Easy
30-60 minutes
This is an authentic replacement part manufactured for use with Ridgid 1/4 sheet sanders. The dust shield is used to prevent sanding dust from entering the motor, but allows air to pass to cool the motor. This dust shield is sold as an individual replacement part, please see model diagram for associative parts.
Shield Dust 560671002
OEM part for: Ridgid
Part Number: 560671002
$4.99
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Compatibility
This item works with the following types of products:
- Sander Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Shield Dust
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Malfunction due to parts wear and tear.
Alfredo - June 29, 2017
Tool Type
Sander
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Power Drill
Disassemble completely the sander, clean, remove the old and damaged parts. Mount the new ones. Assemble and test the tool.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bearing for sanding pad disentigrated.
John - June 20, 2016
Tool Type
Sander
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
1. Removed 4 screws holding sanding pad to base.
2. Removed old parts.
3. Installed new collar, bearing and dust seal.
4. Reinstalled sanding pad making sure to align pad to base.
5. Installed & tightened the 4 screws.
6. Plugged in sander and tested it's operation.
7. It worked fine, Job complete.
2. Removed old parts.
3. Installed new collar, bearing and dust seal.
4. Reinstalled sanding pad making sure to align pad to base.
5. Installed & tightened the 4 screws.
6. Plugged in sander and tested it's operation.
7. It worked fine, Job complete.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bearing failure
William - January 19, 2016
Tool Type
Sander
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Torx
Remove 4 screws from the old pad and platen and remove. Remove the worn bearing and collar from the fan. Install new collar and bearing, replaced the dust shield. Then installed the new platen and pad.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
