Part Location Diagram of 530095646 Husqvarna Engine Fuel Filter
See part A-25 in the diagram
Replacing your Husqvarna Trimmer Engine Fuel Filter
( Grid squares measure 1x1 inch )

Engine Fuel Filter 530095646

Manufactured by:
Husqvarna
ERP Number:
ERP9285148
Part Number:
530095646
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

Easy 

30 - 60 mins 

(213 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This Genuine OEM fuel filter is designed to maintain the performance and longevity of your equipment by preventing dirt and debris from entering the carburetor. Located inside the fuel tank, this essential component ensures clean fuel delivery, protecting the engine from potential damage caused by contaminants. Sold individually, the filter is built to meet original equipment standards for fit and function. Over time, the filter may become clogged, restricting fuel flow and making engine starts more difficult. For optimal performance, it should be replaced—not cleaned—at the first sign of blockage or wear.

Frequently Purchased Together

?

Troubleshooting

This part fixes the following symptoms:
  • Will Not Start
  • Engine stops after a few seconds or minutes
This part works with the following brands:
  • Husqvarna
  • Poulan
  • Craftsman
  • Weed Eater
  • Jonsered
  • RedMax
  • Paramount
  • Snapper
  • American Yard Products
This part works with the following products:
  • Trimmer
  • Chainsaw
  • Leaf Blower / Vacuum
  • Brush Cutter
  • Edger
  • Hedge Trimmer
  • Lawn Tractor
  • Lawn Mower
  • Pole Saw
Part# 530095646 replaces these:
530-014362, 530010897, 530014199, 530014362, 530014497, 530014815, 530047004, 5300956-46, 530095646, 530095649,

Videos For installing this part.

?
Replacing your Engine Fuel Filter
Replacing your Engine Fuel Filter

Customer Part Reviews

?
4.9
Average Rating (out of 5):
★★★★★
★★★★★
(93 Reviews)
Click to filter by ratings:
  • 5 stars
    82
  • 4 stars
    10
  • 3 stars
    1
  • 2 stars
    0
  • 1 star
    0
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Ask our experts a question about this part and we'll get back to you as soon as possible!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?
  • 1
Sort by:  
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Would this part prevent the engine from starting
Abraham For model number 358894776 - February 25, 2023

Hello Abraham, Thank you for contacting us. If the spark arrestor on the front of the muffler is clogged or damaged, it can prevent the engine from starting. The other parts to check are the spark plug, the carburetor, a clogged fuel filter, the ignition module, the magnets on the flywheel, and a dirty air filter. Good luck with your repair.

eReplacementParts Team
February 25, 2023

Did this question help you?
Thank you for voting!
I have a Wild Thing 18cc chainsaw and need the purge bulb, the two lines (and possibly a new fuel filter). Do you sell this as a kit. I don't really need 2 ft of each type of line.
Jim For model number P4018WT - March 15, 2022

Hello Jim, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: 530047721 for the Purge Bulb. Part Number: 530069247 and Part Number: 530069216 for the Fuel Lines and Part Number: 530095646 for the Filter. These parts are not sold as a kit sorry, they are only sold separately. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

eReplacementParts Team
March 15, 2022

Did this question help you?
Thank you for voting!
Need to replace fuel filter in Weed Eater FB25 Gas Blower. What part # do I order?
Linda For model number Weed Eater FB25 - October 21, 2023

Hi Linda, Thank you for your question. The part number for the fuel filter is 530095646. We hope this helps!

eReplacementParts Team
October 21, 2023

Did this question help you?
Thank you for voting!
Will this kit be compatible w the Poulan Pro25cc/210mph?
Marte For model number BVM210VS spec 952711937 - March 28, 2023

Hello Marte, Thank you for your inquiry. We have researched the model you have provided and do not show this part as compatible. For your model, the fuel lines and fuel filter are available separately, although the lines are also available as part of the fuel tank. We hope this helps with your repair.

eReplacementParts Team
March 28, 2023

Did this question help you?
Thank you for voting!
Will this fuel line work on my chainsaw
Paul For model number Poulan 2300av - February 26, 2023

Hello Paul, thank you for your question. No, this kit is not compatible to your chainsaw. The correct Fuel filter is 530095646. The Purge Line is 530069216. The Fuel Line is 530069247. The Fuel Line Fitting is 530023877. Good luck with your repair.

eReplacementParts Team
February 26, 2023

Did this question help you?
Thank you for voting!
I need a new fuel Tank with the fuel lines and filter installed and also the two fastening bolts
Peter For model number BVM200FE - December 1, 2022

Hi Peter, Thank you for your question. The fuel tank comes with the fuel lines, but the fuel filter is sold separately. The part number listed under your model number for the fuel filter is 530095646. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

eReplacementParts Team
December 1, 2022

Did this question help you?
Thank you for voting!
i need the fuel tanke with the connections to hook fuel line in to they have broke off and where does the fuel lfilter hook into it was just lieing in botoom of tank
RONNIE For model number fb25 - April 25, 2023

Hi Ronnie, Thank you for your question. The fuel tank listed for your blower comes with the lines. The fuel filter goes inside the fuel tank. We have included a link to some of our YouTube videos that you may reference on how to install the fuel tank and the fuel filter, https://www.youtube.com/watch?v=NPEiWSec7EA and https://www.youtube.com/watch?v=j6d_i1l6dUI. The parts and blower in the video may appear different from yours, but it will give you a general idea on how to install the parts. We hope this helps with the repair!

eReplacementParts Team
April 25, 2023

Did this question help you?
Thank you for voting!

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(213 rated repairs) ?
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Fuel line and fuel filter fell out of fuel tank

Billy from Loon Lake, Washington

196 of 196 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
530095646, 530069247
Watch video on youtube for chain saw fuel line and filter repair. Made it easy!
Did you find this story helpful?
Thank you for voting!

All fuel lines dissolved from age,crumbled and broken.

Donald from Chittenango, New York

52 of 52 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
I have 1996 poulan 2550 super clean 18\" chain saw , last used it in 2005,pulled out of storage to use and primer bulb was cracked, so I purchased new fuel lines,bulb,air and fuel filter. The repair went fairly easy, 3 screws to remove air filter top cover, 4 screws side cover with pull start, 2 nuts that retain air plenum,and carburetor, disconect throttle linkage with needlenose pliers,move air plenum with throttle cable to left side, then able to slide carb and choke lever back to gain access to tank inlet(left side) and return(right side). Removed old line stuck in inlet and return with small diameter philips screw driver,they just tapped through, fished out old fuel filter and bits of old line with hemo stats, new fuel lines had diagonal cut at end which I put white lube on outside of hose at end and fed through holes, large dia is return,small dia is feed,enough to reach in with hemo stats and tug through( hardest part of repair).The next hardest part was figuring out lines, I found a youtube that ereplacementparts did in 2009 that helped me determine that starting from bulb center large dia to return in tank,small dia from bulb goes to top rh side of carb,bottom left side of carb to small dia inlet side of tank, pulled small line from tank and put fuel filter on, lays flat on bottom of tank.I slid the carb back down on studs making sure fuel lines are clear , move air plenum up to carb,then install throttle linkage with needle nose pliers,push air plenum on studs and thread nuts on and tighten evenly , put dab of 30w non detergent oil on foam air cleaner worked in, plulled spark plug , was clean and in good condition. replaced starter housing and top cover, repair time was approximately 1 hour, including coffee break, everything worked fine. Don :)
Did you find this story helpful?
Thank you for voting!

Fuel line replacement

Donald from Dallas , Texas

35 of 35 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Socket set
Parts Used:
530095646, 530069247
Remove carburetor
Take replacement line and cut the end on an angle. Thread it through the hole in the fuel tank.
Install the filter.
Did you find this story helpful?
Thank you for voting!

Poulan Pro 5020 chain saw starving for fuel, despite adjusting the carburetor jets. Fuel hose damaged when I pulled the filter off. Hose looked deteriorated, maybe due to ethanol in the gas.

Kris from Hyde Park, Vermont

33 of 33 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
530095646, 530069599
Grab the weighted fuel filter pickup in the tank with a long-nosed tool and pull it out of the tank far enough to pull off the filter from the plastic fuel tubing. If hose needs to be replaced, pull it out from the carburetor end after removing the shroud. Re-insert the new tubing from the carburetor end, pushing it through the rubber g rommet. Push the new filter on the end of the tubing (no clamp needed) and tuck into the bottom of the tank.
Did you find this story helpful?
Thank you for voting!

Fuel line from gas tank to carb. On chainsaw separated into several pieces

Bruce from Beloit, Wisconsin

30 of 30 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
530095646, 530069216, 530023373
Removed gas tank from chainsaw to remove filter and all pieces of broken gas line, installed new fuel line to filter, then feed filter into tank , reinstalled tank , then routed fuel line thru boot and into carb.
Did you find this story helpful?
Thank you for voting!

Fuel line in gas tank was disintigrated, chain saw would not start

John from Gatesville, North Carolina

26 of 26 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
530095646, 530069247
To get the new fuel line in the tank you must bevel the end, about an inch, with a very sharp knife. Push this end through the hole in the gas tank then reach in with a long, long nose plier and pull the end of the fuel line slightly out of the filler neck, cut off the bevel, install the filter then pull it back so the fuel filter rests o n the tank bottom.
Did you find this story helpful?
Thank you for voting!

Fuel lines completely rotten and broken

Zak from Travelers Rest, South Carolina

22 of 22 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Remove and replace fuel lines. Clean carburetor.

The hardest part was routing the fuel lines through the tank. The lines are larger than the hole, thus creating the seal when installed.
Did you find this story helpful?
Thank you for voting!

Trimmer wouldn\'t start as the bulb would not fill with gas. I also had to replace the fuel line as I pulled it out of the gas tank and couldn\'t get it back in.

Bernard from BEllevue, Michigan

21 of 21 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Socket set
Parts Used:
545195901, 530095646, 530069599
It was really easy as replacing the filter was just removing the old and replacing with the new. I had pulled the old gas line out of the gas tank and couldn\'t get it back in but the new one I bought already had an angle cut end and it went right in. The air filter was also easy to replace.

The biggest challenge since thi s was the first time I replaced a fuel line was learning how to put a fuel line in the gas tank. After trying to put my old one back in for about 30 minutes I found the answer on google and learned the end you will insert needs to be cut at an angle so it goes into the tank.
Did you find this story helpful?
Thank you for voting!

Two Poulan Pro power heads not running

Neal from Fort Worth, Texas

20 of 20 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
The fuel system disintegrates from the ethanol in gasoline, so I ordered the necessary parts; fuel filter and fuel line, purge line (different size), and a primer bulb, if one is needed.. If the primer bulb is tore, cracked, or makes a whistling sound, replace it first. Get a diagram online if your fuel lines are in pieces, but if they are intact, remove the fuel line from the back of the primer assembly, slowly pull the fuel filter and fuel line out through the fuel fill port. Cut your new fuel line\'s end at a diagonal, so that you can insert it through the hole in the gas tank. Slowly push enough through until you can grab it from the fuel fill port. Cut off this diagonal piece so that the end is once again square, and install your new fuel filter. Pull the fuel line back enough so the fuel filter is at an appropriate pickup point, I.e., close to the bottom of the tank while running. Cut the fuel line so that it just connects with the primer assembly. Remove the purge line from the primer assembly and use it to cut a new purge line slightly longer, with a diagonal cut on one end. Feed the diagonal end through the tank wall, and connect the other end to the primer assembly. I was able to do my 2 machines from one fuel line and purge line kit.
Did you find this story helpful?
Thank you for voting!

Hard to start, wouldn\'t stay running.

John from Fort Worth, Texas

19 of 19 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
530095646
Pull the end of the fuel line out of the top of the tank (I used mechanical fingers), replace filter pick-up. Then let the new fuel filter drop to the bottom of the tank.
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2
  • 3

Model Cross Reference

This part works with the following models:
ERP Number: ERP9285148
Manufacturer Part Number: 530095646
Brand Model Number Description
Poulan 031 Trimmer - Line Trimmer
Poulan 033 Trimmer - Poulan String Trimmer Model 033 Parts
Poulan 112 Trimmer - Pro Gas Trimmer
Husqvarna 122HBV Leaf Blower / Vacuum - Husqvarna Leaf Blower Model 122HBV Parts
Husqvarna 124C Trimmer - Husqvarna String Trimmer Model 124C/2006-05 (124C/200605, 124C/2006 05) Parts
Husqvarna 124L Trimmer - Husqvarna String Trimmer Model 124L/2006-05 (124L/200605, 124L/2006 05) Parts
Husqvarna 124R Brush Cutter - Brushcutter
Husqvarna 125B Leaf Blower / Vacuum - 28cc 2-Stroke 170-MPH Gas-Powered Handheld Gas Blower
Husqvarna 125BV Leaf Blower / Vacuum - Husqvarna Leaf Blower Model 125BV Parts
Husqvarna 125BVX Leaf Blower / Vacuum - Handheld Leaf Blower
Husqvarna 125BX Leaf Blower / Vacuum - Handheld Leaf Blower
Husqvarna 125C Trimmer - Trimmer
Husqvarna 125C-CANADA Trimmer - Gas Line Trimmer
Husqvarna 125E Edger - Edger
Husqvarna 125E-CANADA Trimmer - Gas Line Trimmer
Husqvarna 125L Trimmer - Trimmer
Husqvarna 125LD Trimmer - 125 Ld, 20061000001-20064900000
Husqvarna 125LDX Trimmer - Husqvarna String Trimmer Model 125LDX Parts
Husqvarna 125LDXTEST Trimmer - 125ldx Test (2010-06)
Husqvarna 125LSST Trimmer - Gas Line Trimmer
Husqvarna 125R Brush Cutter - Brushcutter
Husqvarna 125R-CANADA Trimmer - Gas Line Trimmer
Husqvarna 125RJ Brush Cutter - Brushcutter
Husqvarna 128C Trimmer - Trimmer/Edger
Husqvarna 128CD Trimmer - 28cc Gas Line Lawn Trimmer
Husqvarna 128CD-LOWES Trimmer - Gas Line Trimmer
Husqvarna 128DJX Trimmer - Husqvarna String Trimmer Model 128DJX Parts
Husqvarna 128L Trimmer - Husqvarna String Trimmer Model 128L/2008-09 (128L/200809, 128L/2008 09) Parts
Husqvarna 128LD Trimmer - Trimmer/Edger
Husqvarna 128LD-LOWES Trimmer - Gas Line Trimmer