Easy
15-30 minutes
This is a genuine OEM replacement part, it is sold individually.
This spring is used in a number of String Trimmers and Brush Cutters.
This Spring is part of the String advancing system.
It is placed in between the spool and the spool housing.
Over time the spring will lose its tension and will have to be replaced.
Spring 06713
OEM part for: Ryobi, Homelite, Toro, Craftsman
Part Number: 06713
$4.99
In Stock
Order within the next 3 hours and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Spring will fit the following 579 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Ryobi
51978 51978-320000001 And Up 18 Inch Gas Trimmer - Straight Shaft Mfg. No. 090309046 3-1-20 (Rev:01)
Homelite
Toro
Craftsman
Show More Compatible ModelsThis item works with the following types of products:
- Trimmer Parts
- Pruner Parts
- Hedge Trimmer Parts
This part replaces obsolete part #: 690140011, 532406713, UT15522D-05, 99068001004, 98848, 099068001004, B06713, UP06526, 678022001
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
18
4 stars
0
3 stars
0
2 stars
1
1 stars
1
< PREV
- 1
- 2
Correct spring will get machine working again
The springs for line trimmer are the correct ones arrived in good time ordering was easy and a good price great to be able to find them as they are not available in Australia
iGlobal -
October 9, 2023
Verified Purchase
Just what I needed for My Ryobi grass trimmer. Perfect fit for bumphead.
Fast shipping, good price and perfect fit. Ordered 3 for two spares.
Guest -
July 7, 2023
Verified Purchase
Best website and service!
This is the easiest website we have ever found to find and order what we are looking for. Have ordered many replacement parts for our lawn equipment over the years. We always get just what we needed and it arrives quickly!
Guest -
June 28, 2022
Verified Purchase
Easy
Great service
Guest -
June 21, 2021
Verified Purchase
Easy to replace and no real issues
Parts arrived quickly and were easy to replace.
Guest -
July 9, 2020
Verified Purchase
Easy repair.
Fit perfectly.
Guest -
June 17, 2020
Verified Purchase
Lost the spring in the step
The spring is great, took a little while to get here but fully understandable in these times, thanks
Guest -
June 17, 2020
Verified Purchase
Easy repair
Part I ordered only took a few days to get here. Works good.
Guest -
March 21, 2020
Verified Purchase
Flawless transaction and repair
Exactly what was ordered delivered as promised.
Guest -
October 10, 2019
Verified Purchase
Replace primer bulb and spring for line feed
Both of the parts fit perfectly and worked as expected. Obviously saved a lot of money by being able to do the repair myself. You detailed diagrams gave me confidence I was buying the correct replacements parts. Those were very helpful. Overall, a great experience.
Guest -
September 25, 2019
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Spring
Does the trimmer spring just rest up against the string spool when installed?
Glenn
for model number Homelite Trimmer UT-21506
asked on 2022-05-15
Hello Glenn, thank you for your question. The information we have for installation hopefully answers your question. 1. Removed bolt from line housing. 2. Remove the line spool. 3.Remove housing.4.Reverse process while using new spring and housing. 5 Feed line through eyelets in housing and put spoil in place. 7 Install bolt to secure parts in place. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
eReplacementParts Team May 15, 2022
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The filter cover wouldn't stay on because the filter base was broken.
Mark - January 13, 2017
👍 2 of 2 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
1. Removed the 2 screws from the filter base
2. Removed the filter base
3. Cleaned around the carburetor
4. Screwed on the new filter base
5. Replaces the filter cover
2. Removed the filter base
3. Cleaned around the carburetor
4. Screwed on the new filter base
5. Replaces the filter cover
Did you find this story helpful?
Thanks for voting and helping fellow customers!
New spool and spring
Al - November 3, 2016
👍 2 of 2 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Parts Used
Wound the string on the new spool then placed it in the housing and used the bumper nut to hold it in place.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Eyelets in housing was worn to point that line wouldn't feed
Carl - October 16, 2016
👍 3 of 4 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, Pliers and side cutters for cutting line
Parts Used
Removed bolt from line housing
Remove the line spool
Remove housing
Reverse process while using new spring and housing
Feed line through eyelets in housing and put spoil in place
Install bolt to secure parts in place
Remove the line spool
Remove housing
Reverse process while using new spring and housing
Feed line through eyelets in housing and put spoil in place
Install bolt to secure parts in place
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broken Throttle Cable
Anthony - October 9, 2022
Tool Type
Trimmer
Difficulty
Medium
Time
30-60 minutes
Tools Used
, Torx Screwdriver
Parts Used
Separate two halves of plastic throttle trigger assembly. Remove screw securing power head to aluminum driveshaft tube, separate head from tube. Slide rubber guard off tube. Remove pressed-in plastic cable holder. Insert new throttle cable in rubber guard, then slide guard, with cable inside it, onto tube. Reattach power head to tube. Attach throttle cable onto carburetor. Route throttle cable into trigger assembly, reinstall screws to secure halves. Press plastic cable holder into place. Take pictures before disassembly, can be helpful at times.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
lost spring, replaced it.
Robert - August 6, 2020
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, none
Parts Used
replaced lost spring
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Lost the spring
Richard - June 16, 2020
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, None
Parts Used
Just replaced the spring.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
String housing was worn and spring was missing
DANA - June 5, 2019
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Scissors to cut new string.
Just followed the directions you had on the net.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Need spool and spring, etc.
michael - August 25, 2017
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers
Replaced the spool housing, the spring and screwed on the spool retainer
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Line wouldn't feed properly.
Danny - August 12, 2017
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers
Removed all parts and assembled in reverse order. Easy doings.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Spool melted and took out all parts in lower unit
Kenneth - August 2, 2017
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Wrench Set, Nutdriver
Disabled the parts ,spool ,grass shield ,line guard . Then put it back together using exploded parts diagram.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
