eReplacementParts.com
866-322-9842
Makita Parts
Repair Parts Home  Power Tool Parts  Makita Parts  664064-4 Power Cord (8-Foot)
Power Cord (8-Foot)

Power Cord (8-Foot)

Part Number: 664064-4
Makita
Availability: 25+ in stock
Price: $16.42
Quantity:
Order within the next 3 hours
and your part ships today!

*This part replaces obsolete part #: 660066-8, 660065-0, 660214-9, 664895-1, 660064-2, 660063-4, 660061-8, 664425-8, 551176-1, 664891-9, 660002-4 and 660320-0.

Product Information
Manufacturer: Makita
Product Number: 664064-4
Classification: Part
Weight: 0.29 lbs.
Shipping: Ships Worldwide
Specifications
  • Length 8 Foot
Length: 6'
Gauge: 18
Wires: 2
Type: Bare Wire
Description:
This power supply cord is a genuine OEM sourced replacement part. It is specially made to supply power from a standard outlet to Makita power tools. A cracked or damaged cord should be replaced before continuing to use the tool. This rubber insulated cord is sold individually. It comes with a rubber sleeve grommet that is not sold separately.

Replacing this power supply cord you will need a screwdriver.

• Remove the housing screws
• Remove the the housing
• Disconnect the old cord wires
• Remove the old power cord
• Secure the new cord in place
• Connect the wires
• Reassemble and test the new cord
Compatibility

This part is compatible with the following machines:

Makita
Expand the 150+ compatible machines
Products Compatibility

This item works with the following types of products:

  • • Band Saw
  • • Blower
  • • Circular Saw
  • • Drill
  • • Electric Drill
  • • Grinder
  • • Hammer Drill
  • • Impact Driver
  • • Impact Wrench
  • • Jig saw
  • • Laminate Trimmer
  • • Nibbler
  • • Planer
  • • Plate Joiner
  • • Polisher
  • • Reciprocating Saw
  • • Rotary Hammer
  • • Router
  • • Sander
  • • Saw
  • • Screwdriver
  • • Shear
  • • Trimmer
Expand List
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
3 of 3 people found this instruction helpful
Tool Type:
Grinder
Parts Used:
Power Cord (8-Foot) - 664064-4
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers
Replaced power cord
Separated the grinder into two parts. Added new terminals and reassembled. Product performed as advertised.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Electric Drill
Parts Used:
Power Cord (8-Foot) - 664064-4
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, wire strippers
The electrical supply connection
The power cord is attached to the switch via a terminal box where you insert the wires and they lock into place. I had to disassemble the terminal connection box to release the old wires. There were numerous very small parts inside the electrical terminal that were very tedious to keep in place and it took some time, good light and a steady hand to reassemble. The power cord attachment was easy and would have been super easy if there had been a screw terminal connection.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Grinder
Parts Used:
Power Cord (8-Foot) - 664064-4
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Needed new cord
Remove one half of the housing, then disconnect the terminals from the switch. You may want to order the terminals because they do not come with a new cord. Attach the terminals to the new cord and connect them to the switch. Put housing together.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Electric Drill
Parts Used:
Dust Cover - 421167-5
Power Cord (8-Foot) - 664064-4
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, wire cutters
Power cord had a broken wire
Removed 6 screws and removed the top half of drill. Removed the old cord wires from the switch, then connected the new cord wires to the switch. Slipped the new dust cover over the trigger and put it back together. Works like new. .
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Electric Drill
Parts Used:
Power Cord (8-Foot) - 664064-4
Switch - 651868-3
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, wire strippers
Trigger switch was defective, after 15 years of use. It was easier to get a new power cord rather than try to get the old one to work.
Split the drill body apart by removing the several screws that hold it together. Gently lift one side away from the other, leaving all the guts lying in one side. Pull the trigger assembly away from the body and pull the wires out of the trigger assembly. Use a small flat head screwdriver to release the wires from the trigger assembly. Keep track of which wire goes where. Put the wires from the drill motor into the appropriate holes, then do the same for the new power cord, and re-install the new trigger assembly into the drill body. Fit the other half of the drill body back to the main half and make sure everything seats well, then replace the screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Grinder
Parts Used:
Power Cord (8-Foot) - 664064-4
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Short in power cord
Simply opened up the housing and remove the terminals from the switch and field. You may want to order the the 2 terminals needed to install cord leads on the switch and field. Then make sure all the internal parts are where the belong. And screw the housing back together.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Jig saw
Parts Used:
Cord Guard - 682502-4
Power Cord (8-Foot) - 664064-4
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Saw was bought in the early nineties,and the cord and cord guard is cracked and wore out.
1. Removed screws from the saw housing.
2. Separated saw housings to expose cord connection.
3. Removed screws from switch.
4. Removed wires from switch.
5. Removed old power cord and cord guard from saw.
6. Installed new cord guard on new cord and connected wires to switch.
7. Mounted switch back into saw.
8. Put saw housing back together and installed screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Planer
Parts Used:
Power Cord (8-Foot) - 664064-4
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, I soldered the terminals rather than the crimping
slice in power cords
removed old cord
added boot and copression sleeve to new cord
measure wire lendth
soldered connectors the use shrink tubin
reassempled
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Grinder
Parts Used:
Power Cord (8-Foot) - 664064-4
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Wire crimp pliers
The old cord had burnt into several times in the past and was getting too short.
1. Make sure the cord to the grinder is unplugged.
2. remove the screws (medium sized phillips screw driver needed) from the left side of the handles and remove the handle.
3. Remove the powercord securing device by taking out the two screws.
4. Lift the trigger along with wiring out of the right side of the handle enough to work on the back end of the trigger.
5. Remove the existing black and white powercord wires from the back of the trigger.
6. Install new terminal ends to the new cord. (wire crimp pliers)
7. Install the new cord, trigger, and handle in reverse from disassembly
8. Plug in new powercord to an outlet and test.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Electric Drill
Parts Used:
Dust Cover - 421167-5
Power Cord (8-Foot) - 664064-4
Switch - 651868-3
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers
Worn switch and cord
1-Removed screws holding 2 halves of drill together
2-Disconnected wires from old switch & cord. Small screwdriver was needed to disconnect wires.
3-Replaced switch , dust cover and cord.
4-Reassembled drill halves.

By taking photos of switch and cord connections before disconnecting wires helped with reassembly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
3.8
Average Rating (out of 5):
10 Reviews
Click to filter by ratings:
5 stars
7
4 stars
0
3 stars
0
2 stars
0
1 stars
3
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • perfect fit
    correct gauge, diameter & length
    Guest - September 14, 2019 Verified Purchase
    Power cord replacement
    replacement power cord was received in short order and I replaced with the help of a short video showing details. Thank you! Stu
    Guest - September 9, 2019 Verified Purchase
    Perfect part, replacement not so much
    The part itself was a direct replacement and I was happy to have found it. The problem was replacing the damaged cord, once I split the case small springs and parts fell out of the trigger assembly, after attempting to put it all back together and realized it would never work again I threw it in the trash. I kept the cord just in case one of my friends may need one someday, as for me, I bought a new drill, works great!
    Guest - August 6, 2019 Verified Purchase
    Perfect fit and prompt delivery!
    Perfect fit and prompt delivery!
    Guest - May 9, 2019 Verified Purchase
    Fast transaction
    Fit perfectly, easy replacement, great parts !
    Patricia - May 8, 2019 Verified Purchase
    Easy repair
    Customer service was excellent. They helped me locate the power cord needed for my drill
    Guest - May 2, 2019 Verified Purchase
    Power cord for Makita recipro saw.
    The cord was exactly what I wanted. Even the cord tail that goes to the trigger switch was the right length. Saw is working great.
    Guest - April 23, 2019 Verified Purchase
    no boot
    The picture clearly shows a stress boot at the end, the one you receive won't have it. Don't know yet whether the "old" one can be re-used but sucks either way. Pictures need to be accurate.
    Guest - June 27, 2019 Verified Purchase
    Cord not as described
    Rubber sleeve grommet (strain relief) as described and shown in the picture is not present. I could have cut one end of my many spare computer cords and have the same thing for free. Returned item.
    Guest - June 25, 2019 Verified Purchase
    Replacement cord for Makita grinder.
    Was not a match for the factory cord. No strain relief.
    Guest - May 1, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Makita
    Product Number: 664064-4
    Classification: Part
    Weight: 0.29 lbs.
    Shipping: Ships Worldwide
    Repair Guides
    Watch the Repair Video for Power Cord
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal

    fancyboxy