Easy
Less than 15 minutes
This replacement screw is a high quality hardware that is commonly utilized on Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. It has multiple applications depending on the unit, please make sure to check appropriate diagrams of your mode for correct location and use of this screw. Note that this hex head scrwe is sold individually.
Screw 690940
OEM part for: Briggs and Stratton
Part Number: 690940
$4.99
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Screw will fit the following 20533 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Briggs and Stratton
Show More Compatible ModelsThis item works with the following types of products:
- Engine Parts
This part replaces obsolete part #: 94511
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Screw
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Very old mower. Took apart housing and took off starter rope clean around engine. Needed several screws to properly reassemble
Robert - May 21, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set
Parts Used
Repair/cleaning of external mower parts was easy. And replacing the spark was also.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Missing Screws
George - June 11, 2020
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Nutdriver
Parts Used
1. Remove two Philips head screws holding the upper plastic engine cover in place and place the cover to the side.
2. Align the gasoline tank with the threaded inserts in the upper metal engine cooling baffle.
3. Install three shoulder screws and torque.
4. Replace the upper plastic engine cover and align attach holes.
5. install two Phillips head screws.
2. Align the gasoline tank with the threaded inserts in the upper metal engine cooling baffle.
3. Install three shoulder screws and torque.
4. Replace the upper plastic engine cover and align attach holes.
5. install two Phillips head screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Mower sat for 2 years. Gaskets leaked, carburetor clogged, engine ran extremely rough.
Robert - May 24, 2018
Tool Type
Lawn Mower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Socket set, Nutdriver, Chisel, steel wool, air compressor, carb cleaner
Removed gas tank, air filter and filter housing to expose carburetor. Removed carburetor and disassembled cleaning all parts with carb cleaner. Scraped remainders of old gaskets off carb with chisel, and steel wool until clean. Use compressed air to blow out any remaining dirt. Installed new gaskets for intake and air cleaner and reassembled with new bowl. Replaced fuel line as well while I was in there and gas tank was off. Screws purchased were to secure gas tank (original ones were lost at some point during the tear down). As far as special instructions, just be sure gaskets are properly aligned before reassembly, and that remnants of old gaskets that were removed are completely cleaned off. Be careful not to over tighten anything, especially the bolts that secure the air filter housing.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Worn wheels, broken washer, and cracked/broken gear guard, and replaced lost screw that held gas tank in place.
John - May 11, 2017
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set, Nutdriver
Parts Used
Removed the worn and parts installed the new ones.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Lost screws over time.
Michael - December 11, 2016
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Socket set
Parts Used
1. Just replaced screws where needed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
