Medium
30-60 minutes
This replacement tapping screw is a genuine OEM sourced item. It is special hardware use with Makita power tools. This screw has multiple applications depending on the tool. Please make sure to check appropriate diagrams for correct location and use of this item. This pan-head screw is sold individually. You will need a phillips screwdriver to install or remove this screw.
Tapping Screw (w/flange) D4x20 301653
OEM part for: Metabo HPT (Hitachi)
Part Number: 301653
$4.99
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Tapping Screw (w/flange) D4x20 will fit the following 298 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Metabo HPT (Hitachi)
WR25SEM 1 Inch Square Drive Ac Brushless, Ahb Aluminum Housing Body, Ac/Dc, 740 Ft/Lbs Impact Wrench
Show More Compatible Models
This item works with the following types of products:
- Circular Saw Parts
- Saw Parts
- Chop Saw Parts
- Table Saw Parts
- Drill Parts
- Grinder Parts
- Impact Wrench Parts
- Jig saw Parts
- Miter Saw Parts
- Hammer Drill Parts
- Rotary Hammer Parts
- Sander Parts
- Screwdriver Parts
- Impact Driver Parts
- Demolition Hammer Parts
- Cordless Drill Parts
- Router Parts
- Engine Parts
- Reciprocating Saw Parts
- Planer Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Tapping Screw (w/flange) D4x20
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Control handle broke when miter saw fell of table
Gary - January 1, 2019
Tool Type
Miter Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Power Drill, Electric impact
Basically tore saw down replaced broken parts and reassembled/
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Jobsite miter saw was dropped breaking the carry handle
Paul - January 29, 2018
Tool Type
Miter Saw
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Wire stripper/crimper
Removed screws on broken handle/housing to expose wiring harness. Unhooked wires to feed through housing. Pulled harness from housing, and removed inner most handle/housing. Replaced broken parts, and reattached wiring. Also removed and replaced broken trigger handle assembly and fitted new safety switch. Replaced all screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Both handles were broken and switch was defective
Anthony - August 31, 2016
Tool Type
Miter Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Nutdriver
Installed two carbon brushes.
Installed new switch and replaced two handles, left and right,
Installed new switch and replaced two handles, left and right,
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
