Easy
15-30 minutes
Genuine Waring replacement part, this item is sold individually.
This part acts as a seal for the blenders shown below.
It is installed along with other seals and washers underneath the cutter assembly, to prevent leaks from coming out of the bottom of the container.
Over time these seals and washers will become brittle and compressed, then will have to be replaced.
Washer 003509
OEM part for: Waring
Part Number: 003509
$4.99
In Stock
Order within the next 5 hours and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Washer will fit the following 248 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Waring
Show More Compatible ModelsThis item works with the following types of products:
- Blender Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Parts were exactly what I needed
The washers took a while to get here (they were back ordered) but once they arrived they worked like a charm and our old blender is back amongst the living again. Everything was very clearly labeled and was easy to assemble. I'd definitely purchase from them again.
iGlobal -
February 8, 2022
Verified Purchase
Fixed a 48 year old kitchen blender.
What a great find. My wife has a blender that no longer leaks out the bottom.
Easy fix.
James -
August 29, 2019
Verified Purchase
Very easy to replace. Nut tightens counter-clockwise.
Piece was same good quality as OEM. Once I figured out the loose nut on underneath section of the blender screwed tight counter-clockwise it was easy to put back together. That is the trick with replacing any of these parts on the blender. This is the nut that comes loose causing the blender to leak.
David -
June 24, 2019
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Washer
How many of these gaskets are required under the blending assembly? Also, how do I know when the blending assembly needs to be replaced? My blender is quite old! Thank you!
May
for model number 51BL23
asked on 2022-02-05
Hello May, thank you for writing. Under the blade, is part 009724, 003509, 003537. We hope this helps.
eReplacementParts Team February 05, 2022
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Leaky glass canister
Mark - April 28, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Blender
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Just followed replacement parts diagram. It took no time at all. Thank you, no more leaks.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Leaking from use over time
Dan - May 8, 2020
Tool Type
Blender
Difficulty
Medium
Time
1-2 hours
Tools Used
Adjustable Wrench
Remove coupling
Big crescent wrench to hold nut securing blade assbly, smaller crescent to loosen clockwise on bottom of blend. Remove blade assbly, replace 1 rubber gasket, 2 plastic gaskets, 2 stain. Steel washers and small washer under coupling. Use parts diagram to see order of installation, part numbers and quantity needed. Reassemble, test for leaks. Voila, remember to tighten/ install button nut counterclockwise.
Big crescent wrench to hold nut securing blade assbly, smaller crescent to loosen clockwise on bottom of blend. Remove blade assbly, replace 1 rubber gasket, 2 plastic gaskets, 2 stain. Steel washers and small washer under coupling. Use parts diagram to see order of installation, part numbers and quantity needed. Reassemble, test for leaks. Voila, remember to tighten/ install button nut counterclockwise.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The blender was leaking
John - February 25, 2020
Tool Type
Blender
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Did not require tools
Parts Used
Removed the clip on bottom of container and pulled out the blade unit. I then installed the washer, placed the blade unit back in the container and re-attached the clip on the bottom. I also want to commend the person(s) taking the time to help me find the correct part. Both times I called for parts, both employees were courteous and very helpful to me and I appreciated their patience.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
blade assembly broke.....
Nick - February 15, 2020
Tool Type
Blender
Difficulty
Easy
Time
30-60 minutes
Tools Used
, none
......... just followed the diagram... easy to do... save me from throwing. out a great blender.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Blenders (2) were leaking
Dave - January 2, 2019
Tool Type
Blender
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers
I was able to change all the washers on one of the blenders to get it to stop leaking. I think I am missing a piece or two on the other one as it still leaked. I will need to get more parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Leaking
Angela - November 7, 2018
Took the shaft apart, replaced the two neoprene washers, and reassembled it making sure all parts stayed in the right order.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Hot liquid sprayed through lid
Judith - November 29, 2017
Tool Type
Blender
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, No tools needed
Parts Used
Replaced the old lid with new. Perfect fit. Blender works like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Leaking at base of blender jar around blender assembly and gaskets
JANICE - July 24, 2017
Tool Type
Blender
Difficulty
Medium
Time
15-30 minutes
Tools Used
Wrench Set
1. Disassembled my bad blending assembly using my hand and a wrench for added pressure on the nut that was not easy to unscrew
2. Cleaned the residue and scraped off the bad white deteriorated gasket from the base of the blending jar.
3. Installed the new blending assembly taking care to note the order of the washers and gaskets on the inside and outside of the blending jar.
2. Cleaned the residue and scraped off the bad white deteriorated gasket from the base of the blending jar.
3. Installed the new blending assembly taking care to note the order of the washers and gaskets on the inside and outside of the blending jar.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
My 60 year old Waring blender needed new washers in the blender jar
Maria - September 3, 2016
Tool Type
Blender
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set
My husband removed the motor assembly with a socket wrench and took off the old washers and replaced them with the new ones we ordered. The blender works perfectly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Container was cracked and leaking
Jess - August 26, 2016
Tool Type
Blender
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, Socket set, Adjustable Wrench
Used pliers to hold blade assy. While I used socket set to loosen the bottom
Removed all parts and washers
blade assy. Still good so I kept it
reattached all parts and new washers to new container in the same order the came off
and tightened filled with water and checked for leaks, none found, ready to use.
Removed all parts and washers
blade assy. Still good so I kept it
reattached all parts and new washers to new container in the same order the came off
and tightened filled with water and checked for leaks, none found, ready to use.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
