Easy
Less than 15 minutes
The trailing shield is secured in the back of the mower deck to keep grass clippings under the deck. It is an authentic item that is supplied by original equipment manufacturer for use with Toro walk-behind lawn mowers. It is made with high quality plastic and it is sold individually, please note the hardware to secure it is sold separately.
Shield-trailing 139-6604
OEM part for: Toro
Part Number: 139-6604
$18.40
In Stock
Order within the next 9 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This Shield-trailing will fit the following 141 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
- Lawn Mower Parts
This part replaces obsolete part #: 120-7012, 115-2893
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
8
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Exactly as ordered.
Arrived quickly. Just what I ordered.
Guest -
June 29, 2024
Verified Purchase
Easy repair
A+A +
Guest -
September 15, 2022
Verified Purchase
Exact match
The part arrived in Canada in a reasonable amount of time. Well packaged, no damage.
iGlobal -
June 3, 2021
Verified Purchase
Quick and Easy
Very easy installation.
Gerald -
April 5, 2021
Verified Purchase
Replacement part for lawn mower
Easy install, perfect fit!
Guest -
October 23, 2019
Verified Purchase
Easy repair Good quality
This was easy to repair. Very good quality product
Guest -
July 18, 2019
Verified Purchase
Easy repair.
On time delivery. Arrived in perfect condition.
Guest -
April 29, 2019
Verified Purchase
Simple To Replace!
The new part arrived quickly, it was simple to install and it was quality merchandise.
Guest -
April 29, 2019
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Shield-trailing
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Original trailing shield had been cut by the mower blade when pulling the mower backwards. Replacement shield design will likely eliminate this issue from happening again.
Russell - April 14, 2016
👍 5 of 5 people found this instruction helpful
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Replace shield when mower gas tank is at or near empty. Tip mower onto one side and remove mounting screw on that side with Phillips head screwdriver. Repeat for other side. Mount new shield using original screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The trailing shield was damaged and needed to be replaced.
Marvin - April 1, 2016
👍 4 of 4 people found this instruction helpful
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
The screws had to be removed to take off the old part. I put the new part on and put the screws back in and the job was complete.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
shield trailing fell off and was devoured by the mower
janice - June 20, 2021
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, nothing
Parts Used
Just slipped it on in 2 sec. So easy even a preacher could do it (and did).
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Training shield wore out.
Stephen - September 13, 2020
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
1. Remove 2 screws and old shield.
2. Install 2 screws and new shield.
2. Install 2 screws and new shield.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Traction cable end was broken, spring was broken, original shield was torn.
Robert - May 27, 2020
Tool Type
Lawn Mower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set, Wrench Set
Removed old parts and installed new ones.
Easy-easy...
Torsion spring required a little muscle to remove the mounting bar across the handle.
Easy-easy...
Torsion spring required a little muscle to remove the mounting bar across the handle.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Trailing shield was busted
Janice - April 23, 2020
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers, None
Parts Used
Old part off; new part on.
So easy a preacher did it.
So easy a preacher did it.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Shield broke off
jerry - August 16, 2018
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed two screws put shield in place, put two screws back into place.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Rear shield wore out after years of use
Michael - November 14, 2016
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, No tools needed
Parts Used
Remove the screws holding the old one and remove it. Install the new one with the screws
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Repair shop lost bracket and old shield broken
Hugh - August 29, 2016
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set
1. Slid shield into position
2. Unhooked cable end from handle
3. Unscrewed bolt and replaced bracket
4. Rehooked cable end
2. Unhooked cable end from handle
3. Unscrewed bolt and replaced bracket
4. Rehooked cable end
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Replaced air filter -and trailing shield.
Vernon - June 7, 2016
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
The air filter was easy just remove the cover and old filter then replace. The trailing shield was just a few bolts to undo then mount the new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
