eReplacementParts.com
877-346-4814
Briggs and Stratton Parts

Install
Videos!
Gasket-air Cleaner - 692667:Briggs and Stratton 360 View
Gasket-air Cleaner - 692667:Briggs and StrattonGasket-air Cleaner - 692667:Briggs and StrattonGasket-air Cleaner - 692667:Briggs and Stratton 360 View

Gasket-air Cleaner 692667

Part Number: 692667
Briggs and Stratton
Availability: In Stock
Price: $4.56
Ships within 1 business day
Product Information
Description:
This replacement air cleaner gasket is supplied directly from original equipment manufacturer for use with Briggs and Stratton engines. Its purpose is to provide and air-tight seal between the air cleaner and the carburetor. Over time the material may get compressed and crack eventually requiring replacement to maintain peak performance. Please note this durable composite material is sold individually.
Frequently Purchased With
Compatibility

This part is compatible with the following machines:

Briggs and Stratton
12A600 Series (0100-0112) Engine
12B600 Series (0100-0104) Engine
12C600 Series (0100-0118) Engine
12D600 Series (0015-0119) Engine
11A602-0100-E1 Engine
11A602-0111-E1 Engine
11A602-0113-E1 Engine
11A602-0114-E1 Engine
11A602-0115-E1 Engine
11A602-0125-E1 Engine
11A602-0147-E1 Engine
11A602-0150-E1 Engine
11A602-0151-E1 Engine
11A602-0152-E1 Engine
11A602-0169-E1 Engine
11A602-0170-E1 Engine
11A682-0118-E1 Engine
11A682-0119-E1 Engine
11A687-0108-E1 Engine
11C602-0100-E1 Engine
11C602-0110-E1 Engine
110602-0015-E1 Engine
110602-0100-E1 Engine
110602-0102-E1 Engine
110602-0105-E1 Engine
110602-0112-E1 Engine
110602-0118-E1 Engine
110602-0131-E1 Engine
110602-0133-E1 Engine
110602-0134-E1 Engine
110602-0135-E1 Engine
110602-0136-E1 Engine
110612-0117-E1 Engine
110682-0114-E1 Engine
12E602-0135-E1 Engine
12E602-0136-B1 Engine
12E602-0136-E1 Engine
111602-0100-E1 Engine
111602-0101-E1 Engine
111602-0105-E1 Engine
111602-0136-E1 Engine
111602-0137-E1 Engine
111602-0139-E1 Engine
111602-0141-E1 Engine
111602-0145-E1 Engine
111602-0146-E1 Engine
111602-0149-E1 Engine
111602-0150-E1 Engine
111602-0151-E1 Engine
111602-0156-E1 Engine
111602-0157-E1 Engine
111602-0159-E1 Engine
111602-0162-E1 Engine
111602-0168-E1 Engine
111602-0169-E1 Engine
111602-0172-E1 Engine
111602-0174-E1 Engine
111602-0175-E1 Engine
111602-0176-E1 Engine
111607-0158-E1 Engine
111682-0135-E1 Engine
111682-0138-E1 Engine
111682-0140-E1 Engine
111682-0142-E1 Engine
111682-0143-E1 Engine
111682-0144-E1 Engine
111682-0147-E1 Engine
111682-0148-E1 Engine
111682-0152-E1 Engine
111682-0155-E1 Engine
111682-0163-E1 Engine
111682-0164-E1 Engine
111682-0165-E1 Engine
111682-0170-E1 Engine
111687-0166-E1 Engine
111687-0171-E1 Engine
12F612-0115-B1 Engine
12F612-0115-B2 Engine
12F612-0115-E1 Engine
12F612-0115-E2 Engine
120602-0041-E1 Engine
120602-0100-B1 Engine
120602-0100-E1 Engine
120602-0105-B1 Engine
120602-0105-E1 Engine
120602-0111-E1 Engine
120602-0115-E1 Engine
120602-0119-B1 Engine
120602-0119-E1 Engine
120602-0120-E1 Engine
120602-0121-E1 Engine
120602-0129-E1 Engine
120602-0131-E1 Engine
120602-0135-B1 Engine
120602-0135-E1 Engine
120602-0135-E2 Engine
120602-0137-E1 Engine
120602-0138-E1 Engine
120602-0141-E1 Engine
120602-0143-E1 Engine
120602-0146-E1 Engine
120602-0146-E2 Engine
120602-0150-E1 Engine
120602-0153-E1 Engine
120602-0164-E1 Engine
120602-0182-B1 Engine
120602-0182-E1 Engine
120602-0195-E1 Engine
120602-0200-E1 Engine
120607-0128-E1 Engine
120607-0139-E1 Engine
120607-0154-E1 Engine
120609-0112-E1 Engine
120612-0110-E1 Engine
120612-0117-B1 Engine
120612-0117-E1 Engine
120612-0132-B1 Engine
120612-0132-E1 Engine
120612-0132-E2 Engine
120612-0133-B1 Engine
120612-0133-B2 Engine
120612-0133-E1 Engine
120612-0133-E2 Engine
120612-0149-E1 Engine
120612-0152-E1 Engine
120612-0177-B1 Engine
120612-0177-E1 Engine
120682-0130-E1 Engine
120682-0142-E1 Engine
121602-0015-A1 Engine
121602-0015-B1 Engine
121602-0015-E1 Engine
121602-0016-B1 Engine
121602-0016-E1 Engine
121602-0019-E1 Engine
121602-0021-B1 Engine
121602-0021-E1 Engine
121602-0022-B1 Engine
121602-0022-E1 Engine
121602-0025-B1 Engine
121602-0025-E1 Engine
121602-0026-E1 Engine
121602-0058-E1 Engine
121602-0100-B1 Engine
121602-0100-E1 Engine
121602-0101-B1 Engine
121602-0101-E1 Engine
121602-0112-B1 Engine
121602-0112-B2 Engine
121602-0112-E1 Engine
Expand the 150+ compatible machines
Products Compatibility

This item works with the following types of products:

  • • Engine

Questions & Answers for Gasket-air Cleaner


No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Lawn Mower
Parts Used:
Clamp-hose - 791850
Gasket-intake - 692555
Float-carburetor - 398187
Kit-needle/seat - 398188
Gasket-float Bowl - 693981
Washer-sealing - 271716
Gasket-air Cleaner - 692667
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, old tupperware pan for parts
Briggs& Stratton motor 190cc on craftsman brand mower
1. Removed rope pull mechanism cover air breather. several 5/16 hex screws
2. Removed springs from carburetor choke mechanism.
3. Removed fuel line and fuel tank used 3/8 bolt to plug fuel line. Drained carb into cup.
3. Removed engine cover to have access to auto choke and carburetor.
4. Removed carburetor two bolts.
5. Removed carburetor float bowl,float and needle.
6. Removed existing rubber seat below needle. used e-part number kit 398188 (see e-part diagram).
7. Reassembled all parts. added Fresh Non-Ethanol gas. Runs as good as when it was new. No more surging. No other adjustments needed. Thanks e-replacement parts!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Lawn Mower
Parts Used:
Bowl-float - 796611
Screw - 690940
Gasket-intake - 692668
Gasket-air Cleaner - 692667
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set, Nutdriver, Chisel, steel wool, air compressor, carb cleaner
Mower sat for 2 years. Gaskets leaked, carburetor clogged, engine ran extremely rough.
Removed gas tank, air filter and filter housing to expose carburetor. Removed carburetor and disassembled cleaning all parts with carb cleaner. Scraped remainders of old gaskets off carb with chisel, and steel wool until clean. Use compressed air to blow out any remaining dirt. Installed new gaskets for intake and air cleaner and reassembled with new bowl. Replaced fuel line as well while I was in there and gas tank was off. Screws purchased were to secure gas tank (original ones were lost at some point during the tear down). As far as special instructions, just be sure gaskets are properly aligned before reassembly, and that remnants of old gaskets that were removed are completely cleaned off. Be careful not to over tighten anything, especially the bolts that secure the air filter housing.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Lawn Mower
Parts Used:
Pin-float Hinge - 797622
Float-carburetor - 398187
Kit-needle/seat - 398188
Gasket-air Cleaner - 692667
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set
Hard to start, little power. Black smoke at start. Symptoms indicate flooded carb situation
Suspected problem due to ethanol damage to engine not designed to use it.
1. Drained fuel tank.
2. Removed shroud, air filter assembly and disconnected fuel line. (Good time to replace air filter)
3. Removed carburetor, noting manner of attachment of throttle linkage.
4. Disassembled float bowl from carb.
5. Removed float, needle valve and needle valve seat.
6. Remove old air cleaner gasket.
7. Thoroughly cleaned carb and parts to be reused.
8. Replace needle valve seat per instructions supplied with new part.
9. Replace float and needle valve with new parts.
10. Reassembly float bowl on carb.
11. Reattach carb to engine, including reattachment of throttle linkage.
12. Reinstall fuel line. (Note: I recommend installing an in-line fuel strainer.)
13. Reinstall air filter assembly and shroud.
14. Fill fuel tank
15. Test run engine.
Engine now starts easy and has same power as before.
I try to avoid ethanol in my small engines even in those supposedly designed for it. It's a powerful solvent and a potential troublemaker in my experience.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Mower
Parts Used:
Filter-a/c Foam - 493537S
Gasket-air Cleaner - 692667
Primer-carburetor - 694395
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Socket set
Primer bulb was cracked and torn. I could not not prime the carb.
Removed the air cleaner housing which held the primer bulb using a 10mm socket. Used a screw driver to release the retainer clip from the breather housing which held in the primer bulb. pulled out the bulb and clip. Inspected the clip for chips and cracks to see if it needed replacement, it was in good condition. I then cleaned out the oriface for the bulb and lightly lubed it with a touch of oil. Pushed the primer bulb in place followed by the retainer clip. Put the air breather back on with the new carb gasket, carb side, new paper filter and then the prefilter. Tested the new primer bulb and the engine started on the second try. a clear success.

It was very simple and straight forward.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Pressure Washer
Parts Used:
Filter-a/c Cartridge Mega Pack - 491588B
Filter-a/c Foam - 493537S
Gasket-air Cleaner - 692667
Cover-air Cleaner - 692298
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set
Several parts were missing that had to be replaced
Replaced all necessary parts , power washer runs great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5
Average Rating (out of 5):
4 Reviews
Click to filter by ratings:
5 stars
4
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Great parts!
    Good
    Guest - May 16, 2023 Verified Purchase
    Easy fix!
    The gaskit I replaced was not in bad shape but once you pull the carb off it's integrity has been compromised. The new one fit perfectly and I have not had a problem since.
    Ken - July 19, 2022 Verified Purchase
    Easy ordering
    Thanks for making shopping for small engine parts a breeze
    Guest - March 30, 2021 Verified Purchase
    Fast delivery and easy website to use.
    Fast delivery and easy website to use.
    Guest - October 13, 2020 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal