, spring, and piston, then tightened housing bolts

    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal