866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Power Tool Parts  Makita Parts  682502-4 Cord Guard

Cord Guard

Part Number: 682502-4
Makita
Availability: 25+ in stock
Price: $3.99
Quantity:
Order within the next 21 minutes
and your part ships today!
Specifications
  • O.E.M. Makita replacement cord guard
  • Constructed of strong rubber
  • Helps to reduce cord strain and wear
Description:
This cord guard is a genuine Makita replacement part, and it is a direct replacement for a damaged or missing cord guard. Power tool cords undergo a lot of stress, and these cord guards help to alleviate some of that stress at the weakest point--right where the cord enters the tool. Over time cord guards will deteriorate and eventually require replacement. Keeping a strong cord guard on your tool will help will cord life.



This cord guard is compatible with the tools listed below, but it is not guaranteed to fit any other power tools.
Product Information
Manufacturer: Makita
Product Number: 682502-4
Classification: Part
Weight: 0.01 lbs.
Also Known As: Strain Relief, Cord Protector, Cord Cover, Cord Grip
Shipping: Ships Worldwide
Compatibility

This part is compatible with the following machines:

Makita
4305T Jig Saw
4305T Jig Saw
6013BR Drill
6905H Impact Driver
6951 Impact Driver
9527NB Angle Grinder
9528NB Angle Grinder
9910 Belt Sander
HP1501 Hammer Drill
HP1501 Hammer Drill
1900B Planer
9218SB Sander
6302 Drill
6303 Drill
BO5021 Random Orbit Sander
GV5000 Disc Sander
9045B Finishing Sander
9218PB Polisher
9218PBL Polisher
6000LR Drill
BO5020 Random Orbit Sander
HR2431 Rotary Hammer
5005BA Circular Saw
5005BA Circular Saw
6301LR Electric Drill
6301LR Electric Drill
6403 Electric Drill
6403 Electric Drill
9523NBH Angle Grinder
9526PBH Angle Grinder
BO4530 Finishing Sander
BO5011 Random Orbit Sander
BO3700 Finishing Sander
JR3000VT Reciprocating Saw
JR3000VT Reciprocating Saw
9924B Belt Sander
5820 Circular Saw
5820 Circular Saw
BO5010 Random Orbit Sander
BO5012 5 inch Random Orbit Sander
1902 Planer
3707FC Fixed Base Laminate Trimmer
3708FC Tilt Base Laminate Trimmer
9032 Belt Sander
BO4900V Finishing Sander
N9501BZ Disc Grinder
HP1621F Hammer Drill
HP1621F Hammer Drill
UB1101 Blower
HP1621FK Hammer Drill
HP1621FK Hammer Drill
4302C Electronic Jig Saw
4302C Electronic Jig Saw
4100NH 12A 4-3/8" Masonry Saw
KP0810 7.5A 16000RPM 3-1/4" Planer
1100 3-1/4" Power Planer
1911B 4-3/8" Planer
N1923B 3-1/4" Power Planer
3620 Router
GV5010 5" Disc Sander
9227C Sander
BO5030 5" Random Orbit Sander
3608B Router
BO4510 (USA) Finishing Sander
6408K 3/8" Drill
HP1641K 5/8" Hammer Drill Kit
HP1641K 5/8" Hammer Drill Kit
KP0800K 3-1/4" Planer Kit
BO5031K Random Orbit Sander
BO5041K Random Orbit Sander
6402 3/8" Electric Drill
6402 3/8" Electric Drill
PJ7000 Plate Joiner
4300BV Jig Saw
4300BV Jig Saw

Products Compatibility

This item works with the following types of products:

  • • Band Saw
  • • Blower
  • • Circular Saw
  • • Drill
  • • Electric Drill
  • • Grinder
  • • Hammer Drill
  • • Impact Driver
  • • Impact Wrench
  • • Jig saw
  • • Laminate Trimmer
  • • Nibbler
  • • Planer
  • • Plate Joiner
  • • Polisher
  • • Reciprocating Saw
  • • Rotary Hammer
  • • Router
  • • Sander
  • • Saw
  • • Screwdriver
  • • Shear
  • • Trimmer
Expand List
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Hammer Drill
Parts Used:
Cord Guard - 682502-4
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Allen key
Broken cord
1 cut off old cord
2 replace cord and cord gard
3 replace screws
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Electric Drill
Parts Used:
Cord Guard - 682502-4
Cord Set - 664213-3
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, SOLDERING IRON
CORD GUARD AND CORD SET DAMAGED
TOOK DRYWALL GUN APART REPLACED CORD AND CORD GUARD
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Electric Drill
Parts Used:
Cord Guard - 682502-4
Carbon Brush Set - CB51
Chuck Key 10 - 763420-6
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Wire strippers
Needed all parts ordered for maintenance
Removed handle cover to replace cord guard and reattached cord to switch the replaced both brushes
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Electric Drill
Parts Used:
Cord Guard - 682502-4
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Soldering gun
Power cord old and torn.
Removed the old wires, soldered in the new ones and re-assembled.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Cord Guard - 682502-4
Switch - 651232-8
Cord Set - 664213-3
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Soldering iron - I don’t like crimp- on terminals
Switch was intermittent and power cord was old and tired
I opened the handle by removing 3 screws. The replacement trigger fit right into the handle; it needed 2 ring lug terminals soldered onto the new power cord and connected where the old power cord was. The new cord was already stripped properly, the conductors each needed to be shortened 1-1/2” or so and then clamped under the handles’ built-in strain-relief. The rubber cord guard fit into its built-in nest. The handle parts provide well designed nests and wire guides so carefully replacing the handle half will provide clamping action for the cord guard. The switch fits right in and is well secured. Replacing the handle half and tightening the 3 screws completes the job. There were no printed instructions provided and the 2 replacement electrical wire terminals were not supplied, but any normal human would have no difficulties as the assembly is quite clear and the terminals are available almost everywhere ... I enjoyed this easy little repair project and now my little belt sander works great again, and the replacement power cord is more robust than the original. Ereplacement Parts was easy to use and the employee I spoke with was very knowledgeable and nice to deal with.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Parts Used:
Cord Guard - 682502-4
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, None
Cord was broke and warn.
Removed the handle, swapped out the cord and strain reliever then replaced the handle. Should last another 25 years.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Electric Drill
Parts Used:
Cord Guard - 682502-4
Carbon Brush Set CB-401 - CB401
Chuck Key 10 - 763420-6
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers
Broken brush case. Worn out cord and guard.
1. Opened the drill case (handle) and cleaned out the collected dirt etc.
2. Disconnected the wires from the brushes.
3. Removed the brushes.
4 .Freed up the power cable from the switch (small screwdriver).
5. Soldered the ends of the new power cord and inserted into the switch.
6. Installed the brushes.
7. Replaced the cover.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Circular Saw
Parts Used:
Cord Guard - 682502-4
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, soldering gun
Power cord and rubber strain relief were damaged
Makita reciprocating saw power cord and strain relief replacement -
1. Remove screws to separate the saw handle.
2. Remove the switch assembly from the handle.
3. CAREFULLY open the switch assembly to unlatch the power wires. Pay attention to LINE and LOAD electrical wire orientation.
4. Remove electrical lead and old strain relief and discard.
5. Reassemble the switch assembly.
6. Strip off approximately 1/4 inch of insulation from new electrical lead and solder the exposed wires. You will need to do this in order to push the wires into the switch assembly.
7. Install the new strain relief onto the new lead, paying attention which end will be clamped to the handle.
8. Insert the soldered wires into the switch assembly, note the LINE and LOAD orientation.
9. Install the switch assembly into the proper position on the handle.
10. CAREFULLY test the electrical connection.
11. Reassemble the handle and tighten all screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Cord Guard - 682502-4
Cord Set - 664213-3
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Electrical cord was deterinated
1. Remove 4 screws from top case of sander.
2. Pry up the top case and remove.
3. Remove 2 screws from cord clamp.
4. Disconnect the two wires.
5. Remove old cord & cord guard.
6. Install new cord & cord guard.
7. Connect the two wires and position wires same as original.
8. Reinstall the cord clamp.
9. Replace top case of sander.
10. Secure top case with 4 screws.


Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Electric Drill
Parts Used:
Cord Guard - 682502-4
Chuck Key 10 - 763420-6
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Crimper
Cord and cord guard had dry rot.
1. Removed the drill handel side cover to access the electrical connections.
2. Disconnected and removed the cord and cord guard.
3. Assembled and installed the cord and cord guard.
4. Shortened the new cord black and white wires. Stripped the wire ends. Connected the white wires with closed end splice connectors. Repeated the same with the black wires.
5. Tucked the black and white wires into the handle.
6. Installed the side handle cover.
7. Tested the drill for proper operation.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Cord Guard - ( 682502-4 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Reviews
5
Average Rating (out of 5):
1 Reviews
Click to filter by ratings:
5 stars
1
1 stars
0
2 stars
0
3 stars
0
4 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Perfect
    Have this old Makita disc sander and wanted to refurbish it. All the parts I needed right here with eReplacemnets and d..
    James - 19 days ago Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    visa mastercard discover american express PayPal
    HACKER SAFE certified sites prevent over 99.9% of hacker crime.

    fancyboxy