Part Location Diagram of A369000480 Echo Fuel Filter
See part G-28 in the diagram
Replacing your Echo Trimmer Fuel Filter
( Grid squares measure 1x1 inch )

Fuel Filter A369000480

Manufactured by:
Echo
ERP Number:
ERP11826311
Part Number:
A369000480
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

Easy 

30 - 60 mins 

(128 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is an OEM part sourced directly from the manufacturer. The fuel filter helps to take out all the impurities and debris that could be harmful to the carburetor. This filter is most commonly used in trimmers, shredders, blowers, edgers and chainsaws. The compatible models are listed below. This part is made out of metal and a felt type material. This fuel filter is sold individually. To install this filter you will slide it onto the fuel line, then use a screw diver to position the clamp firmly over the nipple.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Echo
  • Shindaiwa
  • Little Wonder
This part works with the following products:
  • Trimmer
  • Hedge Trimmer
  • Leaf Blower / Vacuum
  • Chainsaw
  • Pole Saw
  • Edger
  • Engine
  • Chipper Shredder
  • Brush Cutter
  • Tiller
  • Water Pump
Part# A369000480 replaces these:
  • A369000480

Videos For installing this part.

?
Replacing your Fuel Filter
Replacing your Fuel Filter

Customer Part Reviews

?
4.9
Average Rating (out of 5):
★★★★★
★★★★★
(36 Reviews)
Click to filter by ratings:
  • 5 stars
    34
  • 4 stars
    2
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(128 rated repairs) ?
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Edger (about 10 years old) wouldn\'t start because the primer pump had worn out.

William from San Antonio, Texas

24 of 24 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Primer Pump:
NOTE - Empty fuel tank before starting any work. Next, be sure to clean area around the Primer Pump before you remove it to avoid dirt/debris from getting in the pump.
1. Remove fuel tank guard/shield with a 3 mm Allen wrench.
2. Remove screws holding the fuel tank to the motor with a Phillips screwdriver. DO NOT remove the fuel line from the tank. Just move the tank out of the way to have access to the Primer Pump bracket.
3. Remove the Primer Pump bracket with a very small Phillips screwdriver.
4. Install the new Primer Pump.
5. Installed fuel tank.
6. Installed fuel tank guard/shield.

Air Filter:
1. No tools required. Air filter cover knob can be removed by hand.

Fuel Filter:
1. Remove the fuel filler cap.
2. Use a stiff gauge wire, or something you can \"hook\" the fuel line with, to pull it out of the fuel tank.
3. Carefully pull the old fuel filter off by hand then install the new fuel filter.
4. Install fuel line and filter back into the fuel tank.

Fill fuel tank with fresh fuel/oil mixture.
Prime pump and start.
Check for fuel leaks around Primer Pump.
Did you find this story helpful?
Thank you for voting!

Fuel filter tube broken off in fuel tank , dirty air and fuel filters, cracked primer bulb

Martha from Matthews, North Carolina

14 of 14 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Replace primer bulb by removing metal plate screws and replacing old bulb. Remove and replace old air filter in same manner. Remove grommet containing fuel lines from opening in fuel tank. Attach new fuel filter to new fuel line and push through opening in new grommet from underside. Install new grommet in tank opening and then push r emaining tubes in proper holes. It is important to wait to install the remaining tubes after the new grommet is in place in order to have enough flexibility to squeeze the grommet to fit the opening in the tank.
Did you find this story helpful?
Thank you for voting!

Echo Trimmer had become hard to start, wouldn\'t run consistently, and died often.

Dale from Mansfield, Texas

13 of 13 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
Installed the carb repair kit, new tank grommet, new fuel filter, and tank vent. Had to adjust the high and low adjustments a bit, but now it starts and runs like a new one!
Did you find this story helpful?
Thank you for voting!

Gas leak at fuel cap & grommet

Mike from Lowndesville, South Carolina

8 of 8 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Removed fuel tank/removed old gourmet & fuel lines from tank /pulled fuel lines & etc loose from carburetor. Thread new lines through gourmet/installed new gas filter before installing gourmet & other lines into fuel tank. Used lite coat of oil on lines to get them through gourmet easier. The gas filter will fit through hole the gourmet c omes out of. When finished there was no more gas leaks & Echo weed eater runs like a new one . I did install a new spark plug which I already had,gap is .026.
Did you find this story helpful?
Thank you for voting!

Would not start easy and would not stay running.

Joseph from Sand Springs, Oklahoma

7 of 7 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
Removed carburetor cleaned , disassembled , replaced parts, and reassembled. will start and run after reassembly.
Did you find this story helpful?
Thank you for voting!

Wouldn\'t Start

Benny from Katy , Texas

6 of 6 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Echo SRM 210 trimmer. Found fuel contaminated. Remove fuel tank, carb and fuel lines. Cleaned the tank, cleaned and rebuilt the carb using Ereplacement kit. Replace the fuel and return lines and fuel filter. Fresh fuel and one pull and it was running!!!! Using the posted ereplacements videos makes the repair easy! You may find less expens ive parts on the net but not the quality of the Ereplacement parts!!!
Did you find this story helpful?
Thank you for voting!

Gasoline leaking from grommet in fuel tank. Old tubes also well worn. Time to replace air filter and spark plug too.

Paul from Morgantown, Pennsylvania

5 of 5 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
1. Removed \"foot\" from the base of the motor.
2. Removed pull starter.
3. Removed fuel tank, all tubes, and grommet.
4. Replaced grommet, tubes, and filters.
5. Also replaced air filter and spark plug.
No more leaks and unit runs well!
Did you find this story helpful?
Thank you for voting!

It was leaking gas

Terri from Gainesville, Florida

5 of 5 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
1. Removed gas tank
2. Replaced parts
3. Cleaned the outter components
4. Put it back together
5. Works like new!!
Did you find this story helpful?
Thank you for voting!

Fuel leak

Tim from Haskins, Ohio

5 of 5 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
My problem was fuel leakage during usage of our Echo blower. The leak was centered around the fuel tank grommet that a pair of lines ran through. It had softened and was no longer sealing around the opening in the tank. I decided to replace the grommet and any line, connector, and filter in the area. A fairly easy fix once the tank was re moved. The most difficult aspect was installing the fuel line on the back side of the carburetor. Once that was accomplished and the grommet was squeezed back into the tank, it was just a matter of reassembly. Parts fit perfect. Thanks!
Did you find this story helpful?
Thank you for voting!

Fuel filter dirty

Linda from PUNTA GORDA, Florida

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Parts Used:
A369000480
Used a pair of forceps to removed the old fuel filter then connected the new filter and placed it back into the tank
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2
  • 3

Model Cross Reference

This part works with the following models:
ERP Number: ERP11826311
Manufacturer Part Number: A369000480
Brand Model Number Description
Little Wonder 2119 Hedge Trimmer - Gas Hedge Trimmer
Little Wonder 2124 Hedge Trimmer - Gas Hedge Trimmer
Little Wonder 2130 Hedge Trimmer - Gas Hedge Trimmer
Little Wonder 2216D Hedge Trimmer - Gas Hedge Trimmer
Little Wonder 2224D Hedge Trimmer - Gas Hedge Trimmer
Little Wonder 2230D Hedge Trimmer - Gas Hedge Trimmer
Little Wonder 2230S Hedge Trimmer - Gas Hedge Trimmer
Little Wonder 2242S Hedge Trimmer - Gas Hedge Trimmer
Shindaiwa 326T Chainsaw - Chainsaw
Little Wonder 6040 Edger - Mantis Edger
Little Wonder 9555 Leaf Blower / Vacuum - Mantis Blower/Shredder Vacuum
Echo CLS-4600 Trimmer - Straight Shaft Clearing Saw
Echo CS-300 Chainsaw - Chainsaw
Echo CS-3000 Chainsaw - Chainsaw
Echo CS-301 Chainsaw - Chainsaw
Echo CS-305 Chainsaw - Chainsaw
Echo CS-306 Chainsaw - C07511001001 - C07511999999 Chainsaw
Echo CS-310 Chainsaw - Chainsaw
Echo CS-330MX4 Chainsaw - Chainsaw
Echo CS-330T Chainsaw - Chainsaw
Echo CS-340 Chainsaw - Chainsaw
Echo CS-3400 Chainsaw - Chainsaw
Echo CS-341 Chainsaw - Chainsaw
Echo CS-345 Chainsaw - Chainsaw
Echo CS-3450 Chainsaw - Chainsaw
Echo CS-346 Chainsaw - Chainsaw
Echo CS-352 Chainsaw - 34.1cc Easy-Starting Chain Saw
Echo CS-360T Chainsaw - Chainsaw
Echo CS-601S Chainsaw - Chainsaw
Echo CS-601SVL Chainsaw - Chainsaw