eReplacementParts.com
877-346-4814
Metabo HPT (Hitachi) Parts

Urethane Ball 890301

OEM part for: Metabo HPT (Hitachi)

Part Number: 890301


Install
Videos!
Grid squares measure 1x1 inch
In Stock
Order within the next 5 hours and your part ships today!
Easy 15-30 minutes (6 rated repairs)?
OEM: Original Equipment Manufacturer ?
Metabo HPT (Hitachi)
Does this fit my product?

Product Description ?

Genuine Hitachi power tool replacement part designed for use on Hitachi Staplers and Nailers. This part is made out of Polyurethane and it is Sold Individually. This part is important for Trigger Valve assembly. Since it is made out of Rubber this part will wear out over time and would need to be replaced.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This Urethane Ball will fit the following 64 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.

Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Nailer Parts
  • Stapler Parts

This part replaces obsolete part #: 875645, 875-645

Customer Part Reviews ?

4.7
Average Rating (out of 5):
3 Reviews
Click to filter by ratings:
5 stars
2
4 stars
1
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Framing gun
    Work good no more leaking air
    Kevin - May 11, 2023 Verified Purchase
    As expected.
    Arrived quickly, great online shopping experience.
    Michael - May 27, 2020 Verified Purchase
    Brought back a trusted old friend
    My favorite old finish nailer took bad turn 20 years ago , needed parts , thought one day I'll get it repaired ! Found this place , had all the parts and assembly diagrams ! Order arrived as stated , parts fit perfectly and now .. we are working together again ! Hitachi nt65 A circa mid 90s , great gun ! Thank you to the lovely girl that helped on the order ! Highly recommended !!!
    Guest - May 15, 2023 Verified Purchase

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Urethane Ball


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (6 rated repairs)?

    Air leaked from trigger

    Michael - August 11, 2017
    👍 3 of 3 people found this instruction helpful
    Tool Type

    Nailer

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    , Allen wrenches, small punch to remove trigger drift pin

    1) Drove trigger pin out.
    2) Remove trigger assy.
    3) Replaced valve packing and urethane ball and plunger o-ring
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    The trigger would no longer worked

    Joseph - December 25, 2016
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Pliers, Roll pin punch & brass hammer

    I punched out the trigger roll pin with a roll pin punch of the correct diameter
    Removed the trigger and plunger assembly after loosening the trigger valve nut with adjustable pliers gripping the outside of the nut since I didn't have a spanner type tool that would fit the slot in the top of the nut
    Replaced the urethane ball, trigger plunger and installed the new O-rings and valve packing
    Re-installed the plunger assembly and trigger and tapped the roll pin back in place
    Put the air hose on the tool and successfully fired about 7 16d nails into a piece of wood
    Works like new again
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Leaking air from top and trigger

    Mark - April 20, 2020
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Allen wrench

    Removed head cap and trigger assembly and installed new head cap valve, exhaust valve, exhaust o-ring and urethane ball.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Air was leaking from the trigger.

    Calvin - March 16, 2019
    I removed the trigger assembly and replaced broken parts
    Replaced o rings.

    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Leaking air in several places

    Rhett - March 12, 2018
    Tool Type

    Nailer

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    , Allen wrench

    Removed end cap and driver guide { nose piece } replaced nose piece gasket, replaced damaged o-ring re-assembled gun and tested. Gun good to go.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Air leak, seal failed

    JERRY - April 29, 2016
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , SPANER WRENCH

    Knock out roll pin for trigger & unscrew valve to replace seal & ball
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal